Firmware

ULXD1/2 - 900 MHz ISM Wireless Transmitter

Versions

Date Posted

Descargar

2.8.6
12/12/2023

Improvements

  • Support for added hardware revisions

Notes

  • User Guide
  • Information about the hardware revision is displayed in the UTILITY > VERSION menu
  • To operate this version of ULX-D devices with other Shure networked systems and software, see the following list of recommended versions:
    • ULXD 2.8.6
    • Axient AXT600 Spectrum Manager 2.1.41
    • Shure Update Utility 2.8.3
    • ShurePlus Channels iOS 1.6.1
    • ShurePlus Channels Android 1.6.2
    • Wireless Workbench 6.15.4 or 7.0.0
2.7.3
4/10/2022

Improvements

  • Support for added hardware revisions

Notes

  • User Guide
  • Information about the hardware revision is displayed in the UTILITY > VERSION menu
  • To operate this version of ULX-D devices with other Shure networked systems and software, see the following list of recommended versions:
    • ULX-D ULXD4/4D/4Q Receivers 2.7.3
    • Axient AXT600 Spectrum Manager 2.1.41
    • Shure Update Utility 2.7.2
    • ShurePlus Channels iOS 1.5.2
    • ShurePlus Channels Android 1.1.1
    • Wireless Workbench 6.15.0
2.6.3
24/05/2022

Improvements

  • Information about the hardware revision is displayed in the UTILITY > VERSION menu

Bug Fixes

  • Temperature information is reported accurately across Shure ULX-D hardware and Shure software

Notes

  • User Guide
  • To operate this version of ULX-D devices with other Shure networked systems and software, see the following list of recommended versions:
    • ULX-D ULXD4/4D/4Q Receivers 2.6.3
    • Axient AXT600 Spectrum Manager 2.1.38
    • Wireless Workbench 6.15.0
    • ShurePlus Channels iOS 1.5.2
    • ShurePlus Channels Android 1.1.1
    • Shure Update Utility 2.7.1
2.5.0
1/07/2021

Notes

  • User Guide
  • To operate ULX-D version 2.5.0 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD4/4D/4Q Receivers 2.5.0
    • QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.3.24
    • Axient AXT600 Spectrum Manager 2.1.38
    • Wireless Workbench 6.14.1
    • Shure Update Utility 2.6.1
    • ShurePlus Channels 1.4.6
2.4.25
17/02/2021

Improvements

  • Add support for China 470 MHz – 510 MHz frequency band (G53)

Notes

  • User Guide
  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    • Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    • Align the infrared ports with the transmitter
    • Press ENTER
  • To operate ULX-D version 2.4.25 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD4/4D/4Q Receivers 2.4.25
    • QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.3.24
    • Axient AXT600 Spectrum Manager 2.1.31
    • Wireless Workbench 6.14.0
    • Shure Update Utility 2.5.1
    • ShurePlus Channels 1.4.5
2.4.9
11/11/2019

Improvements

  • Support for additional RF bands:
    • Thailand: 694 – 703 MHz frequency band (M19)
    • Thailand: 748 – 758 MHz frequency band (Q12)
  • Improved user interface interactions for transmitter power level
  • Improved battery runtime accuracy for 900 MHz ISM bands
  • Bug fixes

Notes

  • User Guide
  • To operate ULX-D version 2.4.9 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD4/4D/4Q Receivers 2.4.9
    • QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.3.8
    • Axient AXT600 Spectrum Manager 2.1.22
    • Wireless Workbench 6.13.1
    • Shure Update Utility 2.4.6
    • ShurePlus Channels 1.4.2
2.3.34
10/05/2019

Important

  • New hardware revisions with the ULX-D 2.3.34 firmware version cannot be downgraded to previous firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvement

  • Added support for new hardware revisions.

Notes

  • User Guide
  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER
  • To operate ULX-D version 2.3.34 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD4/4D/4Q Receivers 2.3.34
    • QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.3.8
    • Axient AXT600 Spectrum Manager 2.1.22
    • Wireless Workbench  6.12.6
    • Shure Update Utility 2.4.4
    • ShurePlus Channels 1.4.2
2.3.21
28/02/2019

Important

  • ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvement

  • Support for Thailand 174 – 210 MHz frequency band (V52)

Known Issues

  • New hardware revisions of ULX-D version 2.3.21 are not compatible with SystemOn 2.0-3.0.1.
  • ULX-D devices on J50A or L50A frequency bands are not compatible with SystemOn 2.0-3.0.1.

