ソフトウェア/ファームウェア アーカイブ

Release notes cover the following models:

• MXC605
• MXC605-F
• MXC615
• MXC620/620-F
• MXC630/630-F
• MXC640
• MXCIC
• MXCMIU
• MXCSIGN
• DIS-CCU
• DC5900F
• DC5980P

Important

• This firmware release can be used to update Microflex Complete (MXC) or DCS 6000 systems using DIS-CCU Central Unit and to update DC5900F and DC5980P to register and work in an MXC system.
• Systems using CU 5905, CU 6000, CU 6005, CU 6010, CU 6011, CU 6105, or CU 6110 Central Units are not supported in this release.
• The Firmware Update Utility (FUU) included in this release, is required to make the update.

New Features

• DIS-CCU  
  • MXC605 support – as delegate, chairman, ambient and interpreter
  • MXC605-F support – as delegate, chairman and ambient
  • DC5980P support for use in MXC system – as delegate, chairman and interpreter
    • Meeting role (Delegate/Chairman) is set in DIS-CCU  -  change "on-the-fly"
    • Left button is configured in DIS-CCU
      • Delegate: No function or Mute
      • Chairman: No function or All delegates off
  • DC5900F support for use in MXC system – as delegate and chairman
    • Meeting role (Delegate/Chairman) is set in DIS-CCU  -  change "on-the-fly"
  • Auto registration/selection of MXC VOX mode vs 6000 VOX mode. If 5900/6000 units are present, voice activation mode will be 6000 VOX mode, otherwise it will be MXC VOX mode
  • Comply with California’s IoT Law
  • Global and UI language options expanded with Catalan and Basque
  • System change option between 5900 and 6000 mode removed
  • FL6000 license included as default
• MXC Conference Units
  • Support for Speak button “Delegate speak button lock”
  • Support for Speak button "Press and hold"
  • UI language options expanded with Catalan and Basque
• MXCIC
  • Option to show agenda
  • Option to enable/disable the audio beeps for hearing protection
  • Mic LED button behavior to indicate selected outgoing channels status
• TCPI
  • 'mic_mute_all’ command included

Bug Fixes

• MXC Conference units
  • MXC VOX mode: Pressing Mute should prevent gating on own MIC
• MXC630-F 
  • Wrong indication in 'Abstain' button
• MXC640
  • Fixed LED control when a dual unit is both in speak list and request list
  • Present/seats value = 2000 was cut off on right side, and only 200 was shown
  • Home screen and FW upgrade screen images are changed
• MXCMIU
  • Individual microphone Level was not persistent across unit and CCU reset
• MXCIC 
  • Long participant names were not updating on Speakers page
• TPCI 
  • Individual vote state was missing a space char before button_id
  • Mic_speech_time_alarm repeats multiple times for alarm for each unit
  • Mix-minus state info was not correct
• Legacy 6000 units
  • VOX settings not kept after reboot

Known Issues

• MXC640
  • Manually entered voting results are not shown if a normal voting session has not been started first
  • The agenda subject name for a manually entered result may be wrong
  • It is not possible to use an MXC640 configured as dual delegate with SW6000 if the use of NFC cards is enabled

Notes

• MXC and DCS 6000 firmware files are packaged together in the same release file.
• To operate MXC devices using version 9.0 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SW6000 v9.0
  • Shure NFC Programming App 1.0.3

新しいデバイスおよび周波数バンドのサポート

• AXT Digital AD3プラグオン送信機のモニタリング情報およびIRプリセットを新たにサポート
• SLX-Dワイヤレスマイクロホンシステムのオフラインコーディネーションを新たにサポート

インベントリー

• オーディオレベル値が項目プロパティーサイドバーに順番に表示されない問題を修正

注記

• アプリケーション内のアップデート機能を使用してWireless Workbenchを正常にインストールするには「管理者として実行」する必要があります。コンピューターの管理者権限について不明な点がある場合はIT担当者に相談してください。
• 以前のバージョンのWireless Workbenchで作成したショーファイルを開くと、ファイルを読み込んだ後に「Settings Conflict」ダイアログが開く場合があります。これは、アップデートされたファームウェアバージョンにより新たにサポートされたハードウェアパラメーターに起因するものです。ショーファイルのすべての設定を維持するには「Wireless Workbenchからの全設定を維持する」を選択します。
• デバイスを初めて接続したときに記録される警告に、パラメーターの値自体が変更されていなくてもデバイスパラメーターとその値が検出されたかのように表示されることがあります。

