सॉफ्टवेयर और फर्मवेयर अभिलेखागार

Improvements

• New product support for MXWNAPX, MXWNDX, MXWX devices
• For devices with a web browser UI, hovering over the IP address now indicates that you can click on it to launch the UI.

Bug Fixes

• MXA902 now updates as expected when using self-assigned IP addresses
• MXWAPT4 now displays correctly in the Update Devices tab
• When MXWN is set to downgrades disabled, the correct packages now display in the update list for MXWN proxied devices.
• The following menu links under Help now load properly in a web browser: Help System, View Release Notes and Check for SUU updates

Known Issues

• The app may crash when connecting or disconnecting Ethernet while the Event Log is open.
  • Workaround: Close the Event Log before connecting or disconnecting hardwired Ethernet.
• When updating SLX-D receivers and transmitters at the same time, the update may fail on the first try.
  • Workaround: Retry the update or update each device individually to successfully update the devices. This will not hurt or damage your devices.
• Shure Update Utility will fail to discover on first connection an ADX5D on Mac M1 machines running macOS Monterey 12.
  • Workaround: Update to macOS Sequoia, or restart your Mac computer and ADX5D will be discovered successfully.
• SUU fails to launch after installation on macOS Ventura 13 or macOS Sonoma 14.
  • Workaround: Update to macOS Sequoia, or Navigate to System Settings -> Privacy and Security, scroll down to SUU notification, click on Open Anyway, and enter the password.
• Device discovery is delayed by up to 20 seconds when the device network includes GLX-D+ receivers running firmware version 2.0.17 or previous.
  • Solution: Update to 2.0.18 version or later.
• ULX-D receivers running versions prior to 1.4.8 must be updated to 1.4.8 first before updating to 2.0.28. After 2.0.28 is installed, ULX-D devices can be updated to the latest available firmware version. See ULX-D Firmware Update and Issues.
• ULX-D devices that are downgrading to 1.5.6 may report a false failure.
  • Workaround: Because this is a false failure, closing the send updates window and going to the main page, Shure Update Utility will show green for the firmware version.
• Microflex Wireless devices running versions prior to 5.2.2 must be updated to 5.2.2 first before updating to a later firmware version.

Important

• In most cases, you should install the latest version of Shure Update Utility to update your devices. However, certain legacy devices require older versions of SUU or a different tool:
  • Use Shure Update Utility 2.4.8 to update firmware on GLX-D, UHF-R, SHA900, and KSE1500 systems or for 32-bit support.
  • Use Shure Update Utility 2.4.1 to update firmware on PSM1000 systems running firmware 1.1.0 or earlier.
  • Use the Stem Upgrader app on a Windows 10 machine to update Stem products.
  • Use the MXC Firmware installer to update MXC products, including DIS-CCU.
  • Use the DFR22 Software and a PC running Windows 8.1 or earlier to update a DFR22.
  • Update MOTIV devices using the Motiv app (mobile and desktop) and AONIC devices the Play app.
  • Update Stem devices using the Stem Upgrader software
• Note: Installing SUU 2.4.8 or SUU 2.4.1 will replace the most recent version of SUU on your machine.

Notes

• User Guide

Compatibility

• Windows
  • Windows 10, Intel Only
  • Windows 11, Intel Only
• macOS
  • macOS Ventura 13, Intel and Apple Silicon
  • macOS Sonoma 14, Intel and Apple Silicon
  • macOS Sequoia 15, Intel and Apple Silicon

Improvements

• Bug fixes

Notes

• User Guide
• Please report problems and submit general feedback in the app settings page

Compatibility

• This app is compatible with Android 12 or later. We can’t ensure compatibility or full-feature functionality with older operating systems.

New Features

• Compact View – select and switch between the full MOTIV Mix app experience and the Compact View that mimics the previous MOTIV Desktop App experience with all of your MOTIV mic settings in a quickly accessible view.