Notes

  • User Guide
  • If your ULXD1/2 transmitter is on version 2.2.23, updating to version 2.2.24 will unexpectedly reset your ULXD1 to its factory default settings and your previous settings will need to be recovered via IR sync.
  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER
  • To operate ULX-D version 2.3.21 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD4/4D/4Q Receivers 2.3.21
    • QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.2.11
    • Axient AXT600 Spectrum Manager 2.1.22
    • Wireless Workbench  6.12.6
    • Shure Update Utility 2.4.3
    • ShurePlus Channels 1.4.2
2.3.4
7/11/2018

Important

  • ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvement

  • Changed version number to allow all ULX-D devices in a configuration to have the same firmware version.

Known Issues

  • New hardware revisions of ULX-D version 2.3.4 are not compatible with SystemOn 2.0-3.0.1.
  • ULX-D devices on J50A or L50A frequency bands are not compatible with SystemOn 2.0-3.0.1.

Notes

  • User Guide
  • If your ULXD1/2 transmitter is on version 2.2.23, updating to version 2.2.24 will unexpectedly reset your ULXD1 to its factory default settings and your previous settings will need to be recovered via IR sync.
  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER
  • To operate ULX-D version 2.3.4 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD4/4D/4Q Receivers 2.3.4
    • QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.2.11
    • Axient AXT600 Spectrum Manager 2.1.22
    • Wireless Workbench  6.12.6
    • Shure Update Utility 2.4.3
    • ShurePlus Channels 1.4.2
2.2.24
14/06/2018

Important

  • ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

  • Support for new frequency bands:
    • U.S. 572 – 616 MHz (J50A)
    • U.S. 653 – 663 MHz (L50A)
  • Bug fixes, including fixing the issue of ULXD1/2 transmitters on version 2.2.23 getting reset to factory default settings after an update or downgrade.

Known Issue

  • ULX-D devices on J50A or L50A frequency bands are not compatible with SystemOn 2.0-3.0.1

Notes

  • User Guide
  • If your ULXD1/2 transmitter is on version 2.2.23, updating to version 2.2.24 will unexpectedly reset your ULXD1 to its factory default settings and your previous settings will need to be recovered via IR sync.
  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER
  • SystemOn 3.0.1 displays "Check system requirements, your current firmware version may not be confirmed compatible" for ULX-D version 2.2.24; however only ULX-D devices on J50A or L50A frequency bands are not compatible with SystemOn 3.0.1.
  • To operate ULX-D version 2.2.24 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD4/4D/4Q Receivers 2.2.24
    • QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.2.11
    • Axient AXT600 Spectrum Manager 2.1.11
    • Wireless Workbench  6.12.4
    • Shure Update Utility 2.4.2
    • ShurePlus Channels 1.4.1
    • SystemOn 3.0.1
2.1.16
19/05/2017

Important

  • ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

  • Compatibility with new products:
    • ULXD6 Wireless Boundary Microphone Transmitter
    • ULXD8 Wireless Gooseneck Base Transmitter
    • SBC450 4-Bay Networked Charging Station
    • SBC850 8-Bay Networked Charging Station
  • New TPCI commands for charging stations, receivers, and transmitters
  • Bug fixes
    • Custom groups for AB/JB bands now correctly transfer via IR sync
    • Antenna power alert will persist until it is cleared
    • Fixed a sporadic issue of transmitter firmware updates failing

Known Issue

  • ULX-D version 2.1.16 is not compatible with SystemOn 2.1

Notes

  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER
  • To operate ULX-D devices on version 2.1.16 with other Shure networked systems and software, see the following list of minimum software versions:
2.0.28
2/03/2017

Important

  • ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

  • Improved large-scale network stability: In some cases of very large installations with earlier firmware versions, units occasionally would drop off the network and not be visible via WWB6 or other remote networking access. Version 2.0.28 resolves the issue and increases overall network stability.
  • Added new frequency bands:
    • Europe: Z17: 1492 – 1525 MHz
    • Europe: Z18: 1785 – 1805 MHz
    • Australia: Z19: 1785 – 1800 MHz
    • Taiwan
      • Z20: 1790 – 1805 MHz
      • G62: 510 – 530 MHz
  • Bug fixes

