Downloads
Software & Firmware Archives
Firmware
10.0.6
February 28, 2022
View All Updates
These release notes cover the following models:
- MXWNCS2/4/8 Networked Charging Stations
- MXWANI4/8 Audio Network Interfaces
- MXWAPT2/4/8 Access Point Transceivers
- MXW1/2/6/8 Wireless Microphones
Important
- Update any MXW devices which are below the minimum supported firmware 8.0.3 by using the Shure Update Utility (SUU) found here. Please note – should the firmware version used be older than 5.2.2, it is advised to upgrade to version 5.2.2 first before updating to any subsequent more recent releases. Close the SUU when complete.
New Features
- MXW mic naming. Enables to assign a custom mic name to each individual mic via MXW Software from version 1.2 onwards. That mic name is retained by the mic and will be shown in MXW Software whenever the mic is linked to an MXW APT anywhere on the network.
- Custom Mic naming above also enabled via TPCI protocol
Improvements
- Removed the browser-based Web-UI
- Web-UI replaced by a simplified “Thin-UI” with simple network settings, still available via browser-based access for APT and NCS
- Added support for Thin UI lockout for ANI
- ACN protocol update to use a fixed port allocation for VPN access
Bug Fixes
- Fixed for all MXW components: Repetitive opening and closing of the TPCI port (2202), in excess of 250K cycles, causes TPCI port to no longer respond.
Known Issues
- Multiple Primary Leader Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
Notes
- Related Links
- To operate this version of MXW with other Shure networked systems, see the following list of recommended software and firmware versions:
- SCM820 1.4.3
- Shure Web Device Discovery 1.2.17
- Shure Update Utility 2.7.0
- SystemOn 4.6.0
Firmware
10.0.6
February 28, 2022
View All Updates
These release notes cover the following models:
- MXWNCS2/4/8 Networked Charging Stations
- MXWANI4/8 Audio Network Interfaces
- MXWAPT2/4/8 Access Point Transceivers
- MXW1/2/6/8 Wireless Microphones
Important
- Update any MXW devices which are below the minimum supported firmware 8.0.3 by using the Shure Update Utility (SUU) found here. Please note – should the firmware version used be older than 5.2.2, it is advised to upgrade to version 5.2.2 first before updating to any subsequent more recent releases. Close the SUU when complete.
New Features
- MXW mic naming. Enables to assign a custom mic name to each individual mic via MXW Software from version 1.2 onwards. That mic name is retained by the mic and will be shown in MXW Software whenever the mic is linked to an MXW APT anywhere on the network.
- Custom Mic naming above also enabled via TPCI protocol
Improvements
- Removed the browser-based Web-UI
- Web-UI replaced by a simplified “Thin-UI” with simple network settings, still available via browser-based access for APT and NCS
- Added support for Thin UI lockout for ANI
- ACN protocol update to use a fixed port allocation for VPN access
Bug Fixes
- Fixed for all MXW components: Repetitive opening and closing of the TPCI port (2202), in excess of 250K cycles, causes TPCI port to no longer respond.
Known Issues
- Multiple Primary Leader Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
Notes
- Related Links
- To operate this version of MXW with other Shure networked systems, see the following list of recommended software and firmware versions:
- SCM820 1.4.3
- Shure Web Device Discovery 1.2.17
- Shure Update Utility 2.7.0
- SystemOn 4.6.0
Firmware
10.0.6
February 28, 2022
View All Updates
These release notes cover the following models:
- MXWNCS2/4/8 Networked Charging Stations
- MXWANI4/8 Audio Network Interfaces
- MXWAPT2/4/8 Access Point Transceivers
- MXW1/2/6/8 Wireless Microphones
Important
- Update any MXW devices which are below the minimum supported firmware 8.0.3 by using the Shure Update Utility (SUU) found here. Please note – should the firmware version used be older than 5.2.2, it is advised to upgrade to version 5.2.2 first before updating to any subsequent more recent releases. Close the SUU when complete.
New Features
- MXW mic naming. Enables to assign a custom mic name to each individual mic via MXW Software from version 1.2 onwards. That mic name is retained by the mic and will be shown in MXW Software whenever the mic is linked to an MXW APT anywhere on the network.
- Custom Mic naming above also enabled via TPCI protocol
Improvements
- Removed the browser-based Web-UI
- Web-UI replaced by a simplified “Thin-UI” with simple network settings, still available via browser-based access for APT and NCS
- Added support for Thin UI lockout for ANI
- ACN protocol update to use a fixed port allocation for VPN access
Bug Fixes
- Fixed for all MXW components: Repetitive opening and closing of the TPCI port (2202), in excess of 250K cycles, causes TPCI port to no longer respond.