Improvements

• Fixed issue for some users when saved MV7 settings would restore to default upon new app launch
• UI bug fixes
• Other bug fixes

Notes

• Shure MOTIV Desktop App should be uninstalled before using MOTIV Mix
• System Requirements:
  • Minimum 8 GB of RAM
  • 20% or more hard disk space recommended
• Not recommended for ARM-based PCs
• MOTIV Mix App User Guide
• MOTIV Device User Guides

Compatibility

• Compatible operating systems:
  • Windows 10 and 11
  • MacOS 13 and higher
• This version of MOTIV Mix is compatible with the following recommended firmware versions:
  • MV6 1.1.0.10
  • MV7+ 1.2.0.18
  • MV7i 1.2.0.14
  • MV7 1.2.19
  • MV88+ 1.1.18
  • MVX2U 1.2.1.358

New Features

• Livestream directly to Twitch
• Users can now create and log in to their ShureCloud account

Known Issues

• The FPS and resolution combinations available for selection will vary based on the user’s phone.
• Known issue where a microphone’s gain value does not get updated when manually entered in the Device tab

Notes

• MOTIV Video App User Guide
• MOTIV Device User Guides
• Frequently Asked Questions
• Please report problems and submit general feedback through the app (About > Feedback)

Compatibility

• This app is compatible with Android 12 or later. We can’t ensure compatibility or full-feature functionality with older operating systems.

New Features

• Livestream directly to Twitch
• Users can now create and log in to their ShureCloud account

Known Issues

• The FPS and resolution combinations available for selection will vary based on the user’s phone.
• Intermittent issue on iOS devices where phone will freeze if MV7i is unplugged while FW updating
• Intermittent issue on USB-C iOS devices where MV6 microphone is undiscovered after locking the phone for several minutes

Notes

• MOTIV Video App User Guide
• MOTIV Device User Guides
• Frequently Asked Questions
• Please report problems and submit general feedback through the app (About > Feedback)

Compatibility

• This app is compatible with iOS 17 or later. We can’t ensure compatibility or full-feature functionality with older operating systems.
• Compatible with iPhone, iPad, and Apple Watch

New Features

• Users can now create and log in to their ShureCloud account

Improvements

• Recording workflow improvements

Known Issues

• Intermittent issue found on some Google Pixel devices where recordings are not auto-saved when the device powers off due to low battery
• Intermittent issue found where app crashes during long (3+ hour) recordings in AAC formats. Recording may be unrecoverable

Notes

• MOTIV Device User Guides
• Frequently Asked Questions
• Please report problems and submit general feedback through the app (About > Feedback)

Compatibility

• This app is compatible with Android 12 or later. We can’t ensure compatibility or full-feature functionality with older operating systems.

New Features

• Users can now create and login to their ShureCloud account

Improvements

• Recording workflow improvements

Known Issues

• Intermittent issue on iOS devices where phone will freeze if MV7i is unplugged while FW updating
• Intermittent issue on USB-C iOS devices where MV6 microphone is undiscovered after locking the phone for several minutes

Notes

• MOTIV Device User Guides
• Frequently Asked Questions
• Please report problems and submit general feedback through the app (About > Feedback)

Compatibility

• This app is compatible with iOS 17 or later. We can’t ensure compatibility or full-feature functionality with older operating systems.
• Compatible with iPhone, iPad, and Apple Watch

Improvements

• Support for MXN-AMP hardware
• Software bug repairs

Bug Fixes

• ID-8089: Under heavy load in larger networks with ANIUSB, MXA920-S, MXN5-C, and MXA-MUTE, it may take over 10 seconds to auto route the virtual devices.
• ID-5962: Automatic conflict resolution is not happening in empty online room
• ID-8126: When MXA-920 auto position is started and the user starts and cancels the listen operation prior to auto position completing, the MXA-920 auto position may fail.
• ID-8264: When a room design file created in Designer 6.1 with MXA710 (with presets saved) is opened in DNG 6.2, the rotation value is not retained.
• ID-5697: ANIUSB, MXA310, or MXN5-C added to a Dante Domain, the device appears as locked in Designer even when the controller permissions allow users to make changes. The user is unable to deploy, enable encryption or make any Dante related changes.
• ID-7584: Designer 6 application may freeze in Sonoma MacOS and Windows 10, when left idle for a long duration (overnight).

