Software & Firmware Archiv

Improvements

• Fixed distorted audio issue on ULXD4 devices with Dante version REV3
• Fixed issue where ULXD4 devices sometimes disappear from Wireless Workbench® and do not reconnect

Important

• ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Known Issues

• Group Scan Deployment and Custom Group Load may not work with other ULXD4/ULXD4D/ ULXD4Q that are running older firmware versions

Notes

• User Guide
• ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
  1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
  2. Align the infrared ports with the transmitter
  3. Press ENTER
• To operate this version of ULX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • ULXD1/2/6/8 Transmitters 2.7.3
  • ULXD4/4D/4Q Receivers 2.7.6
  • Axient AXT600 Spectrum Manager 2.1.41
  • SBC250/450/850 Networked Charging Stations 2.7.3
  • Shure Update Utility 2.8.0
  • ShurePlus Channels iOS 1.6.0
  • ShurePlus Channels Android 1.6.0
  • Wireless Workbench 6.15.3

Improvements

• Fixed distorted audio issue on ULXD4 devices with Dante version REV3
• Fixed issue where ULXD4 devices sometimes disappear from Wireless Workbench® and do not reconnect

Important

• ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Known Issues

• Group Scan Deployment and Custom Group Load may not work with other ULXD4/ULXD4D/ ULXD4Q that are running older firmware versions

Notes

• User Guide
• ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
  1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
  2. Align the infrared ports with the transmitter
  3. Press ENTER
• To operate this version of ULX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • ULXD1/2/6/8 Transmitters 2.7.3
  • ULXD4/4D/4Q Receivers 2.7.6
  • Axient AXT600 Spectrum Manager 2.1.41
  • SBC250/450/850 Networked Charging Stations 2.7.3
  • Shure Update Utility 2.8.0
  • ShurePlus Channels iOS 1.6.0
  • ShurePlus Channels Android 1.6.0
  • Wireless Workbench 6.15.3

Improvements

• Fixed distorted audio issue on ULXD4 devices with Dante version REV3
• Fixed issue where ULXD4 devices sometimes disappear from Wireless Workbench® and do not reconnect

Important

• ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Known Issues

• Group Scan Deployment and Custom Group Load may not work with other ULXD4/ULXD4D/ ULXD4Q that are running older firmware versions

Notes

• User Guide
• ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
  1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
  2. Align the infrared ports with the transmitter
  3. Press ENTER
• To operate this version of ULX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • ULXD1/2/6/8 Transmitters 2.7.3
  • ULXD4/4D/4Q Receivers 2.7.6
  • Axient AXT600 Spectrum Manager 2.1.41
  • SBC250/450/850 Networked Charging Stations 2.7.3
  • Shure Update Utility 2.8.0
  • ShurePlus Channels iOS 1.6.0
  • ShurePlus Channels Android 1.6.0
  • Wireless Workbench 6.15.3

Improvements

• Fixed distorted audio issue on ULXD4 devices with Dante version REV3
• Fixed issue where ULXD4 devices sometimes disappear from Wireless Workbench® and do not reconnect

Important

• ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Known Issues

• Group Scan Deployment and Custom Group Load may not work with other ULXD4/ULXD4D/ ULXD4Q that are running older firmware versions

Notes

• User Guide
• ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
  1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
  2. Align the infrared ports with the transmitter
  3. Press ENTER
• To operate this version of ULX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • ULXD1/2/6/8 Transmitters 2.7.3
  • ULXD4/4D/4Q Receivers 2.7.6
  • Axient AXT600 Spectrum Manager 2.1.41
  • SBC250/450/850 Networked Charging Stations 2.7.3
  • Shure Update Utility 2.8.0
  • ShurePlus Channels iOS 1.6.0
  • ShurePlus Channels Android 1.6.0
  • Wireless Workbench 6.15.3

Improvements

• Fixed distorted audio issue on ULXD4 devices with Dante version REV3
• Fixed issue where ULXD4 devices sometimes disappear from Wireless Workbench® and do not reconnect

Important

• ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Known Issues

• Group Scan Deployment and Custom Group Load may not work with other ULXD4/ULXD4D/ ULXD4Q that are running older firmware versions

Notes

• User Guide
• ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
  1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
  2. Align the infrared ports with the transmitter
  3. Press ENTER
• To operate this version of ULX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • ULXD1/2/6/8 Transmitters 2.7.3
  • ULXD4/4D/4Q Receivers 2.7.6
  • Axient AXT600 Spectrum Manager 2.1.41
  • SBC250/450/850 Networked Charging Stations 2.7.3
  • Shure Update Utility 2.8.0
  • ShurePlus Channels iOS 1.6.0
  • ShurePlus Channels Android 1.6.0
  • Wireless Workbench 6.15.3

