Firmware

ANI4IN - Audio Network Interface (Dante Only)

Versions

Date Posted

Download

4.3.7
November 23, 2020
Download with SUU open_in_new

Improvements

  • Bug fixes

Known Issues

  • AES67 support is only available on UltimoX hardware
  • ANI4IN devices manufactured as of January 2018 are compatible with AES67
  • When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
  • Shure Network Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware to use this feature

Notes

  • User Guide
  • Command Strings
  • ANI4IN version 4.3.7 is compatible with ANI4IN devices running older firmware versions, but updating all devices used together to the same firmware version is recommended.
  • To operate ANI4IN version 4.1.7 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
  • To operate ANI4IN version 4.1.7 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI22 4.3.7
    • ANI4OUT 4.3.7
    • ANIUSB-MATRIX 4.3.11
    • MXA310 4.3.6
    • MXA910 4.3.2
    • Microflex Wireless 8.0.3
    • P300 4.3.7
    • ULXD4D/4Q 2.4.9
    • SCM820 1.3.3
    • Shure Update Utility 2.5.0
    • Shure Web Device Discovery 1.2.9
4.2.18
July 22, 2020
Download with SUU open_in_new

Bug Fixes

  • Failure to clear the encryption key when encryption is disabled

Known Issues

  • Factory reset occasionally fails to reset Dante settings and/or fully disable encryption. Solution: Reboot the device if unable to route audio after factory reset
  • AES67 support is only available on UltimoX hardware
    • ANI4IN devices manufactured as of July 2017January 2018 are compatible with AES67
  • When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
  • Shure Network Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware to use this feature

Notes

  • User Guide
  • Command Strings
  • ANI4IN version 4.2.18 is compatible with ANI4IN devices running version 4.2.18 and below, but updating all devices used together to the same firmware version is recommended.
  • To operate ANI4IN version 4.2.18 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
  • To operate ANI4IN version 4.2.184.1.39 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI22 4.2.18
    • ANI4OUT 4.2.18
    • ANIUSB-MATRIX 4.2.19
    • MXA310 4.2.18
    • MXA910 4.2.18
    • Microflex Wireless 8.0.3
    • P300 4.2.4
    • ULXD4D/4Q 2.4.9
    • SCM820 1.3.3
    • Shure Update Utility 2.4.8
    • Shure Web Device Discovery 1.2.9
4.1.39
February 11, 2020
Download with SUU open_in_new

New Features

  • Support for Dante Domain Manager
  • Support for Dante Device Lock
  • Support for AES67

Improvements

  • For enhanced security, first-time user interface access will prompt the user to set up a passphrase. Users have the option of continuing without a passphrase, allowing for Shure Designer configuration software to securely configure the device within a location.
    • Passphrase length must be at least 8 characters up to a maximum of 64, all characters allowed
    • The passphrase may be disabled after the first login
    • Downgrade caution:
      • After the 4.1.37 upgrade, the device’s new passphrase (and/or its audio encryption passphrase) might exceed the allowed length of its prior firmware version. In that case, downgrading requires the following procedure to ensure passphrase compatibility:
        • Prior to downgrading, log in and disable the passphrase(s) or the change the passphrase(s) to the character length allowed by the prior firmware to be downgraded to.
        • Perform the firmware downgrade. Enable passphrase(s) as desired.
    • Using Designer software:
  • When multiple devices at different firmware levels are put into a location using Shure Designer software, the location passphrase for those devices must abide by the length and character set limitations of the older firmware. Advice: Update all devices in the location to the latest firmware in order to use a more robust passphrase.

Bug Fixes

  • Fixed an issue where there was the potential for a loss of audio after a power cycle when using Static IP setting.