Notes

  • Update all transmitters used with receivers via IR. After the receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER.
  • For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 2.0.28:
  • ULX-D 2.0.19 (release date: 9/16/2016) is no longer available in the firmware library. Release notes remain available for reference:
    • New Features
      • Support for Access Control, which allows users to specify PINs for networked devices to restrict access to them from unauthenticated Shure control software.
      • AMX/Crestron control string to get the ULXD firmware version.
        • Command: < GET FW_VER >
      • Ability to reverse polarity on ULXD1 and ULXD1LEMO3 bodypacks. To reverse polarity, use these options:
        • Bodypack Utilities menu: UTILITY > POLARITY
        • Save the IR preset on the receiver and then IR sync to the bodypack to incorporate the polarity change: IR PRESETS > BP POLARITY
    • Improvements
      • Added new VHF frequency bands:
        • V50
        • V51
      • Dante™ update to software version 3.9.6.1 and firmware version 4.0.0.6
      • Improved audio stability in marginal RF conditions
    • Known Issues
      • ShurePlus Channels version 1.2 does not support ULX-D firmware version 2.0 or later.
      • QLX-D firmware version 1.1.15 or earlier does not support ULX-D firmware version 2.0 or later.
    • Notes
      • Users must update all transmitters used with receivers via IR. After the receiver is updated, follow these steps:
        1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
        2. Align the infrared ports with the transmitter
        3. Press ENTER.
      • For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 2.0.19:
        • ULX-D ULXD1/2 Transmitters and ULXD4, ULXD4D, ULXD4Q Receivers 2.0.19
        • Wireless Workbench 6.12
        • Shure Update Utility 2.2.2.8
1.7.34
10/12/2015

Improvement

  • Added new frequency band Z16 (1240 – 1260 MHz) for Japan

Notes

  • Fixed bug relating to encryption mismatch conditions.
  • Fixed IR LED behavior when firmware updating transmitters.
  • Transmitters to be used with receivers must be updated via IR. After the receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER.
  • For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.7.34:
    • QLX-D receiver 1.0.15
1.6.11
20/10/2015

New Feature

  • ULXD4, ULXD4D, and ULXD4Q receivers can now power two UA864 antennas in parallel per receiver input for a total of four antennas. To view an example of a similar setup, with different antennas, see the FAQ: Antenna Distribution – 2 Rooms, 4 Antennas, which also includes information on how to modify the UA221 passive antenna accessory.

Notes

  • Transmitters to be used with receivers must be updated via IR. After the receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER.
  • For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.6.11:
    • QLX-D receiver 1.0.15
1.6.10
10/08/2015

Improvements

  • Added new frequency bands:
    • Americas (except Brazil): X52: 902-928 MHz
    • Brazil: X53: 902-907.5, 915-928 MHz
    • Australia: X54: 915-928 MHz

Notes

  • Transmitters to be used with receivers must be updated via IR. After the receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER.
  • For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.6.10:
    • QLX-D receiver 1.0.15

Associated products

ULXD1

Transmisor digital bodypack, compatible con los sistemas inalámbricos digitales ULX-D, que ofrece un rendimiento RF excepcional sin comprometer la calidad del audio.

ULXD2/B58

Incluye el micrófono Beta 58A y el transmisor inalámbrico de mano ULXD2 para ofrecer un rendimiento RF excepcional sin comprometer la calidad del audio.

ULXD2/B87A

Incluye el micrófono Beta 87A y el transmisor inalámbrico de mano ULXD2 para ofrecer un rendimiento RF excepcional sin comprometer la calidad del audio.

ULXD2/B87C

Incluye el micrófono Beta 87C y el transmisor inalámbrico de mano ULXD2 para ofrecer un rendimiento RF excepcional sin comprometer la calidad del audio.

ULXD2/K8

Incluye el micrófono KSM8 y el transmisor de mano inalámbrico ULXD2 para ofrecer un sonido excepcional a los profesionales del touring del mundo entero.

ULXD2/KSM9

Incluye el micrófono KSM9 y el transmisor inalámbrico de mano ULXD2, capaz de capturar todos los matices vocales con un extraordinario detalle en actuaciones en directo.

ULXD2/KSM9HS

Incluye el micrófono KSM9HS y el transmisor inalámbrico de mano ULXD2 y es capaz de capturar todos los matices vocales con gran detalle en actuaciones en directo.

ULXD2/SM58

Incluye el micrófono SM58 y el transmisor inalámbrico de mano ULXD2 para ofrecer un rendimiento RF excepcional sin comprometer la calidad del audio.

ULXD2/SM86

Incluye el micrófono SM86 y el transmisor inalámbrico de mano ULXD2 para ofrecer un rendimiento RF excepcional sin comprometer la calidad del audio.

ULXD2/SM87

Incluye el micrófono SM87 y el transmisor inalámbrico de mano ULXD2 para ofrecer un rendimiento RF excepcional sin comprometer la calidad del audio.