SBC250/450/850 Firmware Release Notes

Networked Charging Stations

Version 2.4.9 

Release Date: 11/11/2019 

Improvement  

  • Changed version number to allow all ULX-D devices in a configuration to have the same firmware version.  

Known Issue  

  • SBC250/450/850 devices are not compatible with SystemOn 2.0-3.0.1  

Notes  

  • SBC250 User Guide 

  • SBC450/850 User Guide  

  • To set up ULXD6/8 transmitters to receive firmware updates while docked in SBC250/450/850 Networked Charging Stations, follow these steps:  

  1. Place transmitters on a charging station and ensure the charging station is connected to the network.  

  1. Launch Shure Update Utility to find firmware updates.  

  1. Download updates and select Send Updates.  

  • To operate SBC250/450/850 version 2.4.9 with other Shure networked systems and software, see the following list of minimum versions:  

  • ULX-D ULXD6/8 Transmitters and ULXD4/4D/4Q Receivers 2.4.9  

  • QLX-D QLXD4 Receivers 2.3.8  

  • Wireless Workbench 6.13.1  

  • Shure Update Utility 2.4.6  

  • ShurePlus Channels 1.4.2 

Version 2.3.6

Release Date: 12/5/2018

Important

  • SBC250/450/850 charging stations updated to version 2.3.4 or higher can’t be downgraded to version 2.2.24 or below.
  • ULX-D receivers must be on version 2.2.24 or higher and QLXD4 receivers on version 2.2.11 or higher in order to be used with SBC250 charging stations.
  • ULX-D receivers must be on version 2.1.6 or higher and QLXD4 receivers on version 2.1.5 or higher in order to be used with SBC450/850 charging stations.

Improvement

  • Resolves compatibility with updated hardware revision.

Known Issue

  • SBC250/450/850 devices are not compatible with SystemOn 2.0-3.0.1

Notes

  • SBC450/850 User Guide
  • To set up ULXD6/8 transmitters to receive firmware updates while docked in SBC250/450/850 Networked Charging Stations, follow these steps:
    1. Place transmitters on a charging station and ensure the charging station is connected to the network.
    2. Launch Shure Update Utility to find firmware updates.
    3. Download updates and select Send Updates.
  • To operate SBC250/450/850 version 2.3.6 with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD6/8 Transmitters and ULXD4/4D/4Q Receivers 2.3.4
    • QLX-D QLXD4 Receivers 2.2.11
    • Wireless Workbench 6.12.6
    • Shure Update Utility 2.4.3
    • ShurePlus Channels 1.4.2

 

Version 2.3.4

Release Date: 11/7/2018

Important

  • ULX-D receivers must be on version 2.2.24 or higher and QLXD4 receivers on version 2.2.11 or higher in order to be used with SBC250 charging stations.
  • ULX-D receivers must be on version 2.1.6 or higher and QLXD4 receivers on version 2.1.5 or higher in order to be used with SBC450/850 charging stations.

Improvement

  • Changed version number to allow all ULX-D devices in a configuration to have the same firmware version.

Known Issue

  • SBC250/450/850 devices are not compatible with SystemOn 2.0-3.0.1

Notes

  • SBC450/850 User Guide
  • To set up ULXD6/8 transmitters to receive firmware updates while docked in SBC250/450/850 Networked Charging Stations, follow these steps:
    1. Place transmitters on a charging station and ensure the charging station is connected to the network.
    2. Launch Shure Update Utility to find firmware updates.
    3. Download updates and select Send Updates.
  • To operate SBC250/450/850 version 2.3.4 with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD6/8 Transmitters and ULXD4/4D/4Q Receivers 2.3.4
    • QLX-D QLXD4 Receivers 2.2.11
    • Wireless Workbench 6.12.6
    • Shure Update Utility 2.4.3
    • ShurePlus Channels 1.4.2

 

Version 2.2.24

Release Date: 6/14/2018

Important

  • ULX-D receivers must be on version 2.2.24 and QLXD4 receivers on version 2.2.11 in order to be used with SBC250 charging stations.
  • ULX-D receivers must be on version 2.1.6 or higher and QLXD4 receivers on version 2.15 or higher in order to be used with SBC450/850 charging stations.

Improvement

  • Version number change to allow all SBC250/450/850 charging stations in a configuration with ULX-D transmitters to have the same firmware version.

Known Issue

  • SBC250/450/850 devices are not compatible with SystemOn 2.0-3.0.1

Notes

  • SBC450/850 User Guide
  • To set up ULXD6/8 transmitters to receive firmware updates while docked in SBC250/450/850 Networked Charging Stations, follow these steps:
    1. Place transmitters on a charging station and ensure the charging station is connected to the network.
    2. Launch Shure Update Utility to find firmware updates.
    3. Download updates and select Send Updates.
  • To operate SBC250/450/850 version 2.2.24 with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD6/8 Transmitters and ULXD4/4D/4Q Receivers 2.2.X
    • QLX-D QLXD4 Receivers 2.2.11
    • Wireless Workbench 6.12.4
    • Shure Update Utility 2.4.2
    • ShurePlus Channels 1.4.1

 

Version 2.2.23

Release Date: 5/22/2018

Important

  • ULX-D receivers must be on version 2.2.24 and QLXD4 receivers on version 2.2.11 in order to be used with SBC250 charging stations.
  • ULX-D receivers must be on version 2.1.6 or higher and QLXD4 receivers on version 2.15 or higher in order to be used with SBC450/850 charging stations.

New Feature

Improvements

  • Bug fixes

Known Issue

  • SBC250/450/850 devices are not compatible with SystemOn 2.0-3.0.1

Notes

  • SBC450/850 User Guide
  • To set up ULXD6/8 transmitters to receive firmware updates while docked in SBC250/450/850 Networked Charging Stations, follow these steps:
    1. Place transmitters on a charging station and ensure the charging station is connected to the network.
    2. Launch Shure Update Utility to find firmware updates.
    3. Download updates and select Send Updates.
  • To operate SBC250/450/850 version 2.2.23 with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD6/8 Transmitters and ULXD4/4D/4Q Receivers 2.2.X
    • QLX-D QLXD4 Receivers 2.2.11
    • Wireless Workbench 6.12.4
    • Shure Update Utility 2.4.2
    • ShurePlus Channels 1.4.1

 

Version 2.1.16

Release Date: 5/19/2017

New Feature

  • Initial release for SBC450 and SBC850 Networked Charging Stations

Known Issue

  • SBC450/850 version 2.1.16 Networked Charging Stations are not compatible with SystemOn 2.1

Notes

  • SBC450/850 User Guide
  • ULXD6/8 transmitters can receive firmware updates while docked in an SBC450 or SBC850 Networked Charging Station.
    1. Place transmitters on charging station and ensure charging station is connected to the network.
    2. Launch Shure Update Utility to find firmware updates.
    3. Download updates and click Send Updates.
  • To operate SBC450/850 version 2.1.16 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD6/8 Transmitters and ULXD4, ULXD4D, ULXD4Q Receivers 2.1.16
    • Wireless Workbench 6.12.2
    • Shure Update Utility 2.4
    • ShurePlus Channels 1.3.1