Leve seu microfone sem fio a um novo patamar.

WWB6

Wireless Workbench® 6

O Wireless Workbench oferece controle total dos sistemas Shure em rede para fornecer uma interface para gerenciar todos os aspectos de um desempenho. Inclui parâmetros que podem ser salvos, hardware de digitalização da Shure, visibilidade detalhada do espectro e área de trabalho de coordenação.

O Wireless Workbench® 6 permite monitorar e gerenciar remotamente todos os sistemas de microfones sem fio e monitores in-ear da Shure sem interromper a produção. Interface de usuário detalhada. Recursos robustos. Gerencie e monitore o desempenho do sistema sem fio pela sua rede. O recurso Timeline permite até mesmo rastrear dados de RF e revisar sua eficiência na pós-produção. Do planejamento antes do show à análise pós-apresentação, o Wireless Workbench® 6 proporciona total tranquilidade na hora do show.

Gestão rápida

Os usuários podem salvar configurações de parâmetros e aplicá-las rapidamente para um manuseio mais simples do dispositivo.

Coordenação dinâmica

A RF raramente é consistente. Tenha maior flexibilidade para classificar e gerenciar os picos do seu scan e personalizá-los de forma dinâmica, acompanhando você.

Rede empresarial

As sub-redes permitem que você conecte remotamente mais dispositivos, e o controle de acesso garante que apenas os usuários certos possam operar em sua rede.

  • Download grátis
  • Atualização integrada por meio do Shure Update Utility
  • Compatível com Windows 8 e 10 e Mac OS X High Sierra, Mojave, Catalina, e Big Sur
  • Use com seu computador para gestão em movimento

Download WWB6

Versão 6.14.0 | View All Updates

Vídeos

WWB6 Vídeos

Casos de Sucesso

Difficult wireless environment finds improvement with Shure RF

Difficult wireless environment finds improvement with Shure RF

12 channels of Shure's flagship Axient wireless microphone system have been installed for use at Bregenz's international music and performing arts festival in Western Austria.

Produtos Compatíveis

ULXD4Q

Receptor Sem Fio Digital de Quatro Canais

Receptor Sem Fio Digital de Quatro Canais

QLXD4

Receptor Digital Sem Fio

Receptor Digital Sem Fio

ULXD4

Receptor Sem Fio Digital

Receptor Sem Fio Digital

ULXD4D

Receptor Sem Fio Digital de Dois Canais

Receptor Sem Fio Digital de Dois Canais

P10T

Transmissor sem fio de dois canais de rack completo

Transmissor sem fio de dois canais de rack completo

SBRC

Carregador SBRC de rack de Bateria Shure

Acomoda até 8 BodyPacks recarregáveis da Shure e baterias do transmissor de mão em um espaço de rack único.

AD610

Pontos de acesso Diversity ShowLink® AD610

O AD610 fornece uma conexão ShowLink® entre todos os transmissores e receptores vinculados.

AD4D

Receptor Wireless Digital de Dois Canais AD4D

Compatível com todos os transmissores da série AD e da série ADX.

AD4Q

Receptor Wireless Digital de Dois Canais AD4Q

Compatível com todos os transmissores da série AD e da série ADX.

ULXD6

Transmisor Inalámbrico de Superficie

Transmisor Inalámbrico de Superficie

ULXD1

Transmissor Sem Fio Bodypack

Transmissor Sem Fio Bodypack

Suporte

Suporte ao Cliente

Serviço e Manutenção

Informação detalhada sobre números de SAC e peças de reposição

Serviço e Manutenção

Contato

Abra um chamado diretamente com o Time de Suporte da Shure ou fale conosco por e-mail e telefone.

Contato

Recursos

Shure Tech Portal

Documentação completa de produtos, materiais de suporte técnico, software, firmware e outras ferramentas e recursos para todos os produtos Shure, tudo em um só lugar.

Registrar-se launch

Documentos

Release Notes

Version 6.14.0

New Features

  • Added support for creating up to twelve custom Compatibility Profiles for any Equipment Profile.
    • Create from a new profile from scratch or duplicate an existing profile. Modify filter and spacing parameters. Export profiles to share with your team. Deploy frequencies to online or offline equipment in the inventory, even when they use custom Compatibility Profiles.
    • Improved Equipment Profile dialog with graphical user interface.
    • Coordination Workspace (CWS) files created in previous versions of the application are automatically converted upon import but must be saved using this version so that conversion is not required again.
  • Added support to import third-party scan files generated by TTi, RF Explorer, and WinRadio scanners, and Sennheiser receivers.
    • Additional support for multi-sweep scan files from RF Explorer.
    • Continued support for importing scan data in .CSV and .TXT files where the data consists of frequency (decimal notation in MHz) and amplitude (decimal notation in dBm), separated by a comma.

