Downloads

Software & Firmware Archives

Type

Release Title

Latest Version

Associated Products

Descargar

Firmware
2.5.0

Notes

  • User Guide
  • To operate ULX-D version 2.5.0 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD4/4D/4Q Receivers 2.5.0
    • QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.3.24
    • Axient AXT600 Spectrum Manager 2.1.38
    • Wireless Workbench 6.14.1
    • Shure Update Utility 2.6.1
    • ShurePlus Channels 1.4.6
Firmware
2.5.0

Notes

  • User Guide
  • To operate ULX-D version 2.5.0 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD4/4D/4Q Receivers 2.5.0
    • QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.3.24
    • Axient AXT600 Spectrum Manager 2.1.38
    • Wireless Workbench 6.14.1
    • Shure Update Utility 2.6.1
    • ShurePlus Channels 1.4.6
Firmware
2.5.0

Important

  • ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

  • NEW TCPI commands for ULXD4/ULXD4D/ULXD4Q:
    • MODEL - Name of the receiver model
    • TX_FW - Firmware version of the received transmitter
  • Support added for new ULXD4D/Q devices which ensure that encryption is used
    • At this time, AXT600 Spectrum Manager does not support always encryption DCID

Notes

  • User Guide
  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER
  • To operate ULX-D version 2.5.0 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULXD1/2/6/8 Transmitters and ULXD4/4D/4Q Receivers 2.5.0
    • SBC250/450/850 Networked Charging Stations 2.4.13
    • Axient AXT600 Spectrum Manager 2.1.38
    • Wireless Workbench 6.14.1
    • Shure Update Utility 2.6.1
    • ShurePlus Channels 1.4.6
Firmware
2.5.0

Important

  • ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

  • NEW TCPI commands for ULXD4/ULXD4D/ULXD4Q:
    • MODEL - Name of the receiver model
    • TX_FW - Firmware version of the received transmitter
  • Support added for new ULXD4D/Q devices which ensure that encryption is used
    • At this time, AXT600 Spectrum Manager does not support always encryption DCID

Notes

  • User Guide
  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER
  • To operate ULX-D version 2.5.0 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULXD1/2/6/8 Transmitters and ULXD4/4D/4Q Receivers 2.5.0
    • SBC250/450/850 Networked Charging Stations 2.4.13
    • Axient AXT600 Spectrum Manager 2.1.38
    • Wireless Workbench 6.14.1
    • Shure Update Utility 2.6.1
    • ShurePlus Channels 1.4.6
Firmware
2.5.0

Important

  • ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

  • NEW TCPI commands for ULXD4/ULXD4D/ULXD4Q:
    • MODEL - Name of the receiver model
    • TX_FW - Firmware version of the received transmitter
  • Support added for new ULXD4D/Q devices which ensure that encryption is used
    • At this time, AXT600 Spectrum Manager does not support always encryption DCID

Notes

  • User Guide
  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER
  • To operate ULX-D version 2.5.0 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULXD1/2/6/8 Transmitters and ULXD4/4D/4Q Receivers 2.5.0
    • SBC250/450/850 Networked Charging Stations 2.4.13
    • Axient AXT600 Spectrum Manager 2.1.38
    • Wireless Workbench 6.14.1
    • Shure Update Utility 2.6.1
    • ShurePlus Channels 1.4.6
Firmware
2.5.0

Important

  • ULXD4D and ULXD4Q receivers running firmware prior to 1.4.8 must be updated to 1.4.8 before updating to newer versions.
  • ULXD4D and ULXD4Q receivers running firmware between 1.4.8 and 2.0.28 must be updated to 2.0.28 before updating to newer versions.
  • After 2.0.28 is installed, ULXD4D and ULXD4Q receivers can be updated to the latest available firmware version.
  • ULX-D devices that are downgrading to 1.5.6 may report a false failure.
    • Workaround: Because this is a false failure, closing the send updates window and going to the main page, Shure Update Utility will show green for the firmware version.
  • ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

  • NEW TCPI commands for ULXD4/ULXD4D/ULXD4Q:
    • MODEL - Name of the receiver model
    • TX_FW - Firmware version of the received transmitter
  • Support added for new ULXD4D/Q devices which ensure that encryption is used
    • At this time, AXT600 Spectrum Manager does not support always encryption DCID

