Archive du logiciel et du firmware

NEW FEATURES

• Networked discovery and coordination of ULXD4D Dual and ULXD4Q Quad receivers.
  • Spectrum Manager discovers, coordinates and deploys frequencies for all ULX-D series receivers.
  • Spectrum Manager identifies ULX-D receivers in High Density mode and maintains frequencies valid for High Density channels.

KNOWN ISSUES

• Very large compatible frequency lists deployed from WWB6 (>400 frequencies) may result in an unsuccessful deployment resulting in the loss of the CFL in the Spectrum Manager. When working with multiple bands of High Density channels it is recommend to unselect “Automatically Calculate Backups” in the WWB6 Coordination Preferences and add an appropriate number of requested backups via the “Add New Devices” dialog.

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.9.2:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4 ULXD Receiver 1.2.14
  • P10T PSM1000 Transmitter 1.3.4
  • Wireless Workbench 6 Beta version 6.4.0 Beta

NEW FEATURES

• Support for third party control interfaces
  • The AXT400 Receiver and AXT900 Rack Charger can be monitored and controlled via command strings. The firmware update enables these devices to be controlled with programmable interfaces such as AMX and Crestron.
  • The technical bulletin which documents the command strings can be found here: http://shure.custhelp.com/app/answers/detail/a_id/...
• Frequency Diversity-Bodypack source indicator
  • When operating in Frequency Diversity-Bodypack mode, the AXT400 receiver now indicates which of the two RF channels is currently selected by the FD switching algorithm as the active source for the audio outputs of the receiver. The indicator ‘On’ appears beneath the ‘FD-Bp’ icon on the front panel display for the active RF channel and the same information is available in the WWB6 Properties Panel and Channel Strip for the receiver. The indicator facilitates troubleshooting if there is an acoustic problem with a microphone.

KNOWN ISSUES

• The Unexpected Transmitter alert function is disabled when Interference Avoidance is set to ‘Off’. Unexpected Transmitter alert is a separate function from Interference Detection which alerts when signal is received from an Axient or UHF-R transmitter that is not linked to the receiver.
• When controlling Axient devices with command strings, only a single socket should be opened per device.

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.9.2:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4x ULX-D Receivers 1.2.14
  • P10T PSM1000 Transmitter 1.3.4
  • Wireless Workbench 6 Beta version 6.4.0 Beta

IMPROVEMENTS

• Improved ShowLink connectivity in environments with high Wi Fi activity
  • Transmitter remote control link is maintained under higher ratios of Wi Fi traffic to ShowLink messages, resulting in fewer instances of transmitters falling offline.

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.9.2:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4 ULXD Receiver 1.2.14
  • P10T PSM1000 Transmitter 1.3.4
  • Wireless Workbench 6 Beta version 6.4.0 Beta

IMPROVEMENTS

• Improved ShowLink connectivity in environments with high Wi Fi activity
  • Transmitter remote control link is maintained under higher ratios of Wi Fi traffic to ShowLink messages, resulting in fewer instances of transmitters falling offline.

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.9.2:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4 ULXD Receiver 1.2.14
  • P10T PSM1000 Transmitter 1.3.4
  • Wireless Workbench 6 Beta version 6.4.0

Version 5.6.41 is compatible to Firmware Release 6.8.9 only and is not compatible with previous firmware versions

New Features

• CDA, Mic display: Group Speech Time is updated to display Group Abbreviation OR Group depending on
• CDA configuration in CAA: Setup / Configuration / CDA configuration / Microphone Display options.
• (Previously only Group was possible).
• CDA, Mic display: Speech time limit for the group can be displayed if selected.
• General: Group Abbreviation expanded to 7 characters.
• CAA: Updated to handle Group Abbreviations with up to 7 characters when importing a meeting.
• ECA: Support for Speech time alarm/time expired status