PC Requirements

• Supported Operating Systems
  • Windows 10 (Professional or Enterprise), 64-bit edition
  • Windows 11 (Professional or Enterprise), 64-bit edition
• Minimum Hardware Requirements
  • Hard drive: >=5 GB (free space). (SSD 'Solid state' recommended)
  • RAM: 8 GB, 16 GB recommended
  • Screen: Preferable min. 1920x1080
  • Ethernet network connection (not required for installation, but required for working with the application)
  • IPv4 network only
  • Processor
    • 8-generation Core i5 family processor
    • 4 physical cores
    • 6 threads (logical processors)
    • Only Intel and AMD x64 architecture (64-bit) are supported. Arm-based Windows platforms shall not be supported
• SHA-256 Checksum
  • eec2ee8e6cc19d22c5aaa1a787d44ca454e2e90b81da1e3d8910ccc7b42eee76

macOS Requirements

• Supported Operating Systems
  • Ventura (macOS 13)
  • Sonoma (macOS 14)
  • Sequoia (macOS 15)
• Minimum Hardware Requirements
  • Apple M1 or Apple M2 (Intel i5 processor)
  • Hard drive: >=5 GB (free space). SSD 'Solid state' recommended) *)
  • Physical memory: 8 GB, 16 GB recommended
  • Screen: Preferable min. 1920x1080
  • Ethernet network connection (not required for installation, but required for working with the application)
  • IPv4 network only
• SHA-256 Checksum
  • 23d35345fb30c78252af01ae43030fe395cfae3062d80ee0b531141b1d24f488

Pre-Upgrade Requirements

• Users must export release 4.7.x project files (with extension .dprj) for import to Designer and then convert to room design files (with extension .rdf)
• Certain endpoint protection software may block the installation of Designer. If you encounter this issue, allow or whitelist the Designer Installer or application.
• Event Logs paths
  • Windows:
    • C:\Users\<user name>\AppData\Local\Shure\Shure Designer 6\logs
  • macOS
    • ~/Library/Logs/Shure Designer 6/

Steps to Update Designer

1. Users must update device firmware using Shure Update Utility. Ensure that each device is at the correct firmware version as indicated in the Compatibility section below.
2. Download Designer from the Shure website, and then install the application
3. Launch the Designer software application
4. Navigate to File > Preferences to open the Preferences tab.
5. Select the appropriate NIC to discover all the devices in ecosystem
6. Go to the Online devices to validate device firmware
7. Perform tasks as desired

Compatibility

• This version of Designer is compatible with the following recommended software and firmware versions:
  • IntelliMix Room 6.3.0
  • ANIUSB 6.2.14
  • ANIUSB V3 6.2.22
  • MXA-MUTE 6.2.6
  • MXA310 6.2.0
  • MXA710 6.2.74
  • MXA901 6.2.46
  • MXA902 6.2.56
  • MXA910 6.2.0
  • MXA920 6.2.59
  • MXN-AMP 6.4.47
  • MXN5-C 6.2.6
  • MXN5-C V3 6.2.160
  • P300 6.2.44
• It is imperative to use Shure Update Utility to update all devices to the specified firmware version indicated above.
• It is highly recommended to remember or keep records of your device passphrases for future reference
• It is highly recommended that your device credentials (passphrases) be stored in a secured system

File Conversion

• Project file conversion from Designer version 3.X is not supported in Designer 6.
• Reference the following steps to convert Designer 4.X project files (.dprj) to Designer 6Room design files (.rdf):
  • To export projects from Designer 4.X:
    1. Open Designer 4.X
    2. Go to “my projects”
    3. Click on the 3 dots in right side of your project – select “Export”
    4. A <your_project_name>.dprj file has been created and saved to default download folder
  • To import into Designer 6:
    1. Open Designer 6
    2. Go to “File -> Open”
    3. Navigate to and select <your_project_name>.dprj
    4. Import file dialog appears – click “Choose save location”
    5. Select a folder where the converted room files should be stored e.g <my_rooms>
    6. Dialog appears that shows all rooms contained in the <your_project_name>.dprj file
    7. Select all the rooms that you want to import
    8. Click on “Open selected rooms”
    9. All rooms selected are now opened in their own tab
    10. All room files are stored in my_rooms>/<your_project_name>/<room_name>.rdf

