• Page 35 of 41
  1. 1
  2. 30
  3. 31
  4. 32
  5. 33
  6. 34
  7. 35
  8. 36
  9. 37
  10. 38
  11. 39
  12. 40
  13. 41
Filter by: Date Posted Filter by: Title Filter by: Version Associated Products Filter by: File Size
July 03, 2013 MXWANI4 - Audio Network Interface 1.1.9 See release notes Download PACK (4.84 mb)

These release notes cover the following models:

  • MXW6/8
  • MXWANI4/8
  • MXWAPT4/8
  • MXWNCS4/8

NEW FEATURES

  • Initial Release

KNOWN ISSUES

  • MXW1, MXW2 are not supported in 1.1.9
  • Users may see large fluctuations in Battery time while in Standby Mode
  • GUI connectivity issues may arrise with systems that have been powered on and running continuously for ~20 consecutive days. Power-cycle the system to reinitialize communication. Audio and RF performance are not affected.

NOTES

  • For operation of MXW devices with other Shure networked systems, see the following list of minimum software and firmware versions that are supported with MXW version 1.1.9:
    • SCM820-DAN 1.0.11
    • Shure Web Device Discovery 1.0.8
July 03, 2013 ULXD1/2 - Wireless Transmitter 1.3.6 See release notes Download PACK (201 kb)

NEW FEATURES

  • Transmitter "Mute Mode"
    • A mode that changes the functionality of transmitter power switch from "power on/off" to "mute on/off". This feature is enabled/disabled through the transmitter menu, within the UTILITIES section of the menu structure. This functionality as also been added to the IR PRESETS list.
    • Transmitters will communicate via the side channel when/if Mute Mode has been engaged (displayed in Wireless Workbench) and when/if the transmitter has been muted (displayed in Wireless Workbench and the receiver).

IMPROVEMENTS

  • Added support for the X51 frequency band for use in Korea
  • Minor UI text changes for consistency across wireless lines and in Wireless Workbench.

NOTES

  • After updating a ULX-D transmitter from any firmware version to 1.3.6, the transmitter will factory reset itself automatically.
  • For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.3.6:
    • ULXD1/2 ULXD Transmitters 1.3.6
    • ULXD4, ULXD4D, ULXD4Q ULX-D Receivers 1.3.6
    • AXT400 Axient Receiver 1.10.2
    • Wireless Workbench 6 Beta version 6.6.1
July 03, 2013 ULXD4 - Digital Wireless Receiver 1.3.6 See release notes Download PACK (1.8 mb)

NEW FEATURES

  • Receiver Mute
    • Previously, receiver channels could be muted from Wireless Workbench amd not on device. Mute on/off capability has been added to the device within the AUDIO menu. Receiver mute for a channel can also be disengaged via a two-button combination push of the up/down gain arrows of that channel.
    • When "Rx Mute" has been engaged, the ability to adjust system gain is disabled. Receiver channels must be unmuted in order to adjust system gain.
    • Muting of a receiver channel is non-persistent (i.e. all channels with "Rx Mute" engaged will no longer be muted after the device is power-cycled).
  • Device Gateway Address
    • ULX-D receiver's gateway address can now be set to allow for cross-subnet control and monitoring of the receiver with 3rd party control surfaces.
    • NOTE: Wireless Workbench does not function across different subnets. This feature is for 3rd party control surfaces only.
  • Hardware Identification in Wireless Workbench
    • Enables the user to trigger a flashing sequence from the physical device to locate the Wireless Workbench representation of that device in the software.

IMPROVEMENTS

  • Added support for the X51 frequency band for use in Korea
  • Minor UI text changes for consistency across wireless lines and in Wireless Workbench.

KNOWN ISSUES

  • To ensure proper functionality of the device, users must perform a factory reset of ULX-D receivers if any of the following scenarios describe the receiver:
    • The receiver will be updated from 1.0.7 to 1.2.14
    • The receiver will be updated from 1.0.7 to 1.3.6
    • The receiver will be updated from 1.0.7 to 1.2.14 to 1.3.6 - ONLY if no factory reset was performed after updating to 1.2.14

NOTES

  • For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.3.6:
    • ULXD1/2 ULXD Transmitters 1.3.6
    • ULXD4, ULXD4D, ULXD4Q ULX-D Receivers 1.3.6
    • AXT400 Axient Receiver 1.10.2
    • Wireless Workbench 6 Beta version 6.6.1
July 03, 2013 ULXD4D - Dual Channel Digital Wireless Receiver 1.3.6 See release notes Download PACK (4.68 mb)

