ソフトウェア/ファームウェア アーカイブ

These release notes cover the following models: 

• MXWAPT2/4/8 Access Point Transceivers 

Important

• Update any MXW devices which are below the minimum supported firmware 8.0.3 by using the Shure Update Utility (SUU) found here.  Please note – should the firmware version used be older than 5.2.2, it is advised to upgrade to version 5.2.2 first before updating to any subsequent more recent releases. Close the SUU when complete.

Bug Fixes

• The following bug was fixed in this version: When an MXWAPT8 access point is associated with two MXWNCS8 chargers, it is not possible to link all eight MXW8 mics. APT channels 5 - 8 are not linked to any mics.

Known Issues

• Multiple Primary Leader Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet

Notes

• User Guide
• Quick Start Guide
• Crestron/AMX Control Strings
• To operate this version of MXW with other Shure networked systems, see the following list of recommended software and firmware versions:
  • SCM820 1.4.3
  • Shure Web Device Discovery 1.2.17
  • Shure Update Utility 2.7.2
  • SystemOn 4.7.2

New Features

• Added workflows to enable IntelliMix Room 4.0 Built-In Trial Licenses

Pre-Upgrade Requirements

• Requires Windows 10 (Professional or Enterprise), 64-bit edition
• This version of Designer is currently supported on PC only
• Multiple versions of Designer cannot be installed on the same computer
• Designer and SystemOn cannot be installed on the same computer

Upgrade Path

• Designer versions 3.0 and 3.1 must be upgraded to 3.2 first, before upgrading to this version of Designer. Download Designer 3.2 here.
• If you encounter an Installer failure during upgrade, allow the uninstaller process to finish, then restart installation
• Export project files before upgrading Designer
• Certain endpoint protection software may block the application, if you encounter this anomaly, whitelist the Designer installer or application

Known Issues

• IntelliMix Room not discovered by Dante Domain Manager until IMXR upgrade, reinstall, or factory reset
  • Workaround:
    • Upgrade or reinstall IntelliMix Room
    • Perform a factory reset of IntelliMix Room
• IntelliMix Room cannot enroll into Dante Domain Manager across Subnet
• Mute Sync does not work on Microsoft Teams Rooms when you join Zoom Rooms call

Notes

• User Guide
• To update firmware, please download Shure Update Utility
• Project files and database are not backward compatible with versions prior to 4.5
  • Templates saved in earlier versions of Designer are moved to a project named ‘Templates’ beginning in version 4.5.0
• This version of Designer is compatible with the following recommended software and firmware versions:
  • IntelliMix Room 4.0.0
  • ANIUSB-MATRIX 4.7.17
  • MXA310 4.7.8
  • MXA710 1.5.15
  • MXA910 4.7.13
  • MXA920 1.3.283
  • MXA-MUTE 1.5.16
  • MXN5-C 1.5.12
  • P300 4.7.17

Important

• If you’re currently running IntelliMix Room 1.0, you must update to 2.0 first before installing 3.0 or later
• To fully configure IntelliMix Room, download and install Shure Designer on a separate computer. Shure does not support installing Designer and IntelliMix Room on the same computer.
• All existing trial licenses will no longer function with IntelliMix Room 4.0 and later. Instead, use the built-in trial feature offered in version 4.0 and later. 

New Features

• Added the “Room Setup” feature. Configure and optimize IntelliMix Room and connected Shure devices quickly with Shure's recommended settings, directly from the host computer.
• Improved the free trial experience. Start a trial immediately after installing the software without placing an order.
• Added support for remote monitoring with the Crestron XiO Cloud platform

Known Issues

• If downgrading from 4.0 or later to any previous version, the IntelliMix Room license must be re-activated. 
• Packet scanning security software may cause audio performance issues with IntelliMix Room.
• When renewing a license, IntelliMix Room will use the 90-day grace period of the expired license before activating the new, renewed license. After the grace period ends, the new license will automatically activate and the expiration message in the user interface will disappear.
• The USB Mute Synchronization and Call Status features do not properly reflect LED statuses when joining third-party meetings from Microsoft Teams Rooms (MTR) devices.
• In scenarios where many NICs are connected to the IntelliMix Room host computer, IntelliMix Room may not be discoverable in Designer software. Remove or disable some of the NICs to enable discovery in Designer software.
• In scenarios where many audio soundcards are connected to the IntelliMix Room host computer, some of the connected devices may be truncated from PC Input or Output list views within Designer Software. Shure recommends removing or disabling the unneeded audio soundcards.
• Changing the System Name of the host computer after installation of IntelliMix Room also changes the Dante Device name in Dante Controller. The Shure device name stays the same. Changing the Dante Device name can impact audio routes to Dante receive devices.
• Ensure that the system/device name of the computer running IntelliMix Room is unique and follows Microsoft’s recommendation of 15 characters or less. IntelliMix Room relies on this unique name for proper Shure and Dante network operation.
• Allowing a system running IntelliMix Room to enter a sleep state can cause issues with IntelliMix Room’s logic and mute synchronization functionality. A restart of the computer resolves the issue.
• In some scenarios when using Dante Domain Manager with Shure devices, IntelliMix Room may appear as “Dante Locked” regardless of the device permissions set in Dante Domain Manager. In this state, IntelliMix Room networked audio settings cannot be customized. To resolve this, unenroll and reenroll IntelliMix Room within Dante Domain Manager.

