Software & Firmware Archiv

Improvements

• Bug fixes

Known Issue

• When an AXT400 J is set to one of the newly supported UHF-R bands (e.g. G1HK, H4HK, J5HK, L3HK), downgrading the AXT400 J unit from 1.17.10 to 1.15.3 may result in abnormal frequency indication (e.g. 0.000 MHz) as well as a change in the RF band.

Notes

• To operate Axient 2.0.27 devices with other Shure systems and software, see the following list of minimum versions:
• UR4 UHF-R receiver 1.171
• UR3 Plug-on Transmitter 1.0.0.16
• UR5 Portable Diversity Receiver 1.0.0.13
• ULX-D ULXD4X Receivers 2.1.16
• QLX-D QLXD4 Receiver 2.1.5
• PSM1000 P10T Transmitter 1.4.2
• SBRC Shure Battery Rack Charger 1.0.1
• Shure Update Utility 2.4.1
• ShurePlus Channels 1.4
• Wireless Workbench 6.12.2

Improvements

• Bug fixes

Notes

• Transmitters to be used with receivers must be updated via IR. After the receiver is updated, go to the receiver menu: Tx > IRPresets > FWUpdate. Align the infrared ports with the transmitter and press Download.
• To operate Axient 2.0.27 devices with other Shure systems and software, see the following list of minimum versions:
  • UR4 UHF-R receiver 1.171
  • UR3 Plug-on Transmitter 1.0.0.16
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULX-D ULXD4X Receivers 2.1.16
  • QLX-D QLXD4 Receiver 2.1.5
  • PSM1000 P10T Transmitter 1.4.2
  • SBRC Shure Battery Rack Charger 1.0.1
  • Shure Update Utility 2.4.1
  • ShurePlus Channels 1.4
  • Wireless Workbench 6.12.2

Improvements

• Bug fixes

Notes

• Transmitters to be used with receivers must be updated via IR. After the receiver is updated, go to the receiver menu: Tx > IRPresets > FWUpdate. Align the infrared ports with the transmitter and press Download.
• To operate Axient 2.0.27 devices with other Shure systems and software, see the following list of minimum versions:
  • UR4 UHF-R receiver 1.171
  • UR3 Plug-on Transmitter 1.0.0.16
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULX-D ULXD4X Receivers 2.1.16
  • QLX-D QLXD4 Receiver 2.1.5
  • PSM1000 P10T Transmitter 1.4.2
  • SBRC Shure Battery Rack Charger 1.0.1
  • Shure Update Utility 2.4.1
  • ShurePlus Channels 1.4
  • Wireless Workbench 6.12.2

Important

• This firmware release can be used to upgrade units in a DDS 5900 or a DCS 6000 systems using CU 5905, CU 6105, CU 6110 or DIS CCU Central Units.
• The CU 6000, CU 6005, CU 6010 and CU 6011 Central Units are not supported in this release.
• The DIS FUU Firmware Upgrade Utility, which is part of this firmware release, must be used when upgrading

New Features

• CU/CUU: Added multi-language support for WEB-UI and Name Sign.
• CU 5905/CCU(5900 mode) - Support for TPCI mic_attenuation command

Improvements

• CU/CCU - Ensures channel selectors get language abbreviation on/off setting repeatedly.
• SW6000, CU – Fixed the clearing request list so that the individual request Off comes before Clear Request List
• CU/CCU - Fixed CU response with Mic on, when sending microphone on message to an Interpreter that is not connected to the CU
• CU/CCU - CU is no longer resetting if interpreter settings are reset while the interpreter microphone is active
• CU/CCU - WEB-UI "View Open Source Licenses" now shows open source licenses instead of a "404 Not Found" html page
• CS6340F - After CU starts up, channel OLED on CS6340F now correctly shows channel language abbreviation instead of channel number
• IS6132 – There is no longer an audible difference in sound level on CU audio output, when comparing floor sound and interpreted audio
• SW6000, Interpreter, CU61xx, - Interpreter status is now correctly marked as "Lost" if unregistered rather than "Not Lost" and leading to wrong status in SW6000
• DC59xx – Fixed the "All delegate off" LED so that it is not ON when the button is pressed on DC59xx chairman units
• CU/CCU – In operation mode FIFO, the request list is now restored to speak list when selecting "All del off" on the WEB-UI

Notes

• DCS 6000 and SW6000 compatibility chart
• DCS Firmware compatibility chart

Important

• This version applies to AD1 and AD2 transmitters

Improvements

• Adds support for transmitter SKUs sold in Brazil
• Improved user interface

Notes

• AD1/2 version 1.0.21 is compatible with AD1/2 devices on version 1.0.21 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate AD1/2 version 1.0.21 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 Transmitters 1.0.21
  • Axient Digital AD4D/Q Receivers 1.0.21
  • Axient AXT600 Spectrum Manager 2.0.27
  • SBRC Shure Battery Rack Charger 1.0.1
  • Shure Update Utility 2.4.1
  • ShurePlus Channels 1.4
  • Wireless Workbench 6.12.2

