Break through with wireless scalability.

WWB6

WWB6 Wireless Workbench Software

Een rijke interface versterkt zorgt voor het beheren van alle details van een show via een netwerk. Van een planning vooraf tot live performance monitoring.

Hoe het werkt

Wireless Workbench 6 is software waarmee elk onderdeel van het systeem op afstand kan worden gemonitord en beheerd – tijdens het gebruik. Frequentieberekening en ‑analyse voor de ondersteunde apparatuur maakt het mogelijk om de hele show aan te sturen vanuit één computerprogramma. Met de Timeline-functie is het zelfs mogelijk om RF-data bij te houden en later na te kijken. Betere controle bij elk optreden met maximale draadloze vrijheid.

Waarom het beter is

Simpel beheer

Gebruikers kunnen instellingen opslaan en later makkelijk opnieuw gebruiken, voor een snelle configuratie van apparatuur.

Robuuste coördinatie

Frequenties zijn zelden consistent. Met Wireless Workbench coördineer je je frequenties in tijd en ruimte.

Organisatiebreed netwerk

Je maakt op afstand verbinding met apparatuur in verschillende subnetwerken. Door middel van een toegangscontrole zorg je ervoor dat alleen bevoegde gebruikers je netwerk kunnen gebruiken.

Kwaliteit tot in de details

  • Gratis download
  • Compatibel met Windows 7, 8 en 10 en Mac OS X El Capitan, Sierra en High Sierra
  • Apparaatmeldingen voor frequentie-, audio- en batterijparameters
  • Mogelijkheid om rapporten te maken m.b.t. aanwezige apparatuur, coördinatie en netwerk
  • Coördinatie van bepaalde apparatuur van andere merken

Download WWB6

Versie 6.13.2 | Bekijk alle updates

Downloaden voor Mac

Download

Downloaden voor Windows 64-bit

Download

Videos

Compatibele producten

SBC250

SBC250 2-Bay Networked Charging Station

Compact netwerk-dockingstation met twee compartimenten laadt ULXD6- of ULXD8-zenders op en kan in een rack of aan de muur gemonteerd worden met optionele de URT3 rack-houder.

ULXD4Q

ULXD4Q Digitale Quad-Channel Draadloze Ontvanger

De ULXD4Q is een quad-channel draadloze netwerkontvanger in volledig rack formaat voor gebruik met ULX-D systemen.

QLXD4

QLXD4 Digitale Draadloze Ontvanger

De QLXD4 is de ontvanger van het QLX-D digitale draadloze systeem.

ULXD4

ULXD4 Digitale Draadloze Ontvanger

De ULXD4 is een draadloze netwerkontvanger in half rack formaat, voor gebruik met ULX-D systemen.

ULXD4D

ULXD4D Digitale Dual-Channel Draadloze Ontvanger

De ULXD4D is een dual-channel draadloze netwerkontvanger in volledig rack formaat voor gebruik met ULX-D systemen.

Stopgezet

UR4S+

UR4S+ Draadloze Ontvanger, cascade-versie

Deze single-channel uitvoering maakt deel uit van de premium UHF-R serie voor hoogwaardige draadloze verbindingen en is leverbaar met cascade-aansluitingen.

Stopgezet

UR4D+

UR4D+ Dual Draadloze Ontvanger, cascade-versie

Maakt deel uit van de premium UHF-R serie voor hoogwaardige draadloze verbindingen, en is leverbaar in dual-channel uitvoering en met cascade-aansluitingen.

P10T

P10T draadloze zender

De tweekanaals radiozender P10T op fullrack-formaat van Shure combineert de nieuwste techniek met functies van tourneekwaliteit voor professionele monitortoepassingen van elke omvang waarbij fouten niet geoorloofd zijn.

Stopgezet

UR1M

UR1M microbodypack-zender

Lichtgewicht en discrete UHF-R bodypack-zender met TA4M of Lemo-3-connector opties.

SBRC

SBRC Oplader voor rackmontage

De SBRC is een compacte oplader voor montage in een rack, die acht oplaadbare accu's oplaadt in één rackplaats.

AD610

AD610 Diversity ShowLink® Access Point

De AD610 biedt een draadloze ShowLink-verbinding tussen alle gekoppelde zenders en ontvangers.

AD4D

AD4D Tweekanaals Digitale Draadloze Ontvanger

Verenigbaar met alle AD series en ADX series transmitters.

AD4Q

AD4Q Vierkanaals Digitale Draadloze Ontvanger

Verenigbaar met alle AD series en ADX series transmitters.

ULXD6

ULXD6 Draadloze Grensvlakmicrofoonzender

Draadloze grensvlakmicrofoonzender die compatibel is met de ULX-D Digitale Draadloze Systemen.

ULXD1

ULXD1 Digitale Draaloze Bodypack

Draadloze bodypack compatibel met het ULX-D digitale draadloze systeem.