New Device and Frequency Band Support

  • Added support for viewing Q5X transmitter side-channel data in Axient Digital channel strips.
  • Added support for new Shure frequency bands:
    • BLX G18 | 470.000 – 494.000 MHz
    • BLX L27 | 674.000 – 698.000 MHz
    • SVX G21 | 480.000 MHz – 492.000 MHz
    • SVX G22 | 492.000 – 504.000 MHz
    • SVX L21 | 630.000 – 642.000 MHz
    • SVX L22 | 642.000 – 654.000 MHz
    • SVX L24 | 666.000 – 678.000 MHz
    • SVX L25 | 686.000 – 698.000 MHz

Coordination 

  • Updated the offline TV channel database for the following countries:
    • Australia – now includes VHF data
    • Hungary – post-700 MHz clearance
    • Germany – updated effective radiated power (ERP)
    • United States – post-600 MHz transition
  • Fixed an issue where changes to the AXT600 Spectrum Manager scan settings were not affecting the device.
  • Fixed an issue where the Effective Bandwidth Filter plot overlay was not updating after a custom Equipment Profile was edited and the frequency was removed and re-added to the Coordination Workspace (CWS).
  • Fixed an issue where the Select All/Deselect All control in the Scan Sources table was being applied to all possible scan sources, even if the list was filtered using the search bar.
  • Fixed an issue where the Coordination Workspace (CWS) plot was sometimes visually squashed after navigating to away from the Frequency Coordination tab, changing the size of the application window, and then returning to the Frequency Coordination tab.

Timeline

  • Updated the default Timeline filename to include the date and time it was started instead of the time it was stopped.
  • Fixed an issue so that Timeline files that are recovered after a crash now include the Timeline view name in the filename.
  • Fixed an issue where Mini-Timeline widgets cannot be added to monitor views in certain scenarios.

General

  • Supported on macOS 11.0 Big Sur. (Please note that support for Apple computers with M1 chips are not yet supported).
  • Improved user interface for AD610 and AXT610 ShowLink access point properties panels.
  • Improved user interface for AXT600 Spectrum Manager properties panels.
  • Fixed an issue where the application sometimes crashed in the background when attempting to change an IP address while the application was already trying to close.
  • Fixed an issue where devices on separate subnets of a network configured for multicast traffic would be discovered inconsistently. It is also recommended to use the Remote Device Connection feature to manage cross-subnet communication.
  • Fixed an issue where the link icon for ShowLink-capable transmitters is sometimes not visible in the corresponding receiver’s properties panel.
  • Fixed an issue where scans can be started or stopped when the application is in Monitor Only Mode.
  • Fixed an issue where ShowLink status was not presented in monitor widgets in certain scenarios.
  • Fixed an issue where the Settings Conflict dialog was not triggered for Axient Digital and Axient receivers at the time a Show File was loaded if the receiver was simultaneously experiencing interference.
  • Fixed various minor user interface issues to improve text visibility.

Known Issues

  • ULX-D receivers running firmware version 2.0.28 or earlier may trigger a Settings Conflict when rediscovered after updating their firmware to version 2.1 or later. There is no issue with the device—there was simply a new property added in version 2.1. To dismiss the alert, resolve the Settings Conflict by selecting the properties you wish to keep.
  • The Timeline System Event “Active Transmitter Online” for ULXD6/8 transmitters does not always include Transmitter Device ID in the event description.
  • Mac computers with i5 processors running Timeline may experience an application crash after an indeterminate period of time. A resolution is being investigated.
  • SLX and ULX frequencies in Master List mode cannot be manually entered in the Coordination Workspace. They can, however, be coordinated and analyzed.

Notes

  • To operate Wireless Workbench successfully, you must run it as an administrator. This includes when updating from within the application using version 6.13.1 or prior. Consult your IT department if you have questions about enabling administrator permissions on your computer.
  • Opening show files created with older versions of Wireless Workbench may result in the Settings Conflicts dialog opening once the file has loaded. This is due to newly supported hardware parameters that have been introduced with updated firmware versions. To maintain all settings from the show file, select "Keep all settings from: Wireless Workbench."
  • Alerts logged when devices first come online may list device parameters and their values as they are being discovered even though the parameter values themselves have not changed.

Produtos Relacionados

ShurePlus™ Channels

Aplicativo Móvel para iOS

Aplicativo Móvel para iOS

SUU

Utilitário de atualização da Shure

A Shure Update Utility agiliza o processo de atualização do firmware e software de produtos compatíveis da Shure.