ファームウェア
SBC250/450/850 - ネットワーク充電ステーション
バージョン
掲載日
ダウンロード
2.8.6
2023年12月12日
Notes
- User Guides: SBC250 | SBC450/850
- To set up ULXD6/8 transmitters to receive firmware updates while docked in SBC250/450/850 Networked Charging Stations, follow these steps:
- Place transmitters on a charging station and ensure the charging station is connected to the network.
- Launch Shure Update Utility to find firmware updates.
- Download updates and select Send Updates.
- To operate this version of SBC250/450/850 with other Shure networked systems and software, see the following list of recommended versions:
- ULX-D 2.8.6
- Shure Update Utility 2.8.3
- Wireless Workbench 6.15.4 or 7.0.0
2.7.3
2022年10月4日
Notes
- SBC250 User Guide
- SBC450/850 User Guide
- To set up ULXD6/8 transmitters to receive firmware updates while docked in SBC250/450/850 Networked Charging Stations, follow these steps:
- Place transmitters on a charging station and ensure the charging station is connected to the network.
- Launch Shure Update Utility to find firmware updates.
- Download updates and select Send Updates.
- To operate this version of SBC250/450/850 with other Shure networked systems and software, see the following list of recommended versions:
- ULX-D ULXD6/8 Transmitters and ULXD4/4D/4Q Receivers 2.7.3
- Shure Update Utility 2.7.2
- Wireless Workbench 6.15.0
2.6.3
2022年5月24日
Notes
- SBC250 User Guide
- SBC450/850 User Guide
- To set up ULXD6/8 transmitters to receive firmware updates while docked in SBC250/450/850 Networked Charging Stations, follow these steps:
- Place transmitters on a charging station and ensure the charging station is connected to the network.
- Launch Shure Update Utility to find firmware updates.
- Download updates and select Send Updates.
- To operate this version of SBC250/450/850 with other Shure networked systems and software, see the following list of recommended versions:
- ULX-D ULXD6/8 Transmitters and ULXD4/4D/4Q Receivers 2.6.3
- Wireless Workbench 6.15.0
- Shure Update Utility 2.7.1
2.5.0
2021年7月1日
Improvements
- NEW TCPI command for SBC250/SBC450/SBC850:
- FW_VER - Firmware version of docked microphone
Notes
- SBC250 User Guide
- SBC450/850 User Guide
- To set up ULXD6/8 transmitters to receive firmware updates while docked in SBC250/450/850 Networked Charging Stations, follow these steps:
- Place transmitters on a charging station and ensure the charging station is connected to the network.
- Launch Shure Update Utility to find firmware updates.
- Download updates and select Send Updates.
- To operate SBC250/450/850 version 2.5.0 with other Shure networked systems and software, see the following list of minimum versions:
- ULX-D ULXD6/8 Transmitters and ULXD4/4D/4Q Receivers 2.5.0
- QLX-D QLXD4 Receivers 2.3.24
- Wireless Workbench 6.14.1
- Shure Update Utility 2.6.1
- ShurePlus Channels 1.4.6
2.4.13
2020年10月16日
改善点
- Shureコントロールアプリケーションのネットワーク管理機能を改善
既知の問題点
- SBC250/450/850デバイスはSystemOn 2.0~3.0.1に対応していません。
注記
- SBC250ユーザーガイド
- SBC450/850ユーザーガイド
- SBC250/450/850ネットワーク充電ステーションにドッキング中にファームウェアを受信できるようにULXD6/8送信機をセットアップするには、以下の手順に従います。
- 送信機を充電ステーションにドッキングし、充電ステーションがネットワークに接続されていることを確認します。
- Shureアップデートユーティリティを起動してファームウェアアップデートを検索します。
- アップデートをダウンロードし、[Send Updates]をクリックします。
- バージョン2.4.13のSBC250/450/850デバイスを他のShureネットワークシステム/ソフトウェアと運用する場合、以下のバージョン以降が必要です。
- ULX-D ULXD6/8送信機およびULXD4/4D/4Q受信機2.4.9
- QLX-D QLXD4受信機2.3.22
- Wireless Workbench 6.13.3
- Shureアップデートユーティリティ(SUU) 2.4.8
- ShurePlus Channels 1.4.2
2.4.9
2019年11月11日
Improvement
- Changed version number to allow all ULX-D devices in a configuration to have the same firmware version.