Notes

• User Guide
• Installation and Deployment Guide
• Quick Start Guide
• This version of IntelliMix Room is compatible with the following recommended software and firmware versions:
  • Designer 4.7.5
  • ANI22/ANI4IN/ANI4OUT 4.7.6
  • ANIUSB-MATRIX 4.7.16
  • MXA310 4.7.8
  • MXA710 1.5.13
  • MXA910 4.7.13
  • MXA-MUTE 1.5.15
  • MXA920 1.3.283
  • Microflex Wireless 10.0.7
  • P300 4.7.11

Improvements

• Added On-screen volume/mute controls to all screens
• Added Speaker to Room Design
• Added a new view to Room Design to show Speaker Coverage
• Updated device icons

Improvements

• Added Stem Speaker to Room Design
• Added a new view to Room Design to show speaker coverage for all devices
• Updated device icons
• Additional improvements
  • Improved Mute Sync functionality with Teams Desktop and MTR and other codecs 
  • Improved firmware upgrade request via HTML on the Organization Settings window
  • Improved Network Device Discovery on some corporate networks
  • Fixed issue with not been able to factory reset some units

Improvements

• Added On-screen volume/mute controls to all screens
• Added Stem Speaker to Room Design
• Added a new view to Room Design to show speaker coverage for all devices
• Updated device icons

Improvements

• General enhancements

Known Issues

• When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 4.3 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving.
  • Workaround: hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari)

Notes

• User Guide
• Command Strings
• To operate this version of MXA710 with Dante Controller, reference the following minimum versions:
  • v3.10.2.4 (Windows)
  • v3.10.2.3 (Mac OS X)
• To operate this version of MXA710 with Shure software or other Shure networked systems, reference the following list of recommended versions supported:
  • Designer 4.7.5
  • ANI22/ANI4IN/ANI4OUT 4.7.6
  • ANIUSB-MATRIX 4.7.17
  • MXA310 4.7.8
  • MXA910 4.7.13
  • MXN5-C 1.5.12
  • MXA-MUTE 1.5.16
  • Microflex Wireless 10.0.8
  • P300 4.7.17
  • ULXD4D/4Q 2.7.3
  • SCM820 1.4.3
  • Shure Update Utility 2.7.2
  • Shure Web Device Discovery 1.2.17

Improvements

• General enhancements

Known Issues

• When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 4.3 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving.
  • Workaround: hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari)

Notes

• User Guide
• Command Strings
• To operate this version of MXA710 with Dante Controller, reference the following minimum versions:
  • v3.10.2.4 (Windows)
  • v3.10.2.3 (Mac OS X)
• To operate this version of MXA710 with Shure software or other Shure networked systems, reference the following list of recommended versions supported:
  • Designer 4.7.5
  • ANI22/ANI4IN/ANI4OUT 4.7.6
  • ANIUSB-MATRIX 4.7.17
  • MXA310 4.7.8
  • MXA910 4.7.13
  • MXN5-C 1.5.12
  • MXA-MUTE 1.5.16
  • Microflex Wireless 10.0.8
  • P300 4.7.17
  • ULXD4D/4Q 2.7.3
  • SCM820 1.4.3
  • Shure Update Utility 2.7.2
  • Shure Web Device Discovery 1.2.17

Improvements

• Fixed issue related to recording with 44.1kHz sample rate on iOS 16

Known Issues

• A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
• If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.
• When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real-time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

• MV7 User Guide
• MV88+ User Guide
• MV88 User Guide
• Frequently Asked Questions
• This app is compatible with iOS 14 or later. We can’t ensure compatibility or full feature functionality with older operating systems.
• Compatible with iPhone, iPad, iPod touch, and Apple Watch
• Please report problems and submit general feedback through the app (About > Feedback)

Improvements

• General enhancements

Known Issues

• The FPS and resolution combinations available for selection will vary based on the user’s phone.
• If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.

Notes

• MOTIV Video User Guide
• MV88+ Video User Guide
• MV88 User Guide
• Frequently Asked Questions
• This app is compatible with iOS 14 or later. We can’t ensure compatibility or full feature functionality with older operating systems
• Compatible with iPhone and Apple Watch – iPad and iPod Touch are not supported
• Please report problems and submit general feedback through the app (About > Feedback)