既知の問題点

• ファームウェアバージョン2.0.28以前で動作するULX-D受信機は、ファームウェアをバージョン2.1以降にアップデートした後に再検出すると「Settings Conflict」ダイアログが開くことがあります。これはデバイスの問題ではなく、バージョン2.1で新しいプロパティが追加されたことによるものです。警告を解消するには、維持したいプロパティを選択することによって設定コンフリクトを解決します。
• ULXD6/8送信機が「Active Transmitter Online」のときに表示されるタイムライン・システム・イベントは、イベントの説明に送信機デバイスID（Transmitter Device ID）が表示されません。
• 「マスターリスト」モードのSLXおよびULXの周波数は、コーディネーションワークスペースに手作業で入力することができません。ただし、コーディネーションと分析は可能です。

Improvements

• DCS-LAN Tool is now a stand-alone application
• Users can now import diagnostic file from DIS-CCU FW8.1 or later, and visualize the DCS-LAN network topology
• Supports newer MXC system components (MXCMIU)

Bug Fixes

• Improved calculations for power consumption using ‘worst case scenarios’ where components utilize the most possible power
• Utilizes ‘rules’ for JB6104 and connected components (only one discussion unit per port, or up to 4 channel selectors)
• GUI improvements

Notes

• Users are not yet able to design cable loop topology
• Diagnostic files with legacy components can yield incorrect topology reports
• MXCMIU will use its highest power consuming component (MXCMIU-FL) for power estimates

Improvements

• Bug fixes

Improvements

• Bug fixes

New Features/Improvements

• Individual Voting
  • Voting results for the individual participants in a non-secret vote are shown in the Chairman GUI, Display GUI, and through TPCI. (Note: see Secret Vote known issue below)
  • When the vote is completed, the results for a non-secret vote may be exported as a CSV or PDF file, organized by chronological (in the order the votes were cast), alphabetical (based on participant first name), or vote value group (e.g. YES votes listed together, etc.)
  • Individual Delegates may be excluded from participating in a vote by the Chairman through the Chairman GUI.  Excluded participants are also indicated on Exported voting reports.
• Additional countries added to system country list
  • Morocco & Egypt have been added to country list, allowing the MXCW system to legally and properly operate respectively in those countries.
• Additional Languages
  • Catalan and Basque languages added
  • Polish is available in the MXCWAPT only, not the MXCW640
• Dante Input Gain
  • Dante Input gain structure corrected to improve mixing external audio sources to system audio via Dante inputs.
• Device List in GUI updated
  • To more easily view devices that are online, offline, and connected when operating larger systems, separate selectable lists have been created.

Known Issues

MXCWAPT

• MXCWAPT FW update with SUU may result in SUU reporting a false update failure, when update was actually successful.  If this occurs, verify FW on APT via GUI or LCD.
• In rare cases during repetitive restart stress testing, DANTE may not start up after APT reboot.  Resolve by power cycling APT.
• In rare cases during repetitive stress testing of changing IP mode from auto to static and back, APT may fail to reconnect all WDU’s.

MXCWAPT Component GUI

• When using 2, 3, or 5 buttons Secret Vote, the Chairman GUI will incorrectly show the individual voting results after the vote has stopped.  The exported results will also incorrectly show the individual voting results.
• When running Windows-Version:1809, cannot access APT CGUI when opened via DNS Name applied directly to the browser search bar or with Shure Discovery Application short cut. Opening APT CGUI via IP address works as designed.
• APT help topics are not translated in Thai, Turkish, Lithuanian, Polish, Catalan and Basque languages.
• When performing Identify on a range, if that identify includes only the second side of a Dual Delegate unit, the unit does not light up. If the range includes the first side or both, the unit operates as expected.