Improvements

• Fixed distorted audio issue on ULXD4 devices with Dante version REV3
• Fixed issue where ULXD4 devices sometimes disappear from Wireless Workbench® and do not reconnect

Important

• ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Known Issues

• Group Scan Deployment and Custom Group Load may not work with other ULXD4/ULXD4D/ ULXD4Q that are running older firmware versions

Notes

• User Guide
• ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
  1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
  2. Align the infrared ports with the transmitter
  3. Press ENTER
• To operate this version of ULX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • ULXD1/2/6/8 Transmitters 2.7.3
  • ULXD4/4D/4Q Receivers 2.7.6
  • Axient AXT600 Spectrum Manager 2.1.41
  • SBC250/450/850 Networked Charging Stations 2.7.3
  • Shure Update Utility 2.8.0
  • ShurePlus Channels iOS 1.6.0
  • ShurePlus Channels Android 1.6.0
  • Wireless Workbench 6.15.3

New Features

• Added the option to control analog output attenuation level for ADX5D

Improvements

• Updated in-app feedback form (available in Settings > Help > Send Feedback)
• Improved hardware support
• Performance improvements

Bug Fixes

• Fixed an issue where in some scenarios for Axient Digital receivers, the transmitter device ID does not dynamically update when edited, creating a mismatch between ShurePlus Channels and the Axient Digital receivers
• Fixed an issue where in some scenarios, ShurePlus Channels looks like it freezes for a few seconds while in the detailed view of a Shure ADX5D

Known Issues 

• The transmitter count on the Transmitters tab is not updated dynamically in channels details view on AXT400 devices
  • Workaround: The transmitter count in the on-screen navigation is updated
• ADX5D takes a few seconds longer to discover than other networked Shure devices

Notes 

• User Guide 
• Please report problems and submit general feedback through the app:
  • Settings > Help > Send Feedback
• For the best results, ensure your connected devices are updated to the latest firmware using the Shure Update Utility desktop app.
• We recommend using devices and WiFi access points that support WiFi 6 or later.
• In order to view the SSID of your network connection type or SSID in the network status bar, you must permit the app access to your location. To do so, go to the Settings app on your iPhone or tablet, select Privacy > Location Services > Channels, and choose “While Using the App”.

Compatibility

• Compatible with iPhone, iPad, and iPod touch devices running iOS 14 or later. We can’t ensure compatibility or full-feature functionality with older operating systems.
• To operate this version of ShurePlus Channels with other Shure products, reference the following list of recommended versions:
  • Axient Digital 1.4.7
  • AD600 1.0.39
  • Axient 2.1.41
  • PSM1000 1.7.10
  • QLX-D 2.6.2
  • SLX-D 1.1.2
  • UHF-R 1.171
  • ULX-D 2.7.3
  • SBC220/240 Two-bay Chargers 1.4.7
  • SBC250/450/850 Networked Charging Stations 2.7.3
  • SBRC Shure Battery Rack Charger 1.1.6
  • Shure Update Utility 2.8.0
  • Wireless Workbench 6.15.3

New Features

• Added the option to control analog output attenuation level for ADX5D

Improvements

• Updated in-app feedback form (available in Settings > Help > Send Feedback)
• Improved hardware support
• Performance improvements

Bug Fixes

• Resolved an issue where the “EXT” or “EXTERNAL” text is not displayed in the list view when an external power source is connected to ULXD6 or ULXD8 transmitter
• Resolved an issue on certain Pixel phones where device channels do not come back online when the network disconnects and reconnects

Known Issues

• ADX5D takes a few seconds longer to discover than other networked Shure device
• In certain cases, the "New Frequency" option is not displayed dynamically on the Frequency picker when Quad mode is enabled or disabled
  • Workaround: Refresh or close and relaunch the application
• In certain cases, when scrolling the Inventory during multiple channel or device identify, items may not load completely, and users may be unable to navigate to the detailed view
• ULXD4Q receivers’ audio LED in the application does not match the hardware’s front panel LEDs during audio summing overloads
• Axient and Axient Digital devices managed by an AXT600 with no new frequencies available will show an enabled “New Frequency” button when the button should be disabled
• On certain Android phones running Android 12, the wired ethernet connection is sometimes not detected automatically, if being used
  • Workaround: Reinsert the ethernet adapter, then close and relaunch the application, or simply disable the Wi-Fi
• On Samsung Note 20 and S20 Ultra phones, sometimes the channels in the list view do not appear
  • Workaround: Close and relaunch the application

