Software & Firmware Archives

New Feature

• Initial firmware for the SBC840M 8-Bay Charger.

Notes

• To operate SBC840M version 1.1.43 with other Shure devices and software, see the following list of minimum versions:
  • Axient Digital ADX1 Transmitters 1.1.43
  • Shure Update Utility 2.4.2
  • Wireless Workbench 6.12.5

New Feature

• Initial firmware for the SBC840 8-Bay Charger.

Notes

• To operate SBC840 version 1.1.43 with other Shure devices and software, see the following list of minimum versions:
  • Shure Update Utility 2.4.2
  • Wireless Workbench 6.12.5

New Feature

• Initial firmware for the SBC220 Networked Charging Station and SBC240 2-Bay Dock Charger.

Notes

• To operate SBC220 or SBC240 version 1.1.43 with other Shure devices and software, see the following list of minimum versions:
  • Wireless Workbench 6.12.5

Improvement

• Bug fixes

Notes

• To operate AD610 version 1.1.43 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.1.43
  • Axient Digital AD4D/Q Receivers 1.1.43
  • SBRC Shure Battery Rack Charger 1.1.X
  • Shure Update Utility 2.4.2
  • ShurePlus Channels 1.4.2
  • Wireless Workbench 6.12.5

Improvements

• Modem improvements to mitigate against false interference detection events.
• Support for new or changed frequency bands:
  • Israel (R52) 794 MHz – 806 MHz
  • U.S. (G57) 470 MHz – 608 MHz: Now excludes 600 MHz guard bands
  • U.S. (G57+) 470 MHz – 608 MHz and 614 – 616 MHz: Includes UHFTV + Guard bands.
• Menu UI improvements
• New command strings
• Bug fixes

Notes

• User Guide
• AD4Q version 1.1.43 is compatible with AD4Q devices on version 1.1.43 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate AD4Q version 1.1.43 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.1.43
  • Axient Digital AD4D/Q Receivers 1.1.43
  • Axient AXT600 Spectrum Manager 2.1.22
  • SBRC Shure Battery Rack Charger 1.1.X
  • Shure Update Utility 2.4.2
  • ShurePlus Channels 1.4.2
  • Wireless Workbench 6.12.5

Improvements

• Modem improvements to mitigate against false interference detection events.
• Support for new or changed frequency bands:
  • Israel (R52) 794 MHz – 806 MHz
  • U.S. (G57) 470 MHz – 608 MHz: Now excludes 600 MHz guard bands
  • U.S. (G57+) 470 MHz – 608 MHz and 614 – 616 MHz: Includes UHFTV + Guard bands.
• Menu UI improvements
• New command strings
• Bug fixes

Notes

• User Guide
• AD4Q version 1.1.43 is compatible with AD4D devices on version 1.1.43 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate AD4D version 1.1.43 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.1.43
  • Axient Digital AD4D/Q Receivers 1.1.43
  • Axient AXT600 Spectrum Manager 2.1.22
  • SBRC Shure Battery Rack Charger 1.1.X
  • Shure Update Utility 2.4.2
  • ShurePlus Channels 1.4.2
  • Wireless Workbench 6.12.5

Improvements

• Added an improvement to save the video if the device overheats.

Known Issues

• Some users of iPhone 8 or iPhone X may experience silence or noisy artifacts on their recordings. iOS 11.3 includes a fix for this issue, so we strongly suggest that all users with either of these phones upgrade to the latest version of iOS.
• If the screen is locked while a MOTIV microphone is plugged in, the app may no longer be able to access it. To fix this issue, return to the home screen, force-close the app, then unplug and re-plug the microphone.
• Users of iPhone 8 who are running iOS 11.3 may experience crashes when playing back saved recordings from within the app.
• If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.

Notes

• MOTIV Video User Guide
• MV88 User Guide
• Supports iPhone 5S and later – iPad and iPod Touch are not supported
• Compatible with iOS 11.1 or later

Improvements

• New RF band support
• Visual improvements for iPhone X
• Performance improvements with large systems of UHF-R
• Bug fixes

Notes

• Monitors and controls Axient® Digital, Axient®, UHF-R®, ULX-D® Digital and QLX-D® Digital, and PSM®1000 wireless systems
• Compatible with iPhone, iPad, and iPod touch running iOS 10 – 11
• An 802.11n or 802.11ac wireless router is recommended
• For best results update the Shure wireless system’s firmware using the Shure Update Utility.
• ShurePlus Channels Wifi Guidlines

Recommendation

Update all MXA910 devices in a configuration to the same firmware version.

Improvements

• DSP Updates
  • Faster Auto Position performance: Only 2-3 seconds required for auto position setup
  • Echo Reduction Meter and Faders: Enhanced echo reference level control
  • EQ Contour: New presets for faster room tuning
  • Send to Mix: Assign selected channels to direct out only or direct out and Automix
  • Pre- and Post-Automix Fader
  • Pre- and Post-Automix Mute
  • Automix Gain Meters
• Hardware Light Bar
  • More color options (now 17 total)
  • More brightness levels (now 6 total, including off)
• New command strings
• Bug fixes
  • Devices lock up due to TPCI connection issues
  • Users access GUI without completing password recovery

Known Issues

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported.

Notes

• User Guide
• Command strings
• MXA910 version 3.0.24 is compatible with MXA910 devices running version 3.0.24 and below, but updating all devices used together to the same firmware version is recommended.
• To operate MXA910 version 3.0.24 with Dante™ Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate MXA910 version 3.0.24 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI22 2.0.18
  • ANI4IN 2.0.18
  • ANI4OUT 2.0.18
  • ANIUSB-MATRIX 2.0.19
  • Designer 3.0
  • MXA310 3.0.24
  • Microflex Wireless 5.2.2
  • P300 IntelliMix® Audio Conferencing Processor 2.1.6
  • ULXD4D/4Q 2.2.24
  • SCM820 1.3.3
  • Shure Update Utility 2.4.2
  • Shure Web Device Discovery 1.2

Recommendation

Update all MXA310 devices in a configuration to the same firmware version.

Improvements

• DSP
  • Per-Channel PEQ: Adds PEQ to all channels in MXA310
  • Send to Mix: Assign selected channels to direct out only or direct out and Automix
  • Pre- and Post-Automix Fader
  • Pre- and Post-Automix Mute
  • Automix Gain Meters
• Hardware Light Ring
  • More color options (now 17 total)
  • More brightness levels (now 6 total, including off)
• New command strings
• Bug fixes
  • Devices lock up due to TPCI connection issues
  • Users access GUI without completing password recovery

Known Issues

• After updating from version 2.X to 3.0.24, Channel EQ settings return to their default settings.
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• User Guide
• Command strings
• MXA310 version 3.0.24 is compatible with MXA310 devices running version 3.0.24 and below, but updating all devices used together to the same firmware version is recommended.
• To operate MXA310 version 3.0.24 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate MXA310 version 3.0.24 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI22 2.0.18
  • ANI4IN 2.0.18
  • ANI4OUT 2.0.18
  • ANIUSB-MATRIX 2.0.19
  • MXA910 3.0.24
  • Microflex Wireless 5.2.2
  • P300 IntelliMix® Audio Conferencing Processor 2.1.6
  • ULXD4D/4Q 2.2.24
  • SCM820 1.3.3
  • Shure Update Utility 2.4.2
  • Shure Web Device Discovery 1.2