NEW FEATURES

  • Addition of Dante Device ID modes
    • ID Mode: Sequential - Quick sequential numbering of ULX-D receivers to take advantage of quick device set-up and labeling for Dante digital audio network.
    • ID Mode: Yamaha - specific labeling of ULX-D receiver's Dante Device ID for discovery as "online devices" by Yamaha CL Series consoles with firmware version 1.60 or later.
  • Receiver Mute
    • Previously, receiver channels could be muted from Wireless Workbench amd not on device. Mute on/off capability has been added to the device within the AUDIO menu. Receiver mute for a channel can also be disengaged via a two-button combination push of the up/down gain arrows of that channel.
    • When "Rx Mute" has been engaged, the ability to adjust system gain is disabled. Receiver channels must be unmuted in order to adjust system gain.
    • Muting of a receiver channel is non-persistent (i.e. all channels with "Rx Mute" engaged will no longer be muted after the device is power-cycled).
  • Device Gateway Address
    • ULX-D receiver's gateway address can now be set to allow for cross-subnet control and monitoring of the receiver with 3rd party control surfaces.
    • NOTE: Wireless Workbench does not function across different subnets. This feature is for 3rd party control surfaces only.
  • Hardware Identification in Wireless Workbench
    • Enables the user to trigger a flashing sequence from the physical device to locate the Wireless Workbench representation of that device in the software.

IMPROVEMENTS

  • Added support for the X51 frequency band for use in Korea
  • Minor UI text changes for consistency across wireless lines and in Wireless Workbench.

NOTES

  • For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.3.6:
    • ULXD1/2 ULXD Transmitters 1.3.6
    • ULXD4, ULXD4D, ULXD4Q ULX-D Receivers 1.3.6
    • AXT400 Axient Receiver 1.10.2
    • Wireless Workbench 6 Beta version 6.6.1
May 02, 2013 AXT200 - Axient Handheld Transmitter 1.12.8 See release notes Download PACK (142 kb)

IMPROVEMENTS

  • New models for transmitter frequency bands
    • G7C, G19, H18, J12, L20, R16
  • AXT400C receiver supports new transmitter frequency band: R16

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.12.8:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.6.1
May 02, 2013 AXT100 - Axient Bodypack Transmitter 1.12.8 See release notes Download PACK (142 kb)

IMPROVEMENTS

  • New models for transmitter frequency bands
    • G7C, G19, H18, J12, L20, R16
  • AXT400C receiver supports new transmitter frequency band: R16

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.12.8:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.6.1
May 02, 2013 AXT400 - Axient Dual Channel Receiver 1.12.8 See release notes Download PACK (2.22 mb)

IMPROVEMENTS

  • New models
    • AXT400 D Receiver with support for G7C, L3E, M8, P9 transmitter bands for use in China
    • AXT400 J Receiver with support for H18, J12, L20, G19 transmitter bands for use in Japan
    • AXT400 R16 Receiver for use in Thailand
  • New bands
    • AXT400 C receiver supports new frequency band: R16
  • Talk Switch functionality supported for G12, H12 and J5HK bands.

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.12.8:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4x ULX-D Receivers 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.6.1
May 02, 2013 AXT600 - Axient Spectrum Manager 1.12.8 See release notes Download PACK (2.32 mb)

IMPROVEMENTS

  • Support new AXT400 models
    • AXT400 D
    • AXT400 J
    • AXT400 R16
  • Support for new AXT400 frequency bands
    • AXT400 C frequency band R16

KNOWN ISSUES

  • Exclusions set by TV channel do not support Japan TV format (6 MHz channels numbered 13-52, starting at 470 MHz). To exclude Japan TV channels from frequency calculations, it is recommended to set exclusions by frequency ranges. For example Japan TV 13 = 470 – 476 MHz.
  • When a frequency list (CFL) which includes entries for ULX-D in High Density mode is deployed from WWB6 to the AXT600 Spectrum Manager there are the following known limitations:
    • The Analyze features accessed from the AXT600 front panel interface cannot perform compatibility analysis
    • The AXT600 frequency calculation tools ‘CFL>New’ and ‘Wizard>Update Freqs’ will not calculate frequencies for ULX-D High Density channels that were offline entries in WWB Inventory at the time of deployment to the Spectrum Manager.
  • Note: The AXT600 does calculate, analyze and deploy frequencies to ULX-D High Density channels that are added via the front panel interface.
  • CFL Analysis fails when the Spectrum Manager Exclusions list includes both a frequency range and a single frequency within that range. The Analysis result indicates an Exclusions conflict even though no CFL frequencies fall within the range of defined exclusions.

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.12.8:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.6.1
May 02, 2013 AXT630/AXT631/AXT632 - Axient Antenna Distribution Amplifier 1.12.8 See release notes Download PACK (1.51 mb)

IMPROVEMENTS

  • New models
    • AXT632 Antenna Distribution Amplifier for use in China
    • AXT630J Antenna Distribution Amplifier for use in Japan

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.12.8:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.6.1
May 02, 2013 AXT900 - Axient Rackmount Charging Station 1.12.8 See release notes Download PACK (1.54 mb)

NOTES

  • For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.12.8:
    • UR4 UHF-R receiver 1.166
    • UR3 Plug-on Transmitter 1.0.0.9
    • UR5 Portable Diversity Receiver 1.0.0.13
    • ULXD4 ULXD Receiver 1.2.14
    • P10T PSM1000 Transmitter 1.3.4
    • Wireless Workbench 6 Beta version 6.6.1