MXCW640

• MXCW640 Left/Right buttons incorrect LED indication when using FIFO conference mode with Dual-Delegate or while identifying units while in Request List.
• In very rare occasions, MXCW640 touch screen will not respond to screen touch.  Resolved by power cycling unit.
• Some MXCW640 text is cut off for some languages.
• MXCW640 loudspeakers do not unmute when Ambient Mode is enabled but no Ambient Units are registered.  Resolve by disabling Ambient Mode when no Ambient units are planned to be used.
• If a unit is set as a Remote Caller and the number of microphone slots reserved for active speakers is set to 8 in the component GUI, the Remote Caller unit does not display an error message.
• If a unit is set as a Remote Caller selecting an interpretation channel does not have any effect in the audio being routed to the remote caller, only floor is routed to the remote caller.

TPCI

• Once MXCW640s are set to Ambient Role, unit will no longer respond to TPCI strings that are indexed based off of seat number.
• Once MXCW640s are set to Ambient Role, and rebooted, unit will no longer send TPCI strings when changing role to other than Ambient (Chairman, Delegate, Interpreter etc). Resolved by power cycling the unit, while not in Ambient role.
• Rare TPCI errors reporting a single MXCW640’s when transitioning roles from Ambient. Resolved by restarting unit.

SOFTWARE

• Shure Discovery Application missing MXCWAPT AES67 indication.

MXCWNCS

• The MXCWNCS does not have support for Catalan, Polish and Basque

Notes

• User Guide
• To use MXCW version 4.0.9 with other Shure software, reference the following list of minimum versions:
  • Shure Update Utility 2.4.8
  • Shure Web Device Discovery 1.2.9
  • Shure NFC Programming Application 1.0.3

New Features/Improvements

• Individual Voting
  • Voting results for the individual participants in a non-secret vote are shown in the Chairman GUI, Display GUI, and through TPCI. (Note: see Secret Vote known issue below)
  • When the vote is completed, the results for a non-secret vote may be exported as a CSV or PDF file, organized by chronological (in the order the votes were cast), alphabetical (based on participant first name), or vote value group (e.g. YES votes listed together, etc.)
  • Individual Delegates may be excluded from participating in a vote by the Chairman through the Chairman GUI.  Excluded participants are also indicated on Exported voting reports.
• Additional countries added to system country list
  • Morocco & Egypt have been added to country list, allowing the MXCW system to legally and properly operate respectively in those countries.
• Additional Languages
  • Catalan and Basque languages added
  • Polish is available in the MXCWAPT only, not the MXCW640
• Dante Input Gain
  • Dante Input gain structure corrected to improve mixing external audio sources to system audio via Dante inputs.
• Device List in GUI updated
  • To more easily view devices that are online, offline, and connected when operating larger systems, separate selectable lists have been created.

Known Issues

MXCWAPT

• MXCWAPT FW update with SUU may result in SUU reporting a false update failure, when update was actually successful.  If this occurs, verify FW on APT via GUI or LCD.
• In rare cases during repetitive restart stress testing, DANTE may not start up after APT reboot.  Resolve by power cycling APT.
• In rare cases during repetitive stress testing of changing IP mode from auto to static and back, APT may fail to reconnect all WDU’s.

MXCWAPT Component GUI

• When using 2, 3, or 5 buttons Secret Vote, the Chairman GUI will incorrectly show the individual voting results after the vote has stopped.  The exported results will also incorrectly show the individual voting results.
• When running Windows-Version:1809, cannot access APT CGUI when opened via DNS Name applied directly to the browser search bar or with Shure Discovery Application short cut. Opening APT CGUI via IP address works as designed.
• APT help topics are not translated in Thai, Turkish, Lithuanian, Polish, Catalan and Basque languages.
• When performing Identify on a range, if that identify includes only the second side of a Dual Delegate unit, the unit does not light up. If the range includes the first side or both, the unit operates as expected.

