Firmware

SBC250/450/850 - Networked Charging Station

Versions

Date Posted

Download

2.5.0
1/07/2021

Improvements

  • NEW TCPI command for SBC250/SBC450/SBC850:
    • FW_VER - Firmware version of docked microphone

Notes 

  • SBC250 User Guide
  • SBC450/850 User Guide
  • To set up ULXD6/8 transmitters to receive firmware updates while docked in SBC250/450/850 Networked Charging Stations, follow these steps:
    1. Place transmitters on a charging station and ensure the charging station is connected to the network.
    2. Launch Shure Update Utility to find firmware updates.
    3. Download updates and select Send Updates.
  • To operate SBC250/450/850 version 2.5.0 with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD6/8 Transmitters and ULXD4/4D/4Q Receivers 2.5.0
    • QLX-D QLXD4 Receivers 2.3.24
    • Wireless Workbench 6.14.1
    • Shure Update Utility 2.6.1
    • ShurePlus Channels 1.4.6
2.4.13
16/10/2020

Improvements

  • Improved network management capabilities for Shure Control Applications

Known Issue 

  • SBC250/450/850 devices are not compatible with SystemOn 2.0-3.0.1 

Notes

  • SBC250 User Guide
  • SBC450/850 User Guide
  • To set up ULXD6/8 transmitters to receive firmware updates while docked in SBC250/450/850 Networked Charging Stations, follow these steps: 
    1. Place transmitters on a charging station and ensure the charging station is connected to the network.
    2. Launch Shure Update Utility to find firmware updates.
    3. Download updates and select Send Updates. 
  • To operate SBC250/450/850 version 2.4.13 with other Shure networked systems and software, see the following list of minimum versions: 
    • ULX-D ULXD6/8 Transmitters and ULXD4/4D/4Q Receivers 2.4.9
    • QLX-D QLXD4 Receivers 2.3.22
    • Wireless Workbench 6.13.3
    • Shure Update Utility 2.4.8
    • ShurePlus Channels 1.4.2
2.4.9
11/11/2019

Improvement 

  • Changed version number to allow all ULX-D devices in a configuration to have the same firmware version. 

Known Issue 

  • SBC250/450/850 devices are not compatible with SystemOn 2.0-3.0.1 

Notes 

  • SBC250 User Guide
  • SBC450/850 User Guide
  • To set up ULXD6/8 transmitters to receive firmware updates while docked in SBC250/450/850 Networked Charging Stations, follow these steps: 
    1. Place transmitters on a charging station and ensure the charging station is connected to the network.
    2. Launch Shure Update Utility to find firmware updates.
    3. Download updates and select Send Updates. 
  • To operate SBC250/450/850 version 2.4.9 with other Shure networked systems and software, see the following list of minimum versions: 
    • ULX-D ULXD6/8 Transmitters and ULXD4/4D/4Q Receivers 2.4.9 
    • QLX-D QLXD4 Receivers 2.3.8 
    • Wireless Workbench 6.13.1 
    • Shure Update Utility 2.4.6 
    • ShurePlus Channels 1.4.2
2.3.6
5/12/2018

Important

  • SBC250/450/850 charging stations updated to version 2.3.4 or higher can’t be downgraded to version 2.2.24 or below.
  • ULX-D receivers must be on version 2.2.24 or higher and QLXD4 receivers on version 2.2.11 or higher in order to be used with SBC250 charging stations.
  • ULX-D receivers must be on version 2.1.6 or higher and QLXD4 receivers on version 2.1.5 or higher in order to be used with SBC450/850 charging stations.

Improvement

  • Resolves compatibility with updated hardware revision.

Known Issue

  • SBC250/450/850 devices are not compatible with SystemOn 2.0-3.0.1

Notes

  • SBC450/850 User Guide
  • To set up ULXD6/8 transmitters to receive firmware updates while docked in SBC250/450/850 Networked Charging Stations, follow these steps:
    1. Place transmitters on a charging station and ensure the charging station is connected to the network.
    2. Launch Shure Update Utility to find firmware updates.
    3. Download updates and select Send Updates.
  • To operate SBC250/450/850 version 2.3.6 with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD6/8 Transmitters and ULXD4/4D/4Q Receivers 2.3.4
    • QLX-D QLXD4 Receivers 2.2.11
    • Wireless Workbench 6.12.6
    • Shure Update Utility 2.4.3
    • ShurePlus Channels 1.4.2
2.3.4
7/11/2018

Important

  • ULX-D receivers must be on version 2.2.24 or higher and QLXD4 receivers on version 2.2.11 or higher in order to be used with SBC250 charging stations.
  • ULX-D receivers must be on version 2.1.6 or higher and QLXD4 receivers on version 2.1.5 or higher in order to be used with SBC450/850 charging stations.

Improvement

  • Changed version number to allow all ULX-D devices in a configuration to have the same firmware version.