Known Issues

  • AES67 support is only available on UltimoX hardware
    • ANI4IN devices manufactured as of January 2018 are compatible with AES67
  • When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
  • Shure Network Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware to use this feature

Notes

  • User Guide
  • Command Strings
  • ANI4IN version 4.1.39 is compatible with ANI4IN devices running version 4.1.39 and below, but updating all devices used together to the same firmware version is recommended.
  • To operate ANI4IN version 4.1.39 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
  • To operate ANI4IN version 4.1.39 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI22 4.1.39
    • ANI4OUT 4.1.39
    • ANIUSB-MATRIX 4.1.39
    • MXA310 4.1.37
    • MXA910 4.1.41
    • Microflex Wireless 8.0.3
    • P300 4.1.11
    • ULXD4D/4Q 2.4.9
    • SCM820 1.3.3
    • Shure Update Utility 2.4.6
    • Shure Web Device Discovery 1.2.5
2.0.18
December 18, 2017
cloud_download
Download Pack File (Manual Installation)

Improvement

  • Reduces the loading time over VPN for the web-based graphical user interface (GUI)

Known Issue

  • When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

  • User Guide
  • Command Strings
  • ANI4IN version 2.0.18 is compatible with ANI4IN devices running version 2.0.18 and below, but it is recommended to update all devices used together to the same firmware version.
  • To operate ANI4IN version 2.0.18 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
  • To operate ANI4IN version 2.0.18 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI22 2.0.18
    • ANI4OUT 2.0.18
    • ANIUSB-MATRIX 2.0.19
    • MXA310 2.0.19
    • MXA910 2.0.19
    • Microflex Wireless 5.1.26
    • ULXD4D/4Q 2.1.16
    • SCM820 1.3.3
    • Shure Update Utility 2.4.1
    • Shure Web Device Discovery 1.1
2.0.7
June 30, 2017
cloud_download
Download Pack File (Manual Installation)

New Features

  • Audio Encryption support with MXA910, MXA310, ANI4IN, ANI4OUT, ANIUSB-MATRIX, ANI22 and P300-IMX.
  • Packet Bridge
  • PEQ copy/paste and import/export options

Improvements

  • Integrates Audinate's Dante™ Ultimo firmware update, which resolves a rare audio loss issue that can occur when devices are static for longer than 1 month.
  • Configuration
    • PEQ tab added
  • Presets
    • "Default Settings" added as a preset
    • Name of the active preset displays above the Preset drop-down
    • "Clear Preset" option added to "Save As Preset"
  • Device names can now begin with a number
  • New commands strings
  • Fixed an IP configuration issue in manual mode that prevents setting IP address w.x.y.z with subnet mask 255.0.0.0 for class A networks.
  • General bug fixes

Known Issue

  • When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

  • ANI4IN: User Guide | Command Strings
  • ANI4IN version 2.0.7 is compatible with ANI4IN devices running version 2.0.7 and below, but it is recommended to update all devices used together to the same firmware version.
  • To operate ANI4IN version 2.0.7 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
  • To operate ANI4IN version 2.0.7 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI4IN 2.0.7
    • ANI4OUT 2.0.8
    • MXA910 2.0.8
    • Microflex Wireless 5.1.23
    • ULXD4D/4Q 2.1.16
    • SCM820 1.3.3
    • Shure Update Utility 2.3.0.18
    • Shure Web Device Discovery 1.1
1.2.6
December 1, 2016
cloud_download
Download Pack File (Manual Installation)

Improvements

  • Network Audio LED turns off when no Dante Channels are routed
  • Push to Dante feature now appends a -d to the Dante Device Name, preventing discovery issues
  • Bug fixes

Known Issue

  • When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

  • ANI4IN version 1.2.6 is compatible with microphones running version 1.2.6 and below, but it is recommended to update all devices used together to the same firmware version.
  • For operation of ANI4IN version 1.2.6 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI4OUT 1.1.6
    • MXA310 1.1.4
    • MXA910 1.1.3
    • Microflex Wireless 4.0.7
    • ULXD4 1.7.34
    • ULXD4Q 1.7.34
    • SCM820 1.3.3
    • Shure Update Utility 2.2.2
    • Shure Web Device Discovery 1.0.18
1.1.6
July 8, 2016
cloud_download
Download Pack File (Manual Installation)

New Feature

  • Initial release

Associated products

ANI4IN

ANI4IN

Converts up to four line / mic analog signals onto a Dante network for easy audio routing and browser-based control.