
De nombreuses personnes ont demandé à Shure des recommandations sur les meilleures façons de nettoyer et de désinfecter nos produits. Veuillez noter que Shure ne peut donner d’avis sur les méthodes de désinfection efficaces contre le virus Covid-19. Toute question de ce type doit être adressée aux experts compétents en matière de santé et de prévention.Les informations figurant sur ce site constituent uniquement des informations générales sur les méthodes de nettoyage des microphones.Veuillez noter que les observations ci-dessous n’impliquent aucune garantie contre les dommages causés au produit, mais sont basées sur les meilleures informations dont nous disposons à ce jour.
Conseils de nettoyage : les choses à ne pas faire
Pour commencer, concentrons-nous sur les choses à ne pas faire. Il faut plus de temps pour tester diverses substances, afin de déterminer si elles causent des dommages sur la durée, que pour déterminer ce que nous savons absolument qu'il faut éviter. Pendant que nous poursuivons nos tests, voici quelques éléments généraux à garder à l'esprit :
Eau de Javel
Pas de produit nettoyant à base d’eau de javel
Eau oxygénée
Pas d'eau oxygénée
Désinfectants pour les mains
N’utilisez pas de désinfectant pour les mains pour nettoyer les produits Shure
Outils abrasifs
Pas d’outil de nettoyage abrasif (par ex. brosse à récurer ou tampon abrasif)
Liquides
Ne mouillez pas excessivement les produits avec un liquide
Alcool nettoyant
Pas d’alcool nettoyant (alcool isopropylique) sur les pièces en plastique transparent
Retirer la grille et le filtre anti-pop en mousse
Retirer la grille et le filtre anti-pop en mousse avant le nettoyage. Ne pas nettoyer les parties internes.
How to Clean the Handle
Be sure to power down the transmitter and remove the battery before cleaning.
Re-attach the battery cover onto the handle. This will help minimize the exposure of the battery contacts to cleaning agents and prevent corrosion.
For now, leave the grille and windscreen on to protect the microphone element from accidental exposure to moisture and cleaning agents.
Use only a soft cloth and a minimal amount of cleaner - do not saturate the product.
We have tested the following cleaning agents:
- Mild soapy water (such as liquid dish soap), which is then removed with a clean, damp cloth.
- Clorox® Disinfecting Wipes
- Lysol® Disinfectant Spray
- NOTE: not recommended for nickel handhelds
- Isopropyl alcohol
- NOTE: may remove some of the paint from the handle and impact the aesthetics of the microphone. Though this should not affect the performance of the microphone, if this is important to you, test on an inconspicuous area first.
- When cleaning, avoid getting any moisture on the microphone element itself. Do not apply cleaning agents to the microphone capsule directly. If possible, hold the microphone upright so that any excess liquid will flow away from the microphone element.
- Avoid the display bezel, as well as any buttons, switches, or seams while cleaning.
- Once the cleaning of the external surface is complete, pat dry with a soft cloth.
- Unscrew the battery cover to remove and inspect the battery area for any damp spots, and pat dry. Set aside the sleeve to allow the battery compartment to dry fully.
- Unscrew the wireless capsule from the handle to inspect for and dry any damp areas.
- We do not recommend cleaning the inside of the battery compartment. In consideration of providing a clean microphone for others to use, consider washing hands or using gloves to access the battery compartment and insert batteries. Then wash hands before re-attaching the sleeve. This will result in a clean external surface for the talent.
- Be sure to allow the surface of the microphone to dry fully before use.
How to Clean the Grille
- We recommend keeping an inventory of spares instead of cleaning the grille and windscreen whenever possible. If you have spares, there will always be a clean replacement ready to swap in while the other gets cleaned and dries out.Carefully unscrew the grille from the microphone.
- Remove the foam windscreen pop-filter inside the grille (note that the windscreen may be glued in place. If the pop filter does not come out with gentle pulling, we recommend cleaning the entire grille with the pop filter in place).
- Using a soft-bristled toothbrush, clean the grille with water or Isopropyl alcohol. If the internal pop filter is removable, the grille can alternatively be cleaned with mild soapy water. Suds tend to collect in the windscreen, which may affect the performance of the microphone, so this method is not recommended for filters that cannot be separated from the grille.
- Rinse the foam windscreen pop filter with water or Isopropyl alcohol only (NOTE: this applies only to removable foam windscreen pop filters inside the grille; see the next step for cleaning external windscreens.
- Only warm water or hydrogen peroxide should be used to clean external foam windscreens. Since they tend to act like a sponge, soap, or liquid detergents will be impossible to rinse fully. Isopropyl alcohol and Lysol disinfectant spray will cause color to leech from the windscreen. Clean replacements are the best solution!
- Remove excess water from the grille and windscreen and allow them to dry fully before reinstalling on the microphone
Note: If the microphone output seems low or quieter than normal, it’s possible the microphone element got wet and hasn’t fully dried yet. Unplug the microphone and allow it to dry out completely before using it.