Support

Klantenondersteuning

Service & Reparaties

Shure contact en service aanvraagformulier

Service & Reparaties

Contact

Neem contact op met de Shure-klantenservice via het webformulier of de telefoon.

Contact

Hulpmiddelen

Shure Tech Portal

Complete productdocumentaties, technische ondersteuningsmaterialen, software en firmware en andere tools en bronnen voor alle Shure-producten op één plek.

Aanmelden launch

Documentation

Release Notes

Version 6.13.2

New Device and Frequency Band Support

  • Added support for new Shure frequency bands
    • Axient Digital G63 | 487.125 – 636.875 MHz
    • Axient Digital P55 | 694.500 – 805.700 MHz
    • PSM900 Q12 | 748.300 – 757.700 MHz
    • PSM1000 M19 | 694.500 – 702.700 MHz
    • PSM1000 Q12 | 748.300 – 757.700 MHz
    • QLX-D M19 | 694.500 – 702.700 MHz
    • QLX-D Q12 | 748.300 – 757.700 MHz
    • ULX-D M19 | 694.500 – 702.700 MHz
    • ULX-D Q12 | 748.300 – 757.700 MHz
  • Updated power levels for Axient Digital Z16 frequency band

Stability 

  • WWB no longer crashes when saving a Timeline file in one scenario.
  • WWB no longer crashes when an offline device comes back online while a modal child dialog of its property panel is on top.
  • WWB no longer crashes when the “channels operating in FD-C mode” warning dialog is present in one scenario.
  • WWB no longer crashes when searching for TV channel exclusions in a radius of zero miles.
  • WWB no longer crashes when enabling Monitor Only Mode in one scenario.

Frequency Coordination

  • Improved the spectrum scanning workflow and user interface in the Frequency Coordination tab and the Frequency Plot tool.
    • Simplified the scan settings dialog.
    • View and select scanning devices in the scan sources table.
    • View completed scans and scans in progress in the scan data table.
    • Show or hide scan data, change its color, and save scan data as separate files using options and context menus in the scan data table.
  • Added spectrum plot overlays in the Frequency Coordination spectrum plot and the Frequency Plot tool.
    • Frequency band overlays are displayed when frequencies are added to the CWS; frequency bands for equipment in the inventory is displayed in the Frequency Plot tool by default.
    • Intermodulation (IMD) product overlays for all frequencies in the coordination workspace (CWS) can be toggled from the right sidebar in the CWS.
      • Ctrl-click and drag frequency markers (command-click on Mac) to see IMDs move in real-time.
    • Right-click on a frequency marker to view equipment profile spacing.
    • Right-click on a frequency marker to view the effective bandwidth filter.
  • The online US TV channel database is now powered by the Shure Wireless Frequency Finder, allowing you to see the most recent updates to TV transmitter data managed by the FCC.
  • Updated user group parameters for the following countries:
    • Australia – Outdoors: changed the starting frequency from 520.000 MHz to 520.150 MHz
    • Belgium: added all new groups and ranges by province
  • Updated the offline TV channel database for the following countries:
    • Belgium (removed in favor of user groups)
    • Denmark
    • Finland
    • France
    • U.S.
  • Improved the “show in table” context menu option for frequency markers so that the coordination workspace will switch zones if the frequency is not in the current zone.
  • Updated tuning bandwidth of Telex BRT-1 Base Station C-band from 554.100 – 571.900 MHz to 554.000 – 572.00 MHz.
  • Updated the step size of the Radio Active Designs UV-1G Belt Pack from 5 kHz to 25 kHz.
  • Fixed an issue where the x-axis of the spectrum plot in the Frequency Coordination tab would disappear in one scenario.
  • Fixed an issue where the auto-assign and unassign buttons in the assign and deploy dialog were not applying to all zones.
  • Fixed an issue where backup frequencies in the coordinated frequencies list (CFL) were being imported into the coordination workspace using “all frequencies in inventory” option.
  • Fixed an issue where changing parameters of a detected scan exclusion did not change the source to “user-defined”.
  • Fixed an issue in the TV channels dialog where the unit of distance defaulted to miles even when set to kilometers.
  • Discontinued the 900 MHz ISM Site Survey tool.

Inventory

  • Fixed an issue where WWB metadata (i.e. RF zone, channel color, tag, and inclusion group) were not preserved when merging devices in the inventory.
  • Fixed an issue where a settings conflict would be triggered for an AXT400 receiver when it was power-cycled while in FD-BP mode and receiver-lock was set to Rx1 or Rx2.

