Software & Firmware Archives

New Feature

• Initial firmware for ANIUSB-MATRIX

Notes

• To operate ANIUSB-MATRIX version 2.0.11 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANIUSB-MATRIX version 2.0.11 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI4IN 2.0.7
  • ANI4OUT 2.0.8
  • MXA310 2.0.7
  • MXA910 2.0.8
  • Microflex Wireless 5.1.23
  • SCM820 1.3.3
  • Shure Update Utility 2.4
  • Shure Web Device Discovery 1.1

New Features

• Initial firmware for ANI22

Notes

• To operate ANI22 version 2.0.11 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANI22 version 2.0.11 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI4IN 2.0.7
  • ANI4OUT 2.0.8
  • MXA310 2.0.7
  • MXA910 2.0.8
  • Microflex Wireless 5.1.23
  • SCM820 1.3.3
  • Shure Update Utility 2.4
  • Shure Web Device Discovery 1.1

*****
UPDATE: June 20, 2018: Designer 3.0 is compatible with MXA910 version 3.0.24
*****

Release Date: 8/11/2017

Initial release

Known Issues

• When importing a Designer preset file into the MXA910 web application, attempts to immediately export that file out of the web application will fail if it's not first loaded and saved to the MXA910
• When importing a Designer preset file into the MXA910 web application using MXA910 release 2.0.8 and earlier, attempts to use the low shelf filter after rebooting the device will fail if the preset file was not saved to one of the preset slots

Notes

• Internet access is required during the installation process
• Designer User Guide
• System Requirements
• Designer 3.0 is compatible with MXA910 version 1.1.3–2.0.19

Improvements

• Support for Axient® Digital with AD Series transmitters
• Bug fixes and performance enhancements

Notes

• Monitors and controls Axient® Digital, Axient®, UHF-R®, ULX-D® Digital and QLX-D® Digital, and PSM®1000 wireless systems
• Compatible with iPhone, iPad, and iPod touch running iOS 9 – 10
• A Wi-Fi connection to the networked Shure wireless systems is required
• An 802.11n or 802.11ac wireless router is recommended
• For best results update the Shure wireless system’s firmware using the Shure Update Utility.
• ShurePlus Channels Wifi Guidlines

Important

• This version applies to AD1 and AD2 transmitters

Initial Release

Notes

• To operate AD1 and AD2 version 1.0.17 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 Transmitters 1.0.17
  • Axient Digital AD4D/Q Receivers 1.0.17
  • Axient AXT600 Spectrum Manager 2.0.27
  • SBRC Shure Battery Rack Charger 1.0.1
  • Shure Update Utility 2.4
  • ShurePlus Channels 1.4
  • Wireless Workbench 6.12.2

Improvements

• Added support for updating the following devices:
  • AD and ADX Transmitters
  • AD4D Two-Channel Receiver
  • AD4Q Four-Channel Receiver
  • AD610 Diversity ShowLink Access Point
  • ULXD6/8 Transmitters
  • SBC240/450/840/840M/850 Networked Charging Stations
• Added support for the following new frequency band:
  • QLX-D G62

Known Issues

• Attempts to download ULXD6/8 transmitter firmware to a ULX-D or QLX-D receiver that is not at the minimum firmware version will fail. To update firmware for ULXD6/8 transmitters with ULX-D or QLX-D receivers:
  1. Update receivers to the following minimum versions:
     • ULXD4, ULXD4D, ULXD4Q Receivers 2.1.16
     • QLXD4 Receivers 2.1.5
  2. Using Shure Update Utility, download ULXD6/8 transmitter firmware to the receivers.
  3. Using the FW Update menu on a receiver, update transmitters.
• Microflex Wireless devices running version 1.X firmware must first be updated to version 2.0.5 before being updated to version 3.X or later.

Notes

• Shure Update Utility (SUU) version 2.4 requires 64-bit operating systems. To install SUU on a 32-bit computer, download version 2.2.2: Windows 7, 8, 10 or Mac OS X 10.9 – 10.11
• Installing Shure Update Utility on Windows will also prompt the installation of a USB driver, which must be installed to support updating USB devices, like GLX-D.
• KSE1500, SHA900 and GLX-D (USB 2.0 connected devices) must be updated one at a time.
• USB hubs are not recommended when updating USB 2.0 connected devices. Always connect these devices directly to a USB terminal of the computer running Shure Update Utility.
• Shure Update Utility 2.4 is compatible with Wireless Workbench 6.12.2 or later.

New Feature

• Initial release

Notes

• To operate AD4Q version 1.0.17 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 Transmitters 1.0.17
  • Axient Digital AD4D/Q Receivers 1.0.17
  • Axient AXT600 Spectrum Manager 2.0.X
  • SBRC Shure Battery Rack Charger 1.0.1
  • Shure Update Utility 2.4
  • ShurePlus Channels 1.4
  • Wireless Workbench 6.12.2

New Feature

• Initial release

Notes

• To operate AD4D version 1.0.17 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 Transmitters 1.0.17
  • Axient Digital AD4D/Q Receivers 1.0.17
  • Axient AXT600 Spectrum Manager 2.0.X
  • SBRC Shure Battery Rack Charger 1.0.1
  • Shure Update Utility 2.4
  • ShurePlus Channels 1.4
  • Wireless Workbench 6.12.2

