Accessories

Products

Home

sbc450

en-US

Document

Product

Shure

SystemOn

8-bay Networked Docking Station            

ULX-D Spec Sheet

SBC850 CAD

SBC450 SBC850 User Guide

8-bay networked docking station charges up to 8 ULXD6 or ULXD8 transmitters equipped with the SB900B Rechargeable Battery.

ULX-D

SBC850

SBC850, 

8-bay Networked Charging Station for ULXD6 & ULXD8 transmitters that are equipped with the SB900A rechargeable battery

SBC850-US

Wireless Workbench 7

The SBC250 Networked Charging Station allows up to two ULXD6 or ULXD8 transmitters that are equipped with the SB900C rechargeable battery to be charged quickly and conveniently. Transmitters simply slide into the charger; it is not necessary to remove the SB900C battery. Bi-color LEDs indicate charging status. When connected to a network, the charging status of each transmitter can be viewed remotely. Transmitter settings or firmware can be updated while the transmitters are in the charger using Shure Wireless Workbench® or SystemOn™ Audio Asset Management software, or through a third-party room control system. The SBC250 can be also be rack or wall-mounted with optional URT3 rack tray.

2-Bay Networked Charging Station            

SBC250 User Guide

<ul>
	<li>Supplies full charges in three hours, 50% charge in one hour</li>
	<li>Charge status bi-color LEDs for each transmitter</li>
	<li>Facilitates transmitter setting adjustments and firmware updates when networked</li>
	<li>Two SBC250 units can be rack or wall mounted side-by-side with URT3 tray (for use with ULXD6 boundary transmitters only)</li>
	<li>Sleek, low profile design integrates into virtually any room aesthetic</li>
	<li>Internal power supply</li>
	<li>Compatible with 3rd party control devices (AMX / Crestron)</li>
</ul>

Compact networked two-bay docking station charges ULXD6 or ULXD8 transmitters and can be rack-mounted or wall-mounted with optional URT3 rack tray.

SBC250

SBC250, 

SBC250-US

The SBC220 2-Bay Networked Charging Station enables docked charging and storage for any combination of two sb900b batteries or ULXD1, QLXD1, AD1 (bodypack) or ULXD2, QLXD2 or AD2 (handheld) wireless transmitters.  When the connected to a network, the charging status of each transmitter can be viewed remotely while the transmitters are in the charger, using Shure Wireless Workbench® Management software.  Up to four SBC220 units can be linked together to share power and network connectivity.

2-Bay Networked Docking Charger            

SBC220 User Guide

SBC220 CAD

<ul>
	<li>Charging for any combination of up to 2 supported batteries, or transmitters using Shure rechargeable batteries</li>
	<li>Connect up to 4 of any combination of SBC220 and SBC240 units with shared power and network connectivity</li>
	<li>LEDs indicate charge status and battery errors</li>
	<li>Storage mode to prepare batteries for long-term storage</li>
	<li>Network-enabled for remote monitoring with Shure Wireless Workbench</li>
	<li>Supplies full charges in three hours, 50% charge in one hour</li>
	<li>Charge status bi-color LEDs for each battery / transmitter</li>
</ul>

Networked Charging Station for docked charging, storage and battery status for any combination of two SB900B batteries or ULXD1, QLXD1, AD1 (bodypack) or ULXD2, QLXD2 or AD2 (handheld) wireless transmitter.  

SBC220

SBC220, 

2-Bay Networked Docking Charger, no power supply

2-Bay Networked Docking Charger, US power supply

SBC220-US

Wireless Workbench Mobile

The ULXD6 Boundary Microphone Transmitter offers a low-profile boundary form factor that is ideal for tabletop use at meetings and events where wired microphones are impractical. Paired with a ULX-D or QLX-D digital receiver, the ULXD6 creates a system with low latency, long transmission range, and high channel count, delivering exceptional performance in large meeting venues where live sound reinforcement is required.

Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.