Known Issues

• ID-8954: In a rare occurrence, user may notice in P300 design configuration routing lines created outside (in SDC) may do not show up in routing view.
  • Workaround: From the routing view, switch between tabs for the routing lines to appear
• ID- 8845: In a rare occurrence, the MXA710 device authentication could cause the device to reboot from outside (SDC) of designer.
  • Workaround: Close and relaunch the Designer Application
• ID-6479: Deploying more than 60 devices my cause the device discovery process to crash
  • Workaround: Limit the number of devices during deployment to 30.
• ID-8276: Active preset for P300 and MXA310 may not be preserved or become inactive after upgrading Designer version 4.7.45 to Designer 6 version 6.2.0
  • Workaround: Re-Apply the desired room preset in Designer or 3rd party control system if applicable
• ID-8132: The Room preset slot does not properly detect a conflict state when a missing device which comes back online has different preset name in slot 1 when compared to other online devices in the room.
  • Workaround: If this issue occurs, quit and relaunch the Designer Application or contact Shure support
• ID-6479: Deploying between 30 and 60 devices in a room may degrade the Designer 6 application performance and then crash device discovery software processes
  • Workaround: Limit device deployment to 30 in a room
• ID-8186: MXA910, MXA310 and ANIUSB-MATRIX devices password state incorrectly changed to locked state even if they are unlocked in same designer session, and Deployment failed is displayed
  • Workaround: If this issue occurs, contact Shure support
• ID-7760: When you create a live room with MXA310 and MXA910 devices, set a password, and then attempt to import presets for individual device creates an authentication loop where the user no longer can access the device.
  • Workaround: Restart the Designer application
• ID-9350: Designer application may sometimes fail to complete saving room design file fully. This anomaly happens when file save workflow is interrupted, resulting in the inability to open the saved file.
  • Workaround: Prior to making changes to any room design, ensure that the room design file is saved. Afterwards, wait for the Designer Application File Save process to be fully complete or written before closing.
• ID-8601: Designer does not show the Allow Firmware Downgrades option in the Services tab of the MXN-AMP.
  • Workaround: Upgrade the MXN-AMP firmware to version 6.4.47.0
• ID-8624: MXN-AMP analog outputs are disabled when Output mode is switched between LoZ and 70V mode.
  • Workaround: Upgrade the MXN-AMP firmware to version 6.4.47.0
• ID-8732: MXN-AMP outputs tab displays the channel output label “Speaker Output” instead of “Analog Output”.
  • Workaround: Upgrade the MXN-AMP firmware to version 6.4.47.0
• ID-8746: MXN-AMP Matrix Mixer behavior in 70V mode could automatically show Dante Output 1 routed to all Input channels
  • Workaround: Upgrade the MXN-AMP firmware to version 6.4.47.0
• ID-9373: After upgrading Designer to version 6.2.20.53, it has been observed that MXN-AMP device may be removed automatically(evicted) from online room with a few (4.5) seconds after deployment. This anomaly occurs intermittently.
  • Workaround: Redeploy the .rdf file

Notes

• User Guide
• To update firmware, please download Shure Update Utility

Improvements

• General backend improvements

Notes

• User Guide
• To operate this version of AD600 with other Shure networked systems, see the following list of recommended software and firmware versions:
  • Axient Digital 1.4.15
  • Shure Update Utility 2.8.7
  • ShurePlus Channels iOS 1.6.2
  • ShurePlus Channels Android 1.6.3
  • Wireless Workbench 7.4.0

Improvements

• General backend improvements

Important

• ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version. 

Notes

• User Guide
• To update firmware for ULXD6/8 transmitters with ULX-D or QLX-D receivers:
  1. Update receivers to the following minimum versions:
     • ULXD4, ULXD4D, and ULXD4Q Receivers 2.1.16 or higher
     • QLXD4 Receivers 2.1.5 or higher
  2. Using Shure Update Utility, download ULXD6/8 transmitter firmware to the receivers.
  3. Using the FW Update menu on a receiver, update transmitters.
• To update ULXD6/8 transmitters firmware while they are docked in an SBC250/450/850 Networked Charging Station:
  1. Place transmitters on charging station and ensure charging station is connected to the network.
  2. Launch Shure Update Utility to find firmware updates.
  3. Download updates and select Send Updates.

Compatibility

• To operate this version of ULXD6/8 devices with other Shure networked systems and software, see the following list of recommended versions:
  • QLXD 2.7.1
  • SBC250/450/850 Networked Charging Stations 2.8.6
  • Shure Update Utility 2.8.7
  • ShurePlus Channels iOS 1.6.2
  • ShurePlus Channels Android 1.6.3
  • Wireless Workbench 6.15.4 or 7.4.0