Notes

  • User Guide
  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER
  • To operate ULX-D version 2.5.0 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULXD1/2/6/8 Transmitters and ULXD4/4D/4Q Receivers 2.5.0
    • SBC250/450/850 Networked Charging Stations 2.4.13
    • Axient AXT600 Spectrum Manager 2.1.38
    • Wireless Workbench 6.14.1
    • Shure Update Utility 2.6.1
    • ShurePlus Channels 1.4.6
Firmware
2.5.0

Important

  • ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

  • NEW TCPI commands for ULXD4/ULXD4D/ULXD4Q:
    • MODEL - Name of the receiver model
    • TX_FW - Firmware version of the received transmitter
  • Support added for new ULXD4D/Q devices which ensure that encryption is used
    • At this time, AXT600 Spectrum Manager does not support always encryption DCID

Notes

  • User Guide
  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER
  • To operate ULX-D version 2.5.0 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULXD1/2/6/8 Transmitters and ULXD4/4D/4Q Receivers 2.5.0
    • SBC250/450/850 Networked Charging Stations 2.4.13
    • Axient AXT600 Spectrum Manager 2.1.38
    • Wireless Workbench 6.14.1
    • Shure Update Utility 2.6.1
    • ShurePlus Channels 1.4.6
Firmware
2.5.0

Important

  • ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

  • NEW TCPI commands for ULXD4/ULXD4D/ULXD4Q:
    • MODEL - Name of the receiver model
    • TX_FW - Firmware version of the received transmitter
  • Support added for new ULXD4D/Q devices which ensure that encryption is used
    • At this time, AXT600 Spectrum Manager does not support always encryption DCID

Notes

  • User Guide
  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER
  • To operate ULX-D version 2.5.0 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULXD1/2/6/8 Transmitters and ULXD4/4D/4Q Receivers 2.5.0
    • SBC250/450/850 Networked Charging Stations 2.4.13
    • Axient AXT600 Spectrum Manager 2.1.38
    • Wireless Workbench 6.14.1
    • Shure Update Utility 2.6.1
    • ShurePlus Channels 1.4.6
Firmware
2.5.0

Important

  • ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.
  • ULXD4D and ULXD4Q receivers running firmware prior to 1.4.8 must be updated to 1.4.8 before updating to newer versions.
  • ULXD4D and ULXD4Q receivers running firmware between 1.4.8 and 2.0.28 must be updated to 2.0.28 before updating to newer versions.
  • After 2.0.28 is installed, ULXD4D and ULXD4Q receivers can be updated to the latest available firmware version.
  • ULX-D devices that are downgrading to 1.5.6 may report a false failure.
    • Workaround: Because this is a false failure, closing the send updates window and going to the main page, Shure Update Utility will show green for the firmware version.

Improvements

  • NEW TCPI commands for ULXD4/ULXD4D/ULXD4Q:
    • MODEL - Name of the receiver model
    • TX_FW - Firmware version of the received transmitter
  • Support added for new ULXD4D/Q devices which ensure that encryption is used
    • At this time, AXT600 Spectrum Manager does not support always encryption DCID

Notes

  • User Guide
  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER
  • To operate ULX-D version 2.5.0 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULXD1/2/6/8 Transmitters and ULXD4/4D/4Q Receivers 2.5.0
    • SBC250/450/850 Networked Charging Stations 2.4.13
    • Axient AXT600 Spectrum Manager 2.1.38
    • Wireless Workbench 6.14.1
    • Shure Update Utility 2.6.1
    • ShurePlus Channels 1.4.6
Firmware
2.5.0

Important

  • ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

  • NEW TCPI commands for ULXD4/ULXD4D/ULXD4Q:
    • MODEL - Name of the receiver model
    • TX_FW - Firmware version of the received transmitter
  • Support added for new ULXD4D/Q devices which ensure that encryption is used
    • At this time, AXT600 Spectrum Manager does not support always encryption DCID

Notes

  • User Guide
  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER
  • To operate ULX-D version 2.5.0 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULXD1/2/6/8 Transmitters and ULXD4/4D/4Q Receivers 2.5.0
    • SBC250/450/850 Networked Charging Stations 2.4.13
    • Axient AXT600 Spectrum Manager 2.1.38
    • Wireless Workbench 6.14.1
    • Shure Update Utility 2.6.1
    • ShurePlus Channels 1.4.6