Archive du logiciel et du firmware

Important

V5.8.66 is compatible with Firmware Release 7.2.0 or later only

New Features

• Supports for 1-5 voting button on CUA Application and DC 6990 P
• SW 6125 Advanced Speech Time Module now support showing of Group Speech Time Summary in CUA-Microphone Screen

Important

• V5.8.48 is compatible with Firmware Release 7.1.0 only
• SW 6000 support for Win XP is discontinued and any Win XP specific errors will not be corrected. No tests has been conducted on Win XP.

New Features

• New designed CUI interface with choice of TCP/IP connection for CU 6105 / CU 6110 or RS232 connection for to CU 6005 / CU 6010 / CU 6011
• New designed CUA Volume Control page corresponding to the CU 6105 Central Unit

SW 6132 Advanced Import/Export Module expansion:

• Conference import/export using WebService (CAA)
• Conference import/export mode selection: XML file or WebService

SW 6112 Advanced Agenda Control expansion:

• Hyper Links in CAA Agenda Subjects
• Hyper Links in CUA Agenda Subjects
• Browser in CUA

Improvements & bug fixes

• Manual typed voting result: 'Attendance/Totalpresent values not shown correctly and not included in the quorum formula
• Enhanced detection of pre- installed database during installation
• Upgrade from .NET 3.5 to .NET 4.0
• Notorious improvements, corrections and bug fixes

Note

Viewing PDF and Word documents in CUA

If the PC is using 64-bit operating system, a 64-bit PDF and Word viewer must be used or the document will not open inside the CUA.

• PDF-XChange viewer is recommended and can be used for both 32- and 64-bit PCs
• To easily detect CUs, install Bonjour before initial CUI configuration. Get Bonjour at http://support.apple.com/kb/DL999?viewlocale=en_US

Important

• V5.8.48 is compatible with Firmware Release 7.1.0 only
• SW 6000 support for Win XP is discontinued and any Win XP specific errors will not be corrected. No tests has been conducted on Win XP.

New Features

• New designed CUI interface with choice of TCP/IP connection for CU 6105 / CU 6110 or RS232 connection for to CU 6005 / CU 6010 / CU 6011
• New designed CUA Volume Control page corresponding to the CU 6105 Central Unit

SW 6132 Advanced Import/Export Module expansion:

• Conference import/export using WebService (CAA)
• Conference import/export mode selection: XML file or WebService

SW 6112 Advanced Agenda Control expansion:

• Hyper Links in CAA Agenda Subjects
• Hyper Links in CUA Agenda Subjects
• Browser in CUA

Improvements & bug fixes

• Manual typed voting result: 'Attendance/Totalpresent values not shown correctly and not included in the quorum formula
• Enhanced detection of pre- installed database during installation
• Upgrade from .NET 3.5 to .NET 4.0
• Notorious improvements, corrections and bug fixes

Note

Viewing PDF and Word documents in CUA

If the PC is using 64-bit operating system, a 64-bit PDF and Word viewer must be used or the document will not open inside the CUA.

• PDF-XChange viewer is recommended and can be used for both 32- and 64-bit PCs
• To easily detect CUs, install Bonjour before initial CUI configuration. Get Bonjour at http://support.apple.com/kb/DL999?viewlocale=en_US

KNOWN ISSUES

• When controlling Axient devices with command Strings, only a single socket should be opened per device.

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.10.2:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4 ULXD Receiver 1.2.14
  • P10T PSM1000 Transmitter 1.3.4
  • Wireless Workbench 6 Beta version 6.5.0 Beta

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.10.2:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4 ULXD Receiver 1.2.14
  • P10T PSM1000 Transmitter 1.3.4
  • Wireless Workbench 6 Beta version 6.5.0

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.10.2:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4 ULXD Receiver 1.2.14
  • P10T PSM1000 Transmitter 1.3.4
  • Wireless Workbench 6 Beta version 6.5.0

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.10.2:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4 ULXD Receiver 1.2.14
  • P10T PSM1000 Transmitter 1.3.4
  • Wireless Workbench 6 Beta version 6.5.0

NEW FEATURES

• Tone key selection options to allow only Axient or only UHF-R transmitters for receiver audio
  • Additional options to protect the receiver from unintended transmitters
  • Default Tone Key setting automatically detects Axient or UHF-R tone key to activate the corresponding audio scheme
  • In Frequency Diversity – Bodypack mode, the receiver selects away from a radio channel receiving the wrong tone key
• In Ear Monitor signal detection
  • The receiver can identify signals from In Ear monitor transmitters, triggering Interference Detection and Avoidance even in FM capture scenarios where the IEM carrier is much stronger than the desired signal
  • Alerts in ‘Prompt’ Interference Detection mode indicate that the interfering signal is from an IEM system
  • Detects all Shure and most competitive IEM systems

IMPROVEMENTS

• Confirmation for interference-prompted frequency switches when transmitter is offline
  • Additional prompt to avoid unintentionally changing frequency when a linked transmitter is not online to follow the change

KNOWN ISSUES

• When controlling Axient devices with command Strings, only a single socket should be opened per device.

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.10.2:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4x ULX-D Receivers 1.2.14
  • P10T PSM1000 Transmitter 1.3.4
  • Wireless Workbench 6 Beta version 6.5.0

NEW FEATURES

• Transmitter Overload indicator
  • Indication from the transmitter is available via ShowLink when the audio input circuitry is overloaded. Previously displayed only on the transmitter, this alert now appears on the AXT400 front panel display and is available in Wireless Workbench 6 monitoring views when the transmitter is online.

IMPROVEMENTS

• Confirmation for interference-prompted frequency switches when transmitter is offline
  • Additional prompt to avoid unintentionally changing frequency when a linked transmitter is not online to follow the change

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.10.2:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4 ULXD Receiver 1.2.14
  • P10T PSM1000 Transmitter 1.3.4
  • Wireless Workbench 6 Beta version 6.5.0 Beta

NEW FEATURES

• Transmitter Overload indicator
  • Indication from the transmitter is available via ShowLink when the audio input circuitry is overloaded. Previously displayed only on the transmitter, this alert now appears on the AXT400 front panel display and is available in Wireless Workbench 6 monitoring views when the transmitter is online.

IMPROVEMENTS

• Confirmation for interference-prompted frequency switches when transmitter is offline
  • Additional prompt to avoid unintentionally changing frequency when a linked transmitter is not online to follow the change

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.10.2:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4 ULXD Receiver 1.2.14
  • P10T PSM1000 Transmitter 1.3.4
  • Wireless Workbench 6 Beta version 6.5.0