Wireless Boundary Microphone Transmitter

ULXD6 CAD

ULXD6 ULXD8 User Guide

ULXD6 ULXD8 Architect Specifications

ULX-D Brochure

ULXD6 Spec Sheet

<ul>
	<li>Very low latency makes the ULXD6 ideal for meetings that require live sound reinforcement</li>
	<li>Long transmission range (up to 300 feet/100 meters) for reliable performance in very large meetings at conference and convention centers</li>
	<li>Compatible with the full line of Shure antennas and distribution components, allowing up to 200 ULXD6 boundary microphone transmitters to be used with just one pair of receiving antennas for efficient setup</li>
	<li>Compatible with ULX-D® and QLX-D® digital receivers</li>
	<li>Optional SB900C rechargeable batteries provide up to 12 hours of run-time</li>
	<li>Compatible with standard AA alkaline batteries</li>
	<li>Optional SBC250, SBC450 (4-bay) and SBC850 (8-bay) Networked Charging Stations allow convenient docking and charging when transmitters are not in use</li>
	<li>Configurable Mute button (Toggle, Push-to-Mute, Push-to-Talk, disabled) and Mute LED behavior</li>
	<li>Adjustable RF power, high-pass filter, and power lock settings</li>
</ul>

Boundary

Broadcast/ENG

Commercial Installation

Corporate

Education

Film & TV production

Government

House of Worship

Touring/Rental

The ULXD6 Boundary Microphone Transmitter delivers uncompromising audio quality and RF performance, and AES-256 encryption for secure transmission.

A/V Conferencing

Discussion

QLX-D

Speech

ULXD6

ULXD6, ULXD 6

Conference Room

Corporate Presentation

Auditorium

Lecture Hall

Live Performance

Place of worship

Rehearsal Space

Stadium

Theater Stage

Black Cardioid Boundary Transmitter, Frequency Band Version: G50 (470-534 MHz)

ULXD6/C=-G50

Black Cardioid Boundary Transmitter, Frequency Band Version: H50 (534-598 MHz)

ULXD6/C=-H50

Black Cardioid Boundary Microphone Transmitter, Frequency Band Version: J50A

ULXD6/C=-J50A

Black Cardioid Boundary Transmitter, Frequency Band Version: X52 (902-928 MHz)

ULXD6/C=-X52

Black Omnidirectional Boundary Transmitter, Frequency Band Version: G50 (470-534 MHz)

ULXD6/O=-G50

Black Omnidirectional Boundary Transmitter, Frequency Band Version: H50 (534-598 MHz)

ULXD6/O=-H50

Black Omnidirectional Boundary Microphone Transmitter, Frequency Band Version: J50A

ULXD6/O=-J50A

Black Omnidirectional Boundary Transmitter, Frequency Band Version: X52 (902-928 MHz)

ULXD6/O=-X52

White Boundary Microphone Transmitter, Cardioid

ULXD6W/C=-J50A

ULXD6W/C=-X52

White Boundary Microphone Transmitter, Omnidirectional

ULXD6W/O=-G50

ULXD6W/O=-H50

The ULXD8 Gooseneck Base Transmitter offers a flexible gooseneck mic form factor that is ideal for use at meetings and events where wired microphones are impractical. Paired with a ULX-D or QLX-D digital receiver, the ULXD8 creates a system with low latency, long transmission range, and high channel count, delivering exceptional performance in large meeting venues where live sound reinforcement is required.

Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.

Wireless Gooseneck Base Transmitter

ULXD8 CAD

ULXD8 Spec Sheet

<ul>
	<li>Designed for use with Shure Microflex® MX405, MX410, and MX415 gooseneck microphones, as well as Microflex MX410DF and MX415DF Dualflex gooseneck microphones</li>
	<li>Very low latency makes the ULXD8 ideal for meetings that require live sound reinforcement</li>
	<li>Long transmission range (up to 300 feet/100 meters) for reliable performance in very large meetings at conference and convention centers</li>
	<li>Compatible with the full line of Shure antennas and distribution components, allowing up to 200 ULXD8 gooseneck base transmitters to be used with just one pair of receiving antennas for efficient setup</li>
	<li>Compatible with ULX-D® and QLX-D® digital receivers</li>
	<li>Optional SB900C rechargeable batteries provide up to 12 hours of run-time</li>
	<li>Compatible with standard AA alkaline batteries</li>
	<li>Optional SBC450 (4-bay) and SBC850 (8-bay) Networked Charging Stations allow convenient docking and charging when transmitters are not in use</li>
	<li>Configurable Mute button (Toggle, Push-to-Mute, Push-to-Talk, disabled) and Mute LED behavior</li>
	<li>Adjustable RF power, high-pass filter, and power lock settings</li>
</ul>

Desktop base

The ULXD8 Desktop Base Transmitter delivers uncompromising audio quality and RF performance, and AES-256 encryption for secure transmission.

