Software & Firmware Archives

Important

• ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

• Add support for China 470 MHz – 510 MHz frequency band (G53)

Notes

• User Guide
• To update firmware for ULXD6/8 transmitters with ULX-D or QLX-D receivers:
  • Update receivers to the following minimum versions:
    • ULXD4, ULXD4D, and ULXD4Q Receivers 2.1.16 or higher
    • QLXD4 Receivers 2.1.5 or higher
  • Using Shure Update Utility, download ULXD6/8 transmitter firmware to the receivers.
  • Using the FW Update menu on a receiver, update transmitters.
• To update ULXD6/8 transmitters firmware while they are docked in an SBC250/450/850 Networked Charging Station:
  • Place transmitters on charging station and ensure charging station is connected to the network.
  • Launch Shure Update Utility to find firmware updates.
  • Download updates and select Send Updates.
• To operate ULXD6/8 version 2.3.25 devices with other Shure networked systems and software, see the following list of minimum versions:
  • ULXD1/2/6/8 Transmitters and ULXD4/4D/4Q Receivers 2.3.25
  • SBC250/450/850 Networked Charging Stations 2.4.9
  • QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.3.24
  • Wireless Workbench 6.14.0
  • Shure Update Utility 2.5.1
  • ShurePlus Channels 1.4.5

New Feature

• Call Status support – Changes LED state to notify the user when the room is in a call (off hook) or out of a call (on hook). This feature requires connection to a P300, IntelliMix Room, or an ANIUSB with Logic and Call status enabled.
  • Default setting
    • On hook microphone LEDs off
    • Off hook microphone LEDs on

Improvements

• Bug Fixes

Known Issues

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
• When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 4.3 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period. To correct this, hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari)
• Shure Audio Encryption is not backwards compatible; all devices must be on version 4.1 or later firmware to use this feature

Notes

• User Guide
• Demo Web UI
• Command Strings
• To operate MXA910 version 4.4.11 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate MXA910 version 4.4.11 with Shure software or other Shure networked systems, reference the following list of minimum versions supported:
  • Shure Designer 4.4.0
  • Shure SystemOn 4.4.0
  • ANI22 4.4.8
  • ANI4IN 4.4.8
  • ANI4OUT 4.4.8
  • ANIUSB-MATRIX 4.4.14
  • MXA310 4.4.9
  • MXA710 1.2.1
  • MXA-MUTE 1.2.4
  • MXN5-C 1.2.1
  • Microflex Wireless 8.0.3
  • P300 IntelliMix® Audio Conferencing Processor 4.4.13
  • ULXD4D/4Q 2.4.25
  • SCM820 1.3.3
  • Shure Update Utility 2.5.1
  • Shure Web Device Discovery 1.2.9

New Feature

• Call Status support – Changes LED state to notify the user when the room is in a call (off hook) or out of a call (on hook). This feature requires connection to a P300, IntelliMix Room, or an ANIUSB with Logic and Call status enabled.
  • Default setting
    • On hook microphone LEDs off
    • Off hook microphone LEDs on

Improvement

• Bug Fixes

Known Issues

• Factory reset occasionally fails to reset Dante settings and/or fully disable encryption. Solution: Reboot the device if unable to route audio after factory reset.
• AES67 support is only available on UltimoX hardware
  • MXA310 devices manufactured as of July 2017 are compatible with AES67
• Shure Audio Encryption is not backwards compatible; all devices must be on version 4.1 or later firmware to use this feature
• If enrolling, unenrolling, or changing Dante Domain settings and selecting “Clear Config,” the device may mute its audio output indefinitely.  Solution: Reboot the device following this operation to avoid possible adverse behavior.”
• After updating from version 2.X to 4.2, Channel EQ settings return to their default settings.
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
• When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 4.3 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period. To correct this, hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari).
• The Mute Control Function command string response is incorrect when using <GET 0 ALL>
  • When using < GET MUTE_CONTROL_FUNC >, the response is as documented.
  • When using < GET 0 ALL >, the response should be mapped as follows:

Notes

• User Guide
• Demo Web UI
• Command Strings
• MXA310 version 4.4.9 is compatible with MXA310 devices running older firmware versions, but updating all devices used together to the same firmware version is recommended.
• To operate MXA310 version 4.4.9 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate MXA310 version 4.4.9 with Shure software or other Shure networked systems, reference the following list of minimum versions supported:
  • Shure Designer 4.4.0
  • Shure SystemOn 4.4.0
  • ANI22 4.4.8
  • ANI4IN 4.4.8
  • ANI4OUT 4.4.8
  • ANIUSB-MATRIX 4.4.14
  • MXA910 4.3.11
  • MXA710 1.2.1
  • MXA-MUTE 1.2.4
  • MXN5-C 1.2.1
  • Microflex Wireless 8.0.3
  • P300 IntelliMix® Audio Conferencing Processor 4.4.13
  • SCM820 1.3.3
  • Shure Update Utility 2.5.1
  • Shure Web Device Discovery 1.2.9

New Feature

• Call Status support – Changes LED state to notify the user when the room is in a call (off hook) or out of a call (on hook). This feature requires connection to a P300, IntelliMix Room, or an ANIUSB with Logic and Call status enabled.
  • Default setting
    • On hook microphone LEDs off
    • Off hook microphone LEDs on

Improvement

• Bug Fixes

Known Issues

• Factory reset occasionally fails to reset Dante settings and/or fully disable encryption. Solution: Reboot the device if unable to route audio after factory reset.
• AES67 support is only available on UltimoX hardware
  • MXA310 devices manufactured as of July 2017 are compatible with AES67
• Shure Audio Encryption is not backwards compatible; all devices must be on version 4.1 or later firmware to use this feature
• If enrolling, unenrolling, or changing Dante Domain settings and selecting “Clear Config,” the device may mute its audio output indefinitely.  Solution: Reboot the device following this operation to avoid possible adverse behavior.”
• After updating from version 2.X to 4.2, Channel EQ settings return to their default settings.
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
• When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 4.3 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period. To correct this, hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari).
• The Mute Control Function command string response is incorrect when using <GET 0 ALL>
  • When using < GET MUTE_CONTROL_FUNC >, the response is as documented.
  • When using < GET 0 ALL >, the response should be mapped as follows:

Notes

• User Guide
• Demo Web UI
• Command Strings
• MXA310 version 4.4.9 is compatible with MXA310 devices running older firmware versions, but updating all devices used together to the same firmware version is recommended.
• To operate MXA310 version 4.4.9 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate MXA310 version 4.4.9 with Shure software or other Shure networked systems, reference the following list of minimum versions supported:
  • Shure Designer 4.4.0
  • Shure SystemOn 4.4.0
  • ANI22 4.4.8
  • ANI4IN 4.4.8
  • ANI4OUT 4.4.8
  • ANIUSB-MATRIX 4.4.14
  • MXA910 4.3.11
  • MXA710 1.2.1
  • MXA-MUTE 1.2.4
  • MXN5-C 1.2.1
  • Microflex Wireless 8.0.3
  • P300 IntelliMix® Audio Conferencing Processor 4.4.13
  • SCM820 1.3.3
  • Shure Update Utility 2.5.1
  • Shure Web Device Discovery 1.2.9

New Feature

• Call Status support – Changes LED state to notify the user when the room is in a call (off hook) or out of a call (on hook). This feature requires connection to a P300, IntelliMix Room, or an ANIUSB with Logic and Call status enabled.
  • Default setting
    • On hook microphone LEDs off
    • Off hook microphone LEDs on

Improvements

• Bug fixes

Notes

• User Guide
• Command Strings
• To operate MXA710 version 1.2.1 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate MXA710 version 1.2.1 with Shure software or other Shure networked systems, reference the following list of minimum versions supported:
  • Shure Designer 4.4.0
  • MXA-MUTE 1.2.4
  • MXN5-C 1.2.1X
  • MXA910 4.1.414.11
  • ANI22 4.4.8
  • ANI4IN 4.4.8
  • ANI4OUT 4.4.8
  • ANIUSB-MATRIX 4.4.14
  • MXA310 4.4.9
  • Microflex Wireless 8.0.3
  • P300 IntelliMix® Audio Conferencing Processor 4.4.13
  • ULXD4D/4Q 2.4.25
  • SCM820 1.3.3
  • Shure Update Utility 2.5.1
  • Shure Web Device Discovery 1.2.9