Hotfix

Important

• This version is a hotfix for use in systems with CU 6105, CU 6110 and DIS-CCU Central Units only
• This version cannot be used to upgrade systems using CU 6005, CU 6010 or CU 6011 Central Units
• This version is compatible with SW6000 Software License file v1.7 only
  • If upgrading from SW6000 v6.0.xxx or later, a new SW6000 license is not needed
  • If upgrading from SW6000 v5.8.xxx or earlier, a new SW6000 license is needed

Bug Fixes

CUA

• Fixed an error where Pause / Resume meeting did not restore request list in the correct sorting order
• Fixed an error where Pause / Resume meeting did not restore all entries in the request list

Version 6.5.25

Release Date: 6/23/2017

Feature Release

Important

• This version is a feature release for use in systems with CU 6105, CU 6110 and DIS-CCU Central Units only
• This version cannot be used to upgrade systems using CU 6005, CU 6010 or CU 6011 Central Units
• This version can upgrade SW6000 from all previous SW6000 versions
• This version is compatible with SW6000 Software License file v1.7 only
  • If upgrading from SW6000 v6.0.xxx or later, a new SW6000 license is not needed
  • If upgrading from SW6000 v5.8.xxx or earlier, a new SW6000 license is needed

New Features

• Added speech counter in CUA Microphone and Main display
• Added speech counter configuration in CAA/Participant List Configuration
• Added option to configure the voting mimic icons used in the CDA
• Added configuration option in CAA/Configuration/Voting Configuration
• CAA: Report generation time reduced (all reports)
• CDA: Added command-line option to disable page switching
• CUA: Button configuration for speak button and voting buttons color added in the ‘prjCUA.exe.config’ file

Bug Fixes

CUA

• Fixed an error
  • where Pause / Resume meeting did not restore request list
  • for missing Meeting Role information in CUA after using CAA Conference Unit ‘Replace Unit’
  • where CUA Mimic shows assigned user in the meeting mode: ‘Code On List
  • where the Microphone in ‘Manual + reply’ mode cannot be not removed from request list when turned on from Mimic and Mic. ext. control
  • where the manual timer updates anomaly
  • where a participant cannot re-login
  • where the Meeting Role is not updated properly in CUA when Speaker is set for an agenda subject
  • where the buttons ‘Set agenda status’ do not have their own labels (3 labels)

CAA

• Fixed errors with
  • the agenda, when assigning a speaker to an Agenda Subject in a Meeting
  • Room Configuration. Meeting Role is not being applied to a unit
  • Voting reports - individual participants are listed multiple times each
  • Voting reports - missing some results from proxy delegates
  • participants votes, which are ignoring the use of voting weight
  • Label 507, which is used in some wrong places
  • Participant Table, unable to clear Replacement For …..
  • duplicated user ID in Prepared Participant List
  • printing reports from CUA
  • editing a Participant Seat Table
  • the Participant Seat Table, where participants cannot be moved from one seat to another in the table
  • the language selection menu 'Invariant Language (Invariant Country)
  • an CAA Exception: when adding participants in Meeting Mode: Prepared Participant List
  • importing the ‘Default Participant Table’ to a ‘Prepared Participant Table’

CDA

• Fixed an error
  • with Logged In display: Wrong Group shown for meeting using’ Participants Lists’
  • with Microphone Display: Pause speech timer indicator missing
  • with Microphone Display: Speech time count down timer keeps on blinking, red color does not stop after time has run out or the meeting is stopped
  • with font size in skin editor

CUI

• CUI Fix for Web service exception with very large agenda: Maximum request length exceeded
• ‘Pooltime’ default value changed to 200ms (can also be set in command line). Note: This time shall still be set using CUI command line parameter for customers using automatic login on preferred seat in large system

Reports

• Participant Meeting Report, ID 1243 – Fix for show time for non-participating participants
• Participant Statistical Report - Fix for incorrect if changes occur while CAA is open with active meeting
• Participant Statistical Report - Participant Speech Time is not updated properly
• Meeting Log report – sub repor6t parameters missing Vote report(s) with Groups - missing 'No Group' in Group Voting Result table Meeting Log Report - generation failed (on Russian database)

Installer

• Prevent installing on systems where SQL server version is 2005 or earlier

Recommendation

Update all MXA910 devices in a configuration to the same firmware version.

New Features

• AES67
• Audio Encryption support with MXA910, MXA310, ANI4IN, ANI4OUT, ANIUSB-MATRIX, ANI22 and P300-IMX.
• Packet Bridge
• PEQ copy/paste and import/export options

Improvements

• Configuration
  • PEQ tab added
  • Revised templates for better out-of-the-box room coverage
• Presets
  • "Default Settings" added as a preset
  • Name of the active preset displays above the Preset drop-down
  • "Clear Preset" option added to "Save As Preset"
• Improved auto position performance
• Device names can now begin with a number
• New commands strings
• Fixed an IP configuration issue in manual mode that prevents setting IP address w.x.y.z with subnet mask 255.0.0.0 for class A networks.
• General bug fixes

Known Issue

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• MXA910: User Guide | Command Strings
• MXA910 version 2.0.8 is compatible with MXA910 devices running version 2.0.8 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate MXA910 version 2.0.8 with Dante™ Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate MXA910 version 2.0.8 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI4IN 2.0.7
  • ANI4OUT 2.0.8
  • MXA310 2.0.8
  • Microflex Wireless 5.1.23
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.3.0.18
  • Shure Web Device Discovery 1.1