ULXD8

ULXD8, ULXD 8

White Gooseneck Transmitter, Frequency Band Version: J50A

ULXD8W=-J50A

White Gooseneck Transmitter, Frequency Band Version: X52 (902-928 MHz)

ULXD8W=-X52

Gooseneck Transmitter, Frequency Band Version: G50 (470-534 MHz)

ULXD8=-G50

Gooseneck Transmitter, Frequency Band Version: H50 (534-598 MHz)

ULXD8=-H50

Gooseneck Transmitter, Frequency Band Version: J50A

ULXD8=-J50A

Gooseneck Transmitter, Frequency Band Version: X52 (902-928 MHz)

ULXD8=-X52

Read our blog post <a href="https://www.shure.com/en-US/performance-production/louder/wireless-audio-software-trends-and-shure-updates-wireless-workbench-6-12-shureplus-channels-1-3">Wireless Audio Software Trends and Shure Updates</a> for a rundown on how Wireless Workbench&reg; and ShurePlus&trade; Channels software enhance the capabilities of Shure wireless systems and make remote monitoring easier.

Learn more about the reasons to choose UHF or VHF in our blog post <a href="https://www.shure.com/en-US/performance-production/louder/the-search-for-spectrum-wireless-systems-in-the-vhf-band">The Search for Spectrum: Wireless Systems in the VHF Band</a>.

Digital Wireless Systems

ULX-D User Guide

ULXD4D ULXD4Q User Guide

Broadcast Brochure (TV Studio), English

ULX-D Command Strings

Disqualified Network Switches for Shure Dante Devices

ULX-D Frequency Compatibility Chart

ULX-D Architect Specifications

Broadcast Brochure (TV & Film)

ULX-D CAD

Wireless Systems Comparison Chart

ULXD2/SM58 CAD

Uncompromising Digital Wireless Audio

<ul>
	<li>24-bit/48 kHz digital audio that delivers incredibly clear and accurate reproduction of the source material</li>
	<li>20 Hz &ndash; 20 kHz frequency range with flat response</li>
	<li>Greater than 120 dB dynamic range through the analog outputs</li>
	<li>130 dB dynamic range (typical) using Dante and AES67 digital networked audio</li>
	<li>60 dB of adjustable system gain easily accessible from the receiver front panel</li>
	<li>No transmitter gain adjustments needed: optimised for any input source</li>
	<li>Wide selection of trusted Shure Microphones</li>
</ul>

Extremely Efficient and Reliable RF Performance

<ul>
	<li>Expanded tuning range - ULXD1, ULX2, ULXD4D and ULXD4Q components now available with up to 166 MHz overall tuning range (region dependent)*</li>
	<li>Up to 17 active transmitters in one 6 MHz TV channel (23 on an 8 MHz TV channel)</li>
	<li>High Density mode enables up to 47 active transmitters in one 6 MHz TV channel (63 in one 8 MHz TV channel), with no audio quality degradation</li>
	<li>Rock-solid signal stability with no audio artifacts over the entire 100 meter line-of-sight range using standard supplied &frac12; wave antennas</li>
	<li>Selectable 1, 10, and 20 mW transmitter RF output power (comparable to 5 times the analog RF output power equivalent)</li>
	<li>For ease of use, optimised scanning automatically finds, prioritises, and selects the cleanest frequencies available.</li>
</ul>

*Note that ULXD4, ULXD6 and ULXD8 remain available for operation on legacy frequency bands