Monitoring

  • Added a new ShowLink Access Point widget for AD610 and AXT610, allowing you to see all connected devices, their device type, device ID, RF transmission status, ShowLink quality level, and battery charge.
  • Added network status indications for Axient Digital receivers assigned to Dante Domains.
  • Fixed an issue where Axient Digital transmitter hardware version was not displayed in the transmitters tab of AD4* properties panels.
  • Fixed an issue where channel strip sort order was not retained in saved show files.
  • Fixed an issue where charger storage mode in properties panels was blank when the device went offline.
  • Fixed incorrect text in event logs for AXT400 and ULX-D while clearing interference alerts by changing frequency.
  • Fixed incorrect text in event logs for ShowLink-enabled transmitters that change frequency during network reconnection.
  • Fixed an issue where Mini Timeline view mode would not update when multiple views are present.
  • Fixed an issue where Mini Timelines would overlap in one scenario.
  • Fixed an issue where OS notifications for alerts were being displayed when an alert was cleared or made inactive.
  • Fixed an issue where there was stale battery information and firmware version when SBC240 chargers were ganged together.
  • Fixed an issue where the temperature value for ganged chargers was not being updated in the properties panel.
  • Fixed an issue where changing F2 of an offline AD4* in FD-C mode reported a change on F1 and F2.
  • Fixed an issue where having several monitor views would cause the right sidebars of all tabs to be pushed off the screen.

Timeline

  • Fixed an issue where channels in Timeline would overlap in one scenario.
  • Fixed an issue where the system event for FD Mode was being duplicated.
  • Fixed an issue where the system event marker for FD Override was not shown in one scenario.
  • Fixed an issue where the time axis values would overlap with one another after zooming in and then zooming out.
  • Fixed an issue where enabling frequency diversity mode from the properties panel of either the second or fourth channel of a multi-channel receiver would deselect that channel in Timeline.
  • Fixed an issue where Timeline would stop recording and present an “invalid path” message when the file reached 2 GB.
  • Fixed an issue where the hint text in the search bar was not being cleared from the channel chooser.

Networking

  • Fixed an issue where deleting remote devices might not remove some devices in the inventory.
  • Fixed an issue where the save and apply buttons were disabled in the Remote Devices tab of the preferences when attempting to add a range of IP addresses where at least one of those IP addresses was already in the list.

File Management

  • Application crash logs are now stored on your local machine. Files older than 30 days are automatically removed. You can elect to send an anonymized and pseudonymized copy of these crash logs to Shure by default, or send them manually when you see fit.
  • Made improvements to the warning dialog text when custom equipment profile names conflict with stock equipment profile names.
  • Fixed an issue where saving a show file with automatically calculated backup frequencies would create unused RF zones when the show file was re-opened.
  • Fixed an issue where the color of the default RF zone was not being retained in show files.
  • Fixed an issue where the ShowLInk transmitter control page of a channel strip was not saved in show files.
  • Fixed an issue where certain ShowLink transmitter properties were not saved in show files.

General

  • Removed the Updates tab from the preferences dialog, and the in-app update functionality from the application. Please continue downloading new versions from the WWB product page on Shure.com.
  • Fixed an issue in the Frequency Band Conversion Tool where devices previously set to “do not convert” were not able to be converted in one scenario.

Notes

  • When using the in-app update function, in order to successfully install Wireless Workbench, you must run it as an administrator. Consult your IT department if you have questions.
  • Opening show files created with older versions of Wireless Workbench may result in the Settings Conflicts dialog opening once the file has loaded. This is due to newly supported hardware parameters that have been introduced with updated firmware versions. To maintain all settings from the show file, select "Keep all settings from: Wireless Workbench."
  • Alerts logged when devices first come online may list device parameters and their values as they are being discovered even though the parameter values themselves have not changed.

Known Issues

  • When using multiple spectrum managers, if they have the same device ID, any combo box where you specify a link between receiver and spectrum managers will not list all available spectrum managers. To resolve this, provide a unique device ID for all spectrum managers.
  • ULX-D receivers running firmware version 2.0.28 or earlier may trigger a Settings Conflict when rediscovered after updating their firmware to version 2.1 or later. There is no issue with the device—there was simply a new property added in version 2.1. To dismiss the alert, resolve the Settings Conflict by selecting the properties you wish to keep.
  • Timeline System Events displayed for Active Transmitter Online for ULXD6/8 transmitters do not always include Transmitter Device ID in the event description.
  • SLX and ULX frequencies in Master List mode cannot be manually entered in the Coordination Workspace. They can, however, be coordinated and analyzed.

Vergelijkbare producten

ShurePlus™ Channels

ShurePlus Channels App voor mobiele Apple-apparaten

De handige en flexibele ShurePlus™ Channels-app bespaart geluidstechnici veel tijd met real-time monitoring en besturing op afstand van bepaalde draadloze systemen van Shure. ShurePlus Channels is geschikt voor mobiele Apple-apparaten met iOS 8 of hoger.

SUU

Shure Update Utility

De Shure Update Utility stroomlijnt het updaten van de firmware en de software van compatibele Shure-producten.