Bug fixes

• CAA: Russian error after adding 2'nd language
• CAA: Reports problem with unicode/ Georgian error
• CAA: WEB service setup -TAB order is incorrect
• CAA: Disabling "External Validation" for seat inserts DBNull instead of 0 in database
• CAA: Cannot delete AO + AM units
• CUA, AO control screen: Volume controls missing in
• CUA: Blank screen when conference is started or stopped
• CUA: Mimic exception fault
• CUA: Pre-recorded message list are not updated during a meeting
• CAA: Adding a new message causes the last delegate to be highlighted
• CUA: Exception - when adjusting mic volume on mimic
• CUA: Mimic error when starting/stopping conference
• CUA: Mimic and use of "show secondary User Type" user type
• CUA: Exception - after adding long pre-recorded messages
• CUA: Object ref. error / exception when adjusting volume
• CUA: Mimic "login window" are not closed, when conference is closed
• CUA: Message scroll bar is jumping a lot
• CUA: IS "mic on" control from technician mimic. cause "object ref. not set...." error
• CUA: Mic attenuation on volume control page has wrong values
• CUA: Exception when closing conference
• CUA: mimic "out of memory" exception
• CDA Indv. Results: Total Voting results missing
• CDA: Not showing interim results at some voting screens
• Changing CUA user type mess up first voting
• Units with No login capabilities (NO CUA or CC) are not logged in
• Alert message to be defined when secret voting selected
• Object ref not set - error "91"
• Installation errors 5.6.31 framework 3.5
• Error when removing chip cards
• "Overwrite message?" dialog when delegates log out
• Close mic on speech timeout not working
• Operator '=' is not defined for type 'DBNull' and type 'DUALUNIT

New Features

• Showing of voting cast in secret voting implemented in CAA, CDA, CUA mimic and in voting reports
• CAA "Agenda subject configuration" added
• Secondary speech timer when main timer is paused
• ‘One speech/Subject’
• Request time limit
• New CUA resolutions min 1280 x 800
• Changed CUA resolution, min 1920x1200 changed to min 1920x1080
• “Request List Closed” shown if the request list is closed manually
• Reset request time function
• Win Installation log can be viewed after installation
• CUI improvements when handling STF
• SW versions added in CUI log files
• Warning when user is trying to overwrite backup file

Bug Fix

• Voting report (Individual) corrected (results and labels)
• DC 6990P configured as dual units cannot logout
• CDA speech time error in Groups and 'header' font type
• Voting graph configuration: Not possible to set CDA/CUA voting width
• CDA remaining voting time are drifting away from CUA
• Chairman in not identified as chairman, when Secondary seat is used
• Improvements when using replacing mic. function in CAA setup equipment, conference units menu
• Error in CDA Mimic, when showing interpreter language, corrected

Improvements

• Fixed an IR Syncing issue with certain screen brightness settings

Known Issues

• Custom group creation from Wireless Workbench may be limited to certain channel counts for the following bands (NOTE: not an issue when editing custom groups from the front panel of the receiver)
  • AB
  • JA
  • JB
  • Q51
  • R51
  • X50

Notes

• For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.0.7:
  • ULXD1/2 ULXD Transmitters 1.0.3
  • ULXD4 ULX-D Receivers 1.0.7
  • Wireless Workbench 6 Beta version 6.2.1

IMPROVEMENTS

• Improved IR sync protocol
• Added support for X2 band

NOTES

• For operation of PSM1000 devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with PSM1000 version 1.3.2:
  • Axient devices 1.9.2
  • ULX-D devices 1.0.7
  • Wireless Workbench 6 Beta version 6.4.0

Improvements

• Added support for X2 band for use in Korea

Notes

• For operation of PSM1000 devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with PSM1000 version 1.3.4:
  • Axient devices 1.8.8
  • ULX-D devices 1.0.3
  • Wireless Workbench 6 Beta version 6.3.0

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.8.8:
  • UR4 UHF-R receiver - 1.166
  • UR3 Plug-on Transmitter - 1.0.0.9
  • UR5 Portable Diversity Receiver - 1.0.0.13
  • ULXD4 ULXD Receiver - 1.0.3
  • P10T PSM1000 Transmitter - 1.3.4 Beta
  • Wireless Workbench - 6.3.0 Beta