Known Issue
- SBC250/450/850 devices are not compatible with SystemOn 2.0-3.0.1
Notes
- SBC250 User Guide
- SBC450/850 User Guide
- To set up ULXD6/8 transmitters to receive firmware updates while docked in SBC250/450/850 Networked Charging Stations, follow these steps:
- Place transmitters on a charging station and ensure the charging station is connected to the network.
- Launch Shure Update Utility to find firmware updates.
- Download updates and select Send Updates.
- To operate SBC250/450/850 version 2.4.9 with other Shure networked systems and software, see the following list of minimum versions:
- ULX-D ULXD6/8 Transmitters and ULXD4/4D/4Q Receivers 2.4.9
- QLX-D QLXD4 Receivers 2.3.8
- Wireless Workbench 6.13.1
- Shure Update Utility 2.4.6
- ShurePlus Channels 1.4.2
2.3.6
2018年12月5日
重要
- バージョン2.3.4以降にアップデートしたSBC250/450/850充電ステーションは、
バージョン2.2.24以前にダウングレードできません。 - SBC250充電ステーションと併用するには、ULX-D受信機はバージョン2.2.24以降、
QLXD4受信機はバージョン2.2.11以降でなければなりません。 - SBC450/850充電ステーションと併用するには、ULX-D受信機はバージョン2.1.6以降、
QLXD4受信機はバージョン2.1.5以降でなければなりません。
改善点
- 最新のハードウェア補正との互換性を解決
既知の問題点
- SBC250/450/850デバイスはSystemOn 2.0~3.0.1に対応していません。
注記
- SBC450/850ユーザーガイド
- SBC250/450/850ネットワーク充電ステーションにドッキング中に
ファームウェアアップデートを受信できるようにULXD6/8送信機をセットアップするには、以下の手順に従います。- 送信機を充電ステーションにドッキングし、充電ステーションがネットワークに接続されていることを確認します。
- Shureアップデートユーティリティを起動してファームウェアアップデートを検索します。
- アップデートをダウンロードし、[Send Updates]をクリックします。
- バージョン2.3.6のSBC250/450/850デバイスを他のShureシステム/ソフトウェアと運用する場合、
以下のバージョン以降が必要です。- ULX-D ULXD6/8 送信機 および ULXD4/4D/4Q 受信機 2.3.4
- QLX-D QLXD4受信機 2.2.11
- Wireless Workbench 6.12.6
- Shureアップデートユーティリティ2.4.3
- ShurePlus Channels 1.4.2
2.3.4
2018年11月7日
Important
- ULX-D receivers must be on version 2.2.24 or higher and QLXD4 receivers on version 2.2.11 or higher in order to be used with SBC250 charging stations.
- ULX-D receivers must be on version 2.1.6 or higher and QLXD4 receivers on version 2.1.5 or higher in order to be used with SBC450/850 charging stations.
Improvement
- Changed version number to allow all ULX-D devices in a configuration to have the same firmware version.
Known Issue
- SBC250/450/850 devices are not compatible with SystemOn 2.0-3.0.1
Notes
- SBC450/850 User Guide
- To set up ULXD6/8 transmitters to receive firmware updates while docked in SBC250/450/850 Networked Charging Stations, follow these steps:
- Place transmitters on a charging station and ensure the charging station is connected to the network.
- Launch Shure Update Utility to find firmware updates.
- Download updates and select Send Updates.