New Feature

• Call Status support – Changes LED state to notify the user when the room is in a call (off hook) or out of a call (on hook). This feature requires connection to a P300, IntelliMix Room, or an ANIUSB with Logic and Call status enabled.
  • Default setting
    • On hook microphone LEDs off
    • Off hook microphone LEDs on

Improvements

• Bug fixes

Notes

• User Guide
• Command Strings
• To operate MXA710 version 1.2.1 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate MXA710 version 1.2.1 with Shure software or other Shure networked systems, reference the following list of minimum versions supported:
  • Shure Designer 4.4.0
  • MXA-MUTE 1.2.4
  • MXN5-C 1.2.1X
  • MXA910 4.1.414.11
  • ANI22 4.4.8
  • ANI4IN 4.4.8
  • ANI4OUT 4.4.8
  • ANIUSB-MATRIX 4.4.14
  • MXA310 4.4.9
  • Microflex Wireless 8.0.3
  • P300 IntelliMix® Audio Conferencing Processor 4.4.13
  • ULXD4D/4Q 2.4.25
  • SCM820 1.3.3
  • Shure Update Utility 2.5.1
  • Shure Web Device Discovery 1.2.9

New Feature

• Call Status support – Changes LED state to notify the user when the room is in a call (off hook LEDS on) or out of a call (on hook LEDs off). This feature requires Logic and Call status enabled and connection to a supported USB codec. This setting is disabled by default.

Known Issues

• Shure Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware to use this feature
• P300 Shure Audio Encryption sometimes has crackling sound on audio
• Shure Update Utility and Designer may not allow downgrading of new P300s shipped with 4.2.7 or higher due to a platform update to support future functionality and USB improvements
• P300s with firmware 4.3 require Designer versions 4.3 and higher and will NOT be supported in Designer versions 4.2.1 and earlier.

Notes

• User Guide
• Command Strings
• To operate P300-IMX version 4.4.13 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (macOS)
• To operate P300-IMX 4.4.13 with Microsoft Teams, reference the following minimum versions:
  • Microsoft Teams Desktop: 1.3.00.24755
  • Microsoft Teams Rooms: 4.6.20.0
• To operate P300-IMX version 4.4.13 with other Shure networked systems, reference the following list of minimum versions supported:
  • Shure Designer 4.4.0
  • ANI22 4.4.8
  • ANIUSB-MATRIX 4.4.14
  • ANI4IN 4.4.8
  • ANI4OUT 4.4.8
  • MXA310 4.4.9
  • MXA710 1.2.1
  • MXA_MUTE 1.2.4
  • MXN5-C 1.2.1
  • MXA910 4.4.11
  • Microflex Wireless 8.0.3
  • Shure Update Utility 2.5.1
  • Shure Web Device Discovery 1.2.9

New Feature

• Call Status support – Changes LED state to notify the user when the room is in a call (off hook LEDS on) or out of a call (on hook LEDs off). This feature requires Logic and Call status enabled and connection to a supported USB codec. This setting is disabled by default.

Known Issues

• Shure Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware to use this feature
• P300 Shure Audio Encryption sometimes has crackling sound on audio
• Shure Update Utility and Designer may not allow downgrading of new P300s shipped with 4.2.7 or higher due to a platform update to support future functionality and USB improvements
• P300s with firmware 4.3 require Designer versions 4.3 and higher and will NOT be supported in Designer versions 4.2.1 and earlier.