Scalable, Intelligent Hardware

<ul>
	<li>Single (half-rack), Dual, and Quad (full-rack) receiver form factors for any size installation</li>
	<li>AES-256 bit encryption equipped for secure wireless transmission</li>
	<li>Ethernet networking allows for streamlined setup across multiple receivers.</li>
	<li>Wireless Workbench 6: The ULX-D is compatible with Wireless Workbench 6 software for advanced frequency coordination, monitoring, and control.</li>
	<li>Comprehensive 3rd party control and monitoring across subnets</li>
	<li>AXT600 Axient&reg; Spectrum Manager compatibility</li>
	<li>Rugged metal housing on both transmitters and receiver</li>
	<li>Dual and Quad receivers additionally feature:
	<ul>
		<li>Expanded tuning range (up to 166 MHz, region dependent)</li>
		<li>RF cascade ports, internal power supply, and dual Ethernet ports</li>
		<li>Dante&trade; digital networked audio over Ethernet&nbsp;</li>
		<li>Bodypack frequency diversity ensures uninterrupted audio for mission-critical applications&nbsp;</li>
		<li>Audio summing routes audio signal to multiple outputs</li>
	</ul>
	</li>
</ul>

Shure Advanced Power Management

<ul>
	<li>SB900 Series rechargeable batteries provides ULX-D transmitters with up to 12 hours of run-time use</li>
	<li>Lithium-Ion chemistry and intelligent Shure battery circuitry for precision metering and zero memory effect saving the equivalent of 1000 disposable batteries</li>
	<li>Transmitters and receivers display remaining battery life in hours and minutes, accurate to within 15 minutes.</li>
	<li>AA backwards compatibility</li>
</ul>

True to the source

Scalable control

Secure sound

Networked, intelligent charging

Why It’s Better

 ULX-D Wireless Family Overview

ULX-D® Digital Wireless is the trusted and reliable partner for secure, scalable and durable performance, campus-wide, providing intelligent solutions for installations and event requirements of all sizes.

Vocals

Presentation

Theater

Conference

Houses of Worship

Field & Event Production

Other Instruments

E-Guitar/Bass

How It Works

Mixed Band Operation for ULX-D Transmitters and Receivers

Shure ULX-D Digital Wireless System: Quad and Dual Receivers

Shure ULX-D Digital Wireless - ULXD6 and ULXD8

How to use Shure ULX-D Networked Charging Stations with WWB6

"The Shure ULX-D Digital Wireless package offers outstanding audio quality and a robust structure"

Broadcast Engineering, 01.08.2012

Quality that’s in the Details

Large conference and convention installations come with unique wireless challenges. ULX-D® Digital Wireless is the trusted and reliable partner for secure, scalable and durable performance, campus-wide. With expanded wide-tuning frequency bands and up to a 40% increase in rechargeable battery run-time, ULX-D Wireless provides intelligent solutions for installations and event requirements of all sizes. For higher channel counts in high-tier applications, the <a href="https://www.shure.com/products/wireless-systems/anx/anx4" target="_blank">ANX4 Scalable Wireless Receiver</a> receives up to 24 channels of Shure ULX-D wireless audio in a single rack space. Choose ANX4 to maximise use of your budget, rack space, and rack weight.

Brass

Choir

Electric Bass / Amp

Electric Guitar / Amp

Harmonica

Woodwinds

ULX-D®

ULX-D®, ULXD®, ULX D®

Combining professional features with simplified setup and operation, QLX-D delivers outstanding wireless functionality for mid-size events and installations in businesses, hotels, and government offices with conferencing spaces; schools, houses of worship, and live performance spaces.

QLX-D reliably operates more channels on-air than any other wireless system in its class. Ethernet connection provides networked channel scanning across multiple receivers and Shure Wireless Workbench&reg; 6 control software compatibility for advanced frequency coordination.&nbsp;

Compatible with the Shure SB900B&nbsp;lithium-ion battery, QLX-D offers rechargeable power options that provide dramatic long-term cost savings and extended transmitter battery life over alkaline batteries, with battery metering that reports remaining runtime in hours and minutes.

Read our blog post <a href="https://www.shure.com/en-US/performance-production/louder/wireless-audio-software-trends-and-shure-updates-wireless-workbench-6-12-shureplus-channels-1-3">Wireless Audio Software Trends and Shure Updates</a> for a rundown on how Wireless Workbench and ShurePlus&trade; Channels software enhance the capabilities of Shure wireless systems and make remote monitoring easier.