- To operate SBC250/450/850 version 2.3.4 with other Shure networked systems and software, see the following list of minimum versions:
- ULX-D ULXD6/8 Transmitters and ULXD4/4D/4Q Receivers 2.3.4
- QLX-D QLXD4 Receivers 2.2.11
- Wireless Workbench 6.12.6
- Shure Update Utility 2.4.3
- ShurePlus Channels 1.4.2
2.2.24
2018年6月14日
Important
- ULX-D receivers must be on version 2.2.24 and QLXD4 receivers on version 2.2.11 in order to be used with SBC250 charging stations.
- ULX-D receivers must be on version 2.1.6 or higher and QLXD4 receivers on version 2.15 or higher in order to be used with SBC450/850 charging stations.
Improvement
- Version number change to allow all SBC250/450/850 charging stations in a configuration with ULX-D transmitters to have the same firmware version.
Known Issue
- SBC250/450/850 devices are not compatible with SystemOn 2.0-3.0.1
Notes
- SBC450/850 User Guide
- To set up ULXD6/8 transmitters to receive firmware updates while docked in SBC250/450/850 Networked Charging Stations, follow these steps:
- Place transmitters on a charging station and ensure the charging station is connected to the network.
- Launch Shure Update Utility to find firmware updates.
- Download updates and select Send Updates.
- To operate SBC250/450/850 version 2.2.24 with other Shure networked systems and software, see the following list of minimum versions:
- ULX-D ULXD6/8 Transmitters and ULXD4/4D/4Q Receivers 2.2.X
- QLX-D QLXD4 Receivers 2.2.11
- Wireless Workbench 6.12.4
- Shure Update Utility 2.4.2
- ShurePlus Channels 1.4.1
2.2.23
2018年5月22日
Important
- ULX-D or QLX-D receivers used with SBC250/450/850 charging stations must be updated to the following minimum firmware versions:
- ULXD4, ULXD4D, and ULXD4Q Receivers 2.2.X
- QLXD4 Receivers 2.2.11
New Feature
- Initial firmware for SBC250 Networked Charging Station
Improvements
- Bug fixes
Known Issue
- SBC250/450/850 devices are not compatible with SystemOn 2.0-3.0.1
Notes
- SBC450/850 User Guide
- To set up ULXD6/8 transmitters to receive firmware updates while docked in SBC250/450/850 Networked Charging Stations, follow these steps:
- Place transmitters on a charging station and ensure the charging station is connected to the network.
- Launch Shure Update Utility to find firmware updates.
- Download updates and select Send Updates.
- To operate SBC250/450/850 version 2.2.23 with other Shure networked systems and software, see the following list of minimum versions:
- ULX-D ULXD6/8 Transmitters and ULXD4/4D/4Q Receivers 2.2.X
- QLX-D QLXD4 Receivers 2.2.11
- Wireless Workbench 6.12.4
- Shure Update Utility 2.4.2
- ShurePlus Channels 1.4.1
2.1.16
2017年5月19日
Important
- ULX-D or QLX-D receivers used with SBC450/850 charging stations version 2.1.6 must be updated to the following minimum firmware versions:
- ULXD4, ULXD4D, and ULXD4Q Receivers 2.1.16 or higher
- QLXD4 Receivers 2.1.5 or higher
New Feature
Known Issue
- SBC450/850 version 2.1.16 Networked Charging Stations are not compatible with SystemOn 2.1
Notes
- SBC450/850 User Guide
- ULXD6/8 transmitters can receive firmware updates while docked in an SBC450 or SBC850 Networked Charging Station.
- Place transmitters on charging station and ensure charging station is connected to the network.
- Launch Shure Update Utility to find firmware updates.
- Download updates and click Send Updates.
- To operate SBC450/850 version 2.1.16 devices with other Shure networked systems and software, see the following list of minimum versions:
- ULX-D ULXD6/8 Transmitters and ULXD4, ULXD4D, ULXD4Q Receivers 2.1.16
- Wireless Workbench 6.12.2
- Shure Update Utility 2.4
- ShurePlus Channels 1.3.1