Known Issue

  • SBC250/450/850 devices are not compatible with SystemOn 2.0-3.0.1

Notes

  • SBC450/850 User Guide
  • To set up ULXD6/8 transmitters to receive firmware updates while docked in SBC250/450/850 Networked Charging Stations, follow these steps:
    1. Place transmitters on a charging station and ensure the charging station is connected to the network.
    2. Launch Shure Update Utility to find firmware updates.
    3. Download updates and select Send Updates.
  • To operate SBC250/450/850 version 2.3.4 with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD6/8 Transmitters and ULXD4/4D/4Q Receivers 2.3.4
    • QLX-D QLXD4 Receivers 2.2.11
    • Wireless Workbench 6.12.6
    • Shure Update Utility 2.4.3
    • ShurePlus Channels 1.4.2
2.2.24
14/06/2018

Important

  • ULX-D receivers must be on version 2.2.24 and QLXD4 receivers on version 2.2.11 in order to be used with SBC250 charging stations.
  • ULX-D receivers must be on version 2.1.6 or higher and QLXD4 receivers on version 2.15 or higher in order to be used with SBC450/850 charging stations.

Improvement

  • Version number change to allow all SBC250/450/850 charging stations in a configuration with ULX-D transmitters to have the same firmware version.

Known Issue

  • SBC250/450/850 devices are not compatible with SystemOn 2.0-3.0.1

Notes

  • SBC450/850 User Guide
  • To set up ULXD6/8 transmitters to receive firmware updates while docked in SBC250/450/850 Networked Charging Stations, follow these steps:
    1. Place transmitters on a charging station and ensure the charging station is connected to the network.
    2. Launch Shure Update Utility to find firmware updates.
    3. Download updates and select Send Updates.
  • To operate SBC250/450/850 version 2.2.24 with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD6/8 Transmitters and ULXD4/4D/4Q Receivers 2.2.X
    • QLX-D QLXD4 Receivers 2.2.11
    • Wireless Workbench 6.12.4
    • Shure Update Utility 2.4.2
    • ShurePlus Channels 1.4.1
2.2.23
22/05/2018

Important

  • ULX-D or QLX-D receivers used with SBC250/450/850 charging stations must be updated to the following minimum firmware versions:
    • ULXD4, ULXD4D, and ULXD4Q Receivers 2.2.X
    • QLXD4 Receivers 2.2.11

New Feature

Improvements

  • Bug fixes

Known Issue

  • SBC250/450/850 devices are not compatible with SystemOn 2.0-3.0.1

Notes

  • SBC450/850 User Guide
  • To set up ULXD6/8 transmitters to receive firmware updates while docked in SBC250/450/850 Networked Charging Stations, follow these steps:
    1. Place transmitters on a charging station and ensure the charging station is connected to the network.
    2. Launch Shure Update Utility to find firmware updates.
    3. Download updates and select Send Updates.
  • To operate SBC250/450/850 version 2.2.23 with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD6/8 Transmitters and ULXD4/4D/4Q Receivers 2.2.X
    • QLX-D QLXD4 Receivers 2.2.11
    • Wireless Workbench 6.12.4
    • Shure Update Utility 2.4.2
    • ShurePlus Channels 1.4.1
2.1.16
19/05/2017

Important

  • ULX-D or QLX-D receivers used with SBC450/850 charging stations version 2.1.6 must be updated to the following minimum firmware versions:
    • ULXD4, ULXD4D, and ULXD4Q Receivers 2.1.16 or higher
    • QLXD4 Receivers 2.1.5 or higher

New Feature

  • Initial release for SBC450 and SBC850 Networked Charging Stations

Known Issue

  • SBC450/850 version 2.1.16 Networked Charging Stations are not compatible with SystemOn 2.1

Notes

  • SBC450/850 User Guide
  • ULXD6/8 transmitters can receive firmware updates while docked in an SBC450 or SBC850 Networked Charging Station.
    1. Place transmitters on charging station and ensure charging station is connected to the network.
    2. Launch Shure Update Utility to find firmware updates.
    3. Download updates and click Send Updates.
  • To operate SBC450/850 version 2.1.16 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD6/8 Transmitters and ULXD4, ULXD4D, ULXD4Q Receivers 2.1.16
    • Wireless Workbench 6.12.2
    • Shure Update Utility 2.4
    • ShurePlus Channels 1.3.1

Associated products

SBC250

Compact networked two-bay docking station charges ULXD6 or ULXD8 transmitters and can be rack-mounted or wall-mounted with optional URT3 rack tray.

SBC450

Estación de carga en red de 4 puertos para cargar hasta 4 transmisores ULXD6 o ULXD8 equipados con la batería recargable SB900A.

SBC850

Estación de carga en red de 8 puertos para cargar hasta 8 transmisores ULXD6 o ULXD8 equipados con la batería recargable SB900A.