Notes 

• User Guide 
• Please report problems and submit general feedback through the app
  • Settings > Help > Send Feedback
• For the best results, ensure your connected devices are updated to the latest firmware using the Shure Update Utility desktop app.
• We recommend using devices and WiFi access points that support WiFi 6 or later.
• Wired Ethernet connection has been tested with the following adapters:  
  • UGREEN Ethernet Adapter USB 2.0 to 10/100 Network RJ45 LAN Wired Adapter
  • INSIGNIA USB 3.0 to Gigabit Ethernet Adapter
  • Nonda USB-A to USB-C Adapter 
• In order to view the SSID of your network connection type or SSID in the network status bar, you must permit the app access to your location. To do so, go to the Settings app on your Android Phone select Location > App Permissions > Channels, and choose “Allow Only While Using the App”.

Compatibility

• Compatible with Android 10 or later. We can’t ensure compatibility or full-feature functionality with older operating systems. 
• Compatible with most Android phones from Samsung, Google, OnePlus, Motorola, and more.
• To operate this version of ShurePlus Channels with other Shure products, reference the following list of recommended versions: 
  • Axient Digital 1.4.7
  • AD600 1.0.39
  • Axient 2.1.41
  • PSM1000 1.7.10
  • QLX-D 2.6.2
  • SLX-D 1.1.2
  • UHF-R 1.171
  • ULX-D 2.7.3
  • SBC220/240 Two-bay Chargers 1.4.7
  • SBC250/450/850 Networked Charging Stations 2.7.3
  • SBRC Shure Battery Rack Charger 1.1.6
  • Shure Update Utility 2.8.0
  • Wireless Workbench 6.15.3

Improvements

• Corrected an issue with the Send Feedback feature (available in Help > Send Feedback)

Known Issues

• In some cases, SUU fails to launch after installation on macOS Ventura.
  • Workaround: Navigate to System Settings -> Privacy and Security, scroll down to SUU notification, click on Open Anyway, and enter the password.
• Shure Update Utility will fail to discover on first connection an ADX5D on Apple Silicon Macs running Big Sur.
  • Workaround: Restart your Mac computer and ADX5D will successfully be discovered.
• ULX-D devices running versions prior to 1.4.8 must be updated to 1.4.8 first before updating to 2.0.28. After 2.0.28 is installed, ULX-D devices can be updated to the latest available firmware version.  See ULX-D Firmware Update and Issues
• ULX-D devices that are downgrading to 1.5.6 may report a false failure.
  • Workaround: Because this is a false failure, closing the send updates window and going to the main page, Shure Update Utility will show green for the firmware version.
• Microflex Wireless devices running versions prior to 5.2.2 must be updated to 5.2.2 first before updating to a later firmware version.
• Shure Update Utility may have unexpected behavior if the firmware files are in a directory location that contains Unicode characters.
• In certain scenarios, the Shure Update Utility process is not terminated immediately on a Windows machine if you close the window while an update is in progress.

Important

• In most cases, you should install the latest version of Shure Update Utility to update your devices. However, certain legacy devices require older versions of SUU:
  • Use Shure Update Utility 2.4.8 to update firmware on UHF-R, SHA900, KSE1500, and GLX-D systems or for 32-bit support.
  • Use Shure Update Utility 2.4.1 to update firmware on PSM1000 systems running firmware 1.1.0 or earlier.
  • Use the MXC Firmware installer to update MXC products, including DIS-CCU.
  • Use the DFR22 Software and a PC running Windows 8.1 or earlier to update a DFR22.
• Update MOTIV and AONIC devices with their mobile or desktop apps.
• Note: Installing SUU 2.4.8 or SUU 2.4.1 will replace the most recent version of SUU on your machine.

Notes

• User Guide

Compatibility

• Windows
  • Windows 10, Intel Only
  • Windows 11, Intel Only
• macOS
  • macOS 11 (Big Sur), Intel and Apple Silicon
  • macOS 12 (Monterey), Intel and Apple Silicon
  • macOS 13 (Ventura), Intel and Apple Silicon
  • Note: SUU 2.7.1 was the last release to support macOS 10.15 (Catalina)

Initial Release

Notes

• User Guides: GLXD4+ | GLXD4R+ | GLXD6+
• To operate this version of GLXD+ with other Shure systems and software, see the following list of recommended versions:
  • GLXD4/4R/6+ Receivers 2.0.17
  • Shure Update Utility 2.8.1