Notes

• User Guide
• Command Strings
• To operate P300-IMX version 4.4.13 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (macOS)
• To operate P300-IMX 4.4.13 with Microsoft Teams, reference the following minimum versions:
  • Microsoft Teams Desktop: 1.3.00.24755
  • Microsoft Teams Rooms: 4.6.20.0
• To operate P300-IMX version 4.4.13 with other Shure networked systems, reference the following list of minimum versions supported:
  • Shure Designer 4.4.0
  • ANI22 4.4.8
  • ANIUSB-MATRIX 4.4.14
  • ANI4IN 4.4.8
  • ANI4OUT 4.4.8
  • MXA310 4.4.9
  • MXA710 1.2.1
  • MXA_MUTE 1.2.4
  • MXN5-C 1.2.1
  • MXA910 4.4.11
  • Microflex Wireless 8.0.3
  • Shure Update Utility 2.5.1
  • Shure Web Device Discovery 1.2.9

New Features

• Call Status support – Changes the microphones LED state to notify the user when the room is in a call (off hook-LEDs on) or out of a call (on hook-LEDs off). This feature requires Logic and Call status enabled and connection to a supported USB codec. This setting is disabled by default.
• Device Type – Informs USB-connected codecs that the ANIUSB has AEC (acoustic echo cancellation) in the signal path. The user or codec* can then enable or disable the AEC on the codec.
  *Codec must support AEC disable for ANIUSB or have manual disable.
  • Speakerphone: Use for microphones without DSP (MXA310), or when the codec handles DSP.
  • Echo-canceling speakerphone: Use when microphones have IntelliMix DSP with AEC enabled (MXA710 or MXA910) or when the codec DSP is not needed.
  • Designer’s Optimize workflow chooses the correct setting for USB device type
  • USB device type changes take 3-4 seconds and audio drops out briefly. Do not change other settings while this takes effect.
  • Select the ANIUSB as the default audio device in the codec after making changes.

Known Issues

• Pop noise is triggered when the channel is unrouted in Dante controller with encryption enabled
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported.
• When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 4.3 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period. To correct this, hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari)
• Shure Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware or newer to use this feature
• ANI22/ANI4 - In AES67 mode - Audio does not pass after changing Dante Device name, followed by reboot
• ANI22-XLR reverses absolute phase from Analog in to Dante out – workaround is to enable “Invert polarity” for Dante Output

Notes

• User Guide
• Command Strings
• ANIUSB-MATRIX version 4.4.14 is compatible with ANIUSB-MATRIX devices running older firmware versions, but updating all devices used together to the same firmware version is recommended.
• To operate ANIUSB-MATRIX version 4.4.14 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (macOS)
• To operate ANIUSB-MATRIX 4.4.14 with Microsoft Teams, reference the following minimum versions:
  • Microsoft Teams Desktop: 1.3.00.24755
  • Microsoft Teams Rooms: 4.6.20.0
• To operate ANIUSB-MATRIX version 4.4.14 with Shure software or other Shure networked systems, reference the following list of minimum versions supported:
  • Shure Designer 4.3.0
  • ANI22 4.4.8
  • ANI4IN 4.4.8
  • ANI4OUT 4.4.8
  • MXA310 4.4.9
  • MXA910 4.4.11
  • Microflex Wireless 8.0.3
  • P300 4.4.13
  • ULXD4D/4Q 2.4.25
  • SCM820 1.3.3
  • Shure Update Utility 2.5.1
  • Shure Web Device Discovery 1.2.9

Improvements

• Bug fixes

Known Issues

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
• Shure Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware to use this feature

Notes

• User Guide
• Command Strings
• ANI22 version 4.4.8 is compatible with ANI22 devices running older firmware versions, but updating all devices used together to the same firmware version is recommended.
• To operate ANI22 version 4.4.8 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (macOS)
• To operate ANI22 version 4.4.8 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI4IN 4.4.8
  • ANI4OUT 4.4.8
  • ANIUSB-MATRIX 4.4.14
  • MXA310 4.4.9
  • MXA910 4.4.11
  • Microflex Wireless 8.0.3
  • ULXD4D/4Q 2.4.25
  • SCM820 1.3.3
  • Shure Update Utility 2.5.1
  • Shure Web Device Discovery 1.2.9