Learn more about the reasons to choose UHF or VHF in our blog post <a href="https://www.shure.com/en-US/performance-production/louder/the-search-for-spectrum-wireless-systems-in-the-vhf-band">The Search for Spectrum: Wireless Systems in the VHF Band</a>.

QLX-D Command Strings

QLX-D User Guide

QLX-D CAD

QLX-D Brochure

QLX-D Spec Sheet

QLX-D Architect Specifications

QLX-D Frequency Compatibility Chart

<ul>
	<li>Transparent 24-bit digital audio captures every performance detail</li>
	<li>Over 120 dB of dynamic range eliminates transmitter gain adjustments</li>
	<li>Easy pairing of transmitters and receivers over IR scan and sync</li>
	<li>Automatic channel scan quickly and easily finds a clean frequency</li>
	<li>Networked channel scan configures open frequencies for connected receivers</li>
	<li>Remote monitoring and control from iOS devices via ShurePlus&trade; Channels Mobile App</li>
	<li>AES-256 encryption comes standard for secure wireless transmission</li>
	<li>Elegant and easy-to-use interface with high-contrast LCD menu</li>
	<li>AMX/Crestron control system ready</li>
	<li>Professional-grade, all metal construction</li>
</ul>

Read our blog post <a href="https://www.shure.com/en-US/performance-production/louder/wireless-audio-software-trends-and-shure-updates-wireless-workbench-6-12-shureplus-channels-1-3">Wireless Audio Software Trends and Shure Updates</a> for a rundown on how Wireless Workbench and ShurePlus&trade; Channels software enhance the capabilities of Shure wireless systems and make remote monitoring easier.

Persistent power

Why It's Better

Shure QLX-D Digital Wireless System

More complex venues demand greater capability and flexibility.  QLX-D® Digital Wireless Systems are more than ready for the challenge.

Playlist: Shure QLX-D Digital Wireless System

QLX-D Digital Wireless Systems: QLXD1 Digital Wireless Bodypack

QLX-D Digital Wireless Systems: QLXD2 Digital Wireless Handheld

QLX-D Digital Wireless Systems: Spectrum Efficiency

Mid-size venues demand more wireless capability. QLX-D® Digital Wireless is more than ready for the challenge. The robust RF performance lets you step up to an all-around higher class of audio, while protecting the signal at every level. It’s an affordable upgrade and a smart investment in your sound. 

QLX-D®

QLX-D®, QLXD®, QLX D®

Rechargeable Lithium-Ion Battery

SB900A User Guide

SB900 CAD

Rechargeable lithium-ion battery makes powering Shure wireless systems easy.

Designed for Shure’s Axient Digital, ULX-D, QLX-D, and PSM wireless systems, the SB900C Rechargeable Lithium-Ion Battery delivers enhanced reliability over disposable batteries, with higher capacity for extended usage times. With more charge cycles and a long lifespan that can replace over 1,000 AA batteries, the SB900C offers a sustainable power solution without compromising performance.

SB900C

SB900C, 

SB900C&nbsp;Rechargeable Lithium-Ion Battery

Contact Support

Filter by product category, then series

Find a Dealer Near You

Please Choose a Country to See Available Dealers

Filter by dealer type

- Shure USA

Thank you! We have received your submission and will be in touch.

Cable Length

Colors

Connector

Select a Combination

Windscreen

Frequency Band

Find my frequency

Furnished Cables

Furnished Capsules

Studio Kit

On Off Switch

Package Of

Shape

Stand Color

Stand Type

Release Title

Viewing this video may result in cookies being placed by the vendor of the video platform to which you will be directed. Given the refusal of the deposit of cookies that you have expressed, in order to respect your choice, we have blocked the playback of this video. If you want to continue and play the video, you must give us your consent by clicking on the button below.

We want you to feel confident in your purchase. If something isn’t right, you can return almost any product within 30-days of delivery. Returns and exchanges include free return shipping when the process is followed.

We offer fast, free shipping on all orders within the continental US. Most in-stock items ship quickly from our US warehouses, so you can get your gear without added costs.

Get support directly from Shure product specialists who know the gear inside and out. Whether you need help choosing the right product or setting it up after purchase, our experts are here to help.

SBC450

Related Products

Reviews