New Feature

• Initial firmware for the P300 IntelliMix Audio Conferencing Processor

Notes

• To operate P300-IMX version 2.1.6 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate P300-IMX version 2.1.6 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI22 2.0.11
  • ANIUSB-MATRIX 2.0.11
  • ANI4IN 2.0.7
  • ANI4OUT 2.0.8
  • MXA310 2.0.7
  • MXA910 2.0.16
  • Microflex Wireless 5.1.23
  • Shure Update Utility 2.4.1
  • Shure Web Device Discovery 1.1

Improvements

• Support for transmitter SKUs sold in Brazil
• Support for DC modules

Notes

• AD4Q version 1.0.21 is compatible with AD4Q devices on version 1.0.21 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate AD4Q version 1.0.21 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 Transmitters 1.0.21
  • Axient Digital AD4D Receivers 1.0.21
  • Axient AXT600 Spectrum Manager 2.0.27
  • SBRC Shure Battery Rack Charger 1.0.1
  • Shure Update Utility 2.4.1
  • ShurePlus Channels 1.4
  • Wireless Workbench 6.12.2

Improvements

• Support for transmitter SKUs sold in Brazil
• Support for DC modules

Notes

• AD4D version 1.0.21 is compatible with AD4D devices on version 1.0.21 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate AD4D version 1.0.21 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 Transmitters 1.0.21
  • Axient Digital AD4Q Receivers 1.0.21
  • Axient AXT600 Spectrum Manager 2.0.27
  • SBRC Shure Battery Rack Charger 1.0.1
  • Shure Update Utility 2.4.1
  • ShurePlus Channels 1.4
  • Wireless Workbench 6.12.2

Note

Use this version of Shure Update Utility to update firmware on PSM1000 systems running firmware 1.1.0 or earlier.

Important

To update Shure Update Utility (version 2.4 or earlier) to version 2.4.1, download and re-install from Shure.com/SUU and not through Help > Check for Shure Update Utility updates.

Improvements

• Returned support of Shure Update Utility for 32-bit Windows operating systems. To update Shure Update Utility (versions 2.2.2 or earlier) on a 32-bit Windows system, download version 2.4.1 for 32-bit systems to re-install the software.
• Added support for PSM1000 G62

Known Issues

• 32-Bit Windows
  • Selecting "Help" > "Check for Shure Update Utility updates" will open Shure.com, which offers the latest version of Shure Update Utility to download. Shure Update Utility version 2.4.1 will not automatically detect new versions.
  • To update Shure Update Utility (versions 2.2.2 or earlier) on a 32-bit Windows system, download version 2.4.1 for 32-bit systems to re-install the software. Older versions of Shure Update Utility will not detect new updates of Shure Update Utility that support 32-bit systems.
  • Shure Update Utility version 2.4.1 for 32-bit systems is compatible with Wireless Workbench 6 version 6.12 or earlier.
• Attempts to download ULXD6/8 transmitter firmware to a ULX-D or QLX-D receiver that is not at the minimum firmware version will fail. To update firmware for ULXD6/8 transmitters with ULX-D or QLX-D receivers:
  1. Update receivers to the following minimum versions:
     • ULXD4, ULXD4D, ULXD4Q Receivers 2.1.16
     • QLXD4 Receivers 2.1.5
  2. Using Shure Update Utility, download ULXD6/8 transmitter firmware to the receivers.
  3. Using the FW Update menu on a receiver, update transmitters.
• Microflex Wireless devices running version 1.X firmware must first be updated to version 2.0.5 before being updated to version 3.X or later.

Notes

• Installing Shure Update Utility on Windows will also prompt the installation of a USB driver, which must be installed to support updating USB devices, like GLX-D.
• USB 2.0 Devices
  • KSE1500, SHA900 and GLX-D (USB 2.0 connected devices) must be updated one at a time.
  • USB hubs are not recommended when updating USB 2.0 connected devices. Always connect these devices directly to a USB terminal of the computer running Shure Update Utility.
• Shure Update Utility 2.4.1 for 64-bit systems is compatible with Wireless Workbench 6.12.2 or later.
• Shure Update Utility 2.4.1 for 32-bit systems is compatible with Wireless Workbench 6.12 or earlier.

Recommendation

Update all MXA910 devices in a configuration to the same firmware version.

Improvements

• Fixed an issue where the low-shelf filter fails after importing a preset file.

Known Issue

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• MXA910: User Guide | Command Strings
• MXA910 version 2.0.16 is compatible with MXA910 devices running version 2.0.16 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate MXA910 version 2.0.16 with Dante™ Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate MXA910 version 2.0.16 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI4IN 2.0.7
  • ANI4OUT 2.0.8
  • MXA310 2.0.8
  • Microflex Wireless 5.1.23
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.3
  • Shure Web Device Discovery 1.1
  • Designer 3.0