Known Issues
- Multiple Primary Leader Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
Notes
- Related Links
- To operate this version of MXW with other Shure networked systems, see the following list of recommended software and firmware versions:
- SCM820 1.4.3
- Shure Web Device Discovery 1.2.17
- Shure Update Utility 2.7.0
- SystemOn 4.6.0
Firmware
10.0.6
February 28, 2022
View All Updates
These release notes cover the following models:
- MXWNCS2/4/8 Networked Charging Stations
- MXWANI4/8 Audio Network Interfaces
- MXWAPT2/4/8 Access Point Transceivers
- MXW1/2/6/8 Wireless Microphones
Important
- Update any MXW devices which are below the minimum supported firmware 8.0.3 by using the Shure Update Utility (SUU) found here. Please note – should the firmware version used be older than 5.2.2, it is advised to upgrade to version 5.2.2 first before updating to any subsequent more recent releases. Close the SUU when complete.
New Features
- MXW mic naming. Enables to assign a custom mic name to each individual mic via MXW Software from version 1.2 onwards. That mic name is retained by the mic and will be shown in MXW Software whenever the mic is linked to an MXW APT anywhere on the network.
- Custom Mic naming above also enabled via TPCI protocol
Improvements
- Removed the browser-based Web-UI
- Web-UI replaced by a simplified “Thin-UI” with simple network settings, still available via browser-based access for APT and NCS
- Added support for Thin UI lockout for ANI
- ACN protocol update to use a fixed port allocation for VPN access
Bug Fixes
- Fixed for all MXW components: Repetitive opening and closing of the TPCI port (2202), in excess of 250K cycles, causes TPCI port to no longer respond.
Known Issues
- Multiple Primary Leader Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
Notes
- Related Links
- To operate this version of MXW with other Shure networked systems, see the following list of recommended software and firmware versions:
- SCM820 1.4.3
- Shure Web Device Discovery 1.2.17
- Shure Update Utility 2.7.0
- SystemOn 4.6.0
Firmware
10.0.6
February 28, 2022
View All Updates
These release notes cover the following models:
- MXWNCS2/4/8 Networked Charging Stations
- MXWANI4/8 Audio Network Interfaces
- MXWAPT2/4/8 Access Point Transceivers
- MXW1/2/6/8 Wireless Microphones
Important
- Update any MXW devices which are below the minimum supported firmware 8.0.3 by using the Shure Update Utility (SUU) found here. Please note – should the firmware version used be older than 5.2.2, it is advised to upgrade to version 5.2.2 first before updating to any subsequent more recent releases. Close the SUU when complete.
New Features
- MXW mic naming. Enables to assign a custom mic name to each individual mic via MXW Software from version 1.2 onwards. That mic name is retained by the mic and will be shown in MXW Software whenever the mic is linked to an MXW APT anywhere on the network.
- Custom Mic naming above also enabled via TPCI protocol
Improvements
- Removed the browser-based Web-UI
- Web-UI replaced by a simplified “Thin-UI” with simple network settings, still available via browser-based access for APT and NCS
- Added support for Thin UI lockout for ANI
- ACN protocol update to use a fixed port allocation for VPN access
Bug Fixes
- Fixed for all MXW components: Repetitive opening and closing of the TPCI port (2202), in excess of 250K cycles, causes TPCI port to no longer respond.
Known Issues
- Multiple Primary Leader Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
Notes
- Related Links
- To operate this version of MXW with other Shure networked systems, see the following list of recommended software and firmware versions:
- SCM820 1.4.3
- Shure Web Device Discovery 1.2.17
- Shure Update Utility 2.7.0
- SystemOn 4.6.0
Firmware
0.7.5
February 24, 2022
View All Updates
Improvements
- Bug fixes
Notes
- User Guide
- Firmware updates for AONIC 50 are available in the ShurePlus PLAY app for iOS and Android
Firmware
1.2.56
January 31, 2022
View All Updates
Improvements
- Improved RCAS™ (Remote Control Audio System) reliability
Known Issues
- Transmitter firmware update will fail if the transmitter Power = OFF (standby)
- Workaround: Set transmitter Power = ON before performing the firmware update
Notes
- This firmware is compatible with Q5X AquaMic™, CoachMic™, and PlayerMic®
- To install Q5X firmware on devices:
- Download Q5X 1.2.56 firmware from Shure Update Utility (user guide)
- Connect to the AD4D, AD4Q, or ADX5D receiver, and in the Hosted Tx section, select Q5XTx 1.2.56
- Send the update to the receiver
- Use IR Sync to update the transmitter firmware
- AD4D and AD4Q can only host one transmitter firmware image at a time; if you also need to update Axient Digital transmitters, please repeat the above process, but select an ADTx firmware version.
- To operate this version of Q5X AquaMic™, CoachMic™, and PlayerMic® with other Shure systems and software, see the following list of recommended versions:
- AD4D/Q 1.3.26
- ADX5D 1.3.26
- Shure Update Utility 2.6.2
- Distributed by Shure, AquaMic™, CoachMic™, and PlayerMic® and MicCommander™ are Q5X products. For support and service, please visit www.q5x.com.
Firmware
2.2.5.1
January 27, 2022
View All Updates
Improvements
- Fixed an issue that caused noise when using SIP audio
Firmware
1.0.7
January 4, 2022
View All Updates
Initial Release
Notes
- User Guide
- Firmware updates for AONIC 40 Wireless Noise Cancelling Headphones are available in the ShurePlus PLAY app for iOS and Android