MXCW640

• MXCW640 Left/Right buttons incorrect LED indication when using FIFO conference mode with Dual-Delegate or while identifying units while in Request List.
• In very rare occasions, MXCW640 touch screen will not respond to screen touch.  Resolved by power cycling unit.
• Some MXCW640 text is cut off for some languages.
• MXCW640 loudspeakers do not unmute when Ambient Mode is enabled but no Ambient Units are registered.  Resolve by disabling Ambient Mode when no Ambient units are planned to be used.
• If a unit is set as a Remote Caller and the number of microphone slots reserved for active speakers is set to 8 in the component GUI, the Remote Caller unit does not display an error message.
• If a unit is set as a Remote Caller selecting an interpretation channel does not have any effect in the audio being routed to the remote caller, only floor is routed to the remote caller.

TPCI

• Once MXCW640s are set to Ambient Role, unit will no longer respond to TPCI strings that are indexed based off of seat number.
• Once MXCW640s are set to Ambient Role, and rebooted, unit will no longer send TPCI strings when changing role to other than Ambient (Chairman, Delegate, Interpreter etc). Resolved by power cycling the unit, while not in Ambient role.
• Rare TPCI errors reporting a single MXCW640’s when transitioning roles from Ambient. Resolved by restarting unit.

SOFTWARE

• Shure Discovery Application missing MXCWAPT AES67 indication.

MXCWNCS

• The MXCWNCS does not have support for Catalan, Polish and Basque

Notes

• User Guide
• To use MXCW version 4.0.9 with other Shure software, reference the following list of minimum versions:
  • Shure Update Utility 2.4.8
  • Shure Web Device Discovery 1.2.9
  • Shure NFC Programming Application 1.0.3

バグ修正

• スマートフォンの言語がイタリア語に設定されている場合にファームウェアアップデートがクラッシュすることがある問題を修正

注記

• ユーザーガイド
• Android 8.0以上に対応しています。それ以前のオペレーティングシステムとの互換性または完全動作は保証できません。問題の報告や全体的なフィードバックはアプリからお送りください（「設定」>「フィードバック」）。

Initial Release

Notes

• User Guide
• Command Strings
• To operate MXA710 version 1.0.5 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate MXA710 version 1.0.5 with Shure software or other Shure networked systems, reference the following list of minimum versions supported:
  • Shure Designer 4.2
  • IntelliMix® Room 2.0
  • MXA-MUTE 1.0.8
  • MXN5-C 1.0.6
  • MXA910 4.2.18
  • ANI22 4.2.18
  • ANI4IN 4.2.18
  • ANI4OUT 4.2.18
  • ANIUSB-MATRIX 4.2.19
  • MXA310 4.2.18
  • Microflex Wireless 8.0.3
  • P300 IntelliMix® Audio Conferencing Processor 4.2.4
  • ULXD4D/4Q 2.4.9
  • SCM820 1.3.3
  • Shure Update Utility 2.4.8
  • Shure Web Device Discovery 1.2.9

Initial Release

Known Issues

• Factory reset occasionally fails to reset Dante settings and/or fully disable encryption. Solution:Reboot the device if unable to route audio after factory reset.
• If enrolling, unenrolling, or changing Dante Domain settings and selecting “Clear Config,” the device may mute its audio output indefinitely.  Solution: Reboot the device following this operation to avoid possible adverse behavior.”

Notes

• User Guide
• Command Strings
• To operate MXN5-C version 1.0.6 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate MXN5-C version 1.0.6 with Shure software or other Shure networked systems, reference the following list of minimum versions supported:
  • Shure Designer 4.2
  • IntelliMix® Room 2.0
  • ANI22 4.2.18
  • ANI4IN 4.2.18
  • ANI4OUT 4.2.18
  • ANIUSB-MATRIX 4.2.19
  • MXA310 4.2.18
  • MXA910 4.2.18
  • MXA710 1.0.5
  • Microflex Wireless 8.0.3
  • P300 IntelliMix® Audio Conferencing Processor 4.2.4
  • ULXD4D/4Q 2.4.9
  • SCM820 1.3.3
  • Shure Update Utility 2.4.8
  • Shure Web Device Discovery 1.2.9