Software & Firmware Archives

Improvements

• Support for added hardware revisions

Notes

• User Guide
• Information about the hardware revision is displayed in the UTILITY > VERSION menu
• To operate this version of ULX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • ULXD 2.8.6
  • Axient AXT600 Spectrum Manager 2.1.41
  • Shure Update Utility 2.8.3
  • ShurePlus Channels iOS 1.6.1
  • ShurePlus Channels Android 1.6.2
  • Wireless Workbench 6.15.4 or 7.0.0

Improvements

• Support for added hardware revisions

Important

• ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Notes

• User Guide
• To update firmware for ULXD6/8 transmitters with ULX-D or QLX-D receivers:
  1. Update receivers to the following minimum versions:
     • ULXD4, ULXD4D, and ULXD4Q Receivers 2.1.16 or higher
     • QLXD4 Receivers 2.1.5 or higher
  2. Using Shure Update Utility, download ULXD6/8 transmitter firmware to the receivers.
  3. Using the FW Update menu on a receiver, update transmitters.
• To update ULXD6/8 transmitters firmware while they are docked in an SBC250/450/850 Networked Charging Station:
  1. Place transmitters on charging station and ensure charging station is connected to the network.
  2. Launch Shure Update Utility to find firmware updates.
  3. Download updates and select Send Updates.
• To operate this version of ULXD6/8 devices with other Shure networked systems and software, see the following list of recommended versions:
  • ULXD 2.8.6
  • QLXD 2.7.1
  • SBC250/450/850 Networked Charging Stations 2.8.6
  • Shure Update Utility 2.8.3
  • ShurePlus Channels iOS 1.6.1
  • ShurePlus Channels Android 1.6.2
  • Wireless Workbench 6.15.4 or 7.0.0

Improvements

• Support for added hardware revisions

Important

• ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Notes

• User Guide
• To update firmware for ULXD6/8 transmitters with ULX-D or QLX-D receivers:
  1. Update receivers to the following minimum versions:
     • ULXD4, ULXD4D, and ULXD4Q Receivers 2.1.16 or higher
     • QLXD4 Receivers 2.1.5 or higher
  2. Using Shure Update Utility, download ULXD6/8 transmitter firmware to the receivers.
  3. Using the FW Update menu on a receiver, update transmitters.
• To update ULXD6/8 transmitters firmware while they are docked in an SBC250/450/850 Networked Charging Station:
  1. Place transmitters on charging station and ensure charging station is connected to the network.
  2. Launch Shure Update Utility to find firmware updates.
  3. Download updates and select Send Updates.
• To operate this version of ULXD6/8 devices with other Shure networked systems and software, see the following list of recommended versions:
  • ULXD 2.8.6
  • QLXD 2.7.1
  • SBC250/450/850 Networked Charging Stations 2.8.6
  • Shure Update Utility 2.8.3
  • ShurePlus Channels iOS 1.6.1
  • ShurePlus Channels Android 1.6.2
  • Wireless Workbench 6.15.4 or 7.0.0

Notes 

• User Guides: SBC250 | SBC450/850
• To set up ULXD6/8 transmitters to receive firmware updates while docked in SBC250/450/850 Networked Charging Stations, follow these steps:
  1. Place transmitters on a charging station and ensure the charging station is connected to the network.
  2. Launch Shure Update Utility to find firmware updates.
  3. Download updates and select Send Updates.
• To operate this version of SBC250/450/850 with other Shure networked systems and software, see the following list of recommended versions:
  • ULX-D 2.8.6
  • Shure Update Utility 2.8.3
  • Wireless Workbench 6.15.4 or 7.0.0

Recommendation

• Update all QLX-D devices in a configuration to the same firmware version.

Important

• QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

• Support for added hardware revisions

Notes

• User Guide
• To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
• To operate this version of QLX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • AXT600 Axient Spectrum Manager 2.1.41
  • PSM1000 P10T Transmitters 1.8.6
  • ULX-D 2.7.6
  • Wireless Workbench 6.15.4 or 7.0.0
  • Shure Update Utility 2.8.3
  • ShurePlus Channels iOS 1.6.1
  • ShurePlus Channels Android 1.6.2

Recommendation

• Update all QLX-D devices in a configuration to the same firmware version.

Important

• QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

• Support for added hardware revisions

Notes

• User Guide
• To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
• To operate this version of QLX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • AXT600 Axient Spectrum Manager 2.1.41
  • PSM1000 P10T Transmitters 1.8.6
  • ULX-D 2.7.6
  • Wireless Workbench 6.15.4 or 7.0.0
  • Shure Update Utility 2.8.3
  • ShurePlus Channels iOS 1.6.1
  • ShurePlus Channels Android 1.6.2

Recommendation

• Update all QLX-D devices in a configuration to the same firmware version.

Important

• QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

• Support for added hardware revisions

Notes

• User Guide
• To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
• To operate this version of QLX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • AXT600 Axient Spectrum Manager 2.1.41
  • PSM1000 P10T Transmitters 1.8.6
  • ULX-D 2.7.6
  • Wireless Workbench 6.15.4 or 7.0.0
  • Shure Update Utility 2.8.3
  • ShurePlus Channels iOS 1.6.1
  • ShurePlus Channels Android 1.6.2

Recommendation

• Update all QLX-D devices in a configuration to the same firmware version.

Important

• QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

• Support for added hardware revisions

Notes

• User Guide
• To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
• To operate this version of QLX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • AXT600 Axient Spectrum Manager 2.1.41
  • PSM1000 P10T Transmitters 1.8.6
  • ULX-D 2.7.6
  • Wireless Workbench 6.15.4 or 7.0.0
  • Shure Update Utility 2.8.3
  • ShurePlus Channels iOS 1.6.1
  • ShurePlus Channels Android 1.6.2

Recommendation

• Update all QLX-D devices in a configuration to the same firmware version.

Important

• QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

• Support for added hardware revisions

Notes

• User Guide
• To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
• To operate this version of QLX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • AXT600 Axient Spectrum Manager 2.1.41
  • PSM1000 P10T Transmitters 1.8.6
  • ULX-D 2.7.6
  • Wireless Workbench 6.15.4 or 7.0.0
  • Shure Update Utility 2.8.3
  • ShurePlus Channels iOS 1.6.1
  • ShurePlus Channels Android 1.6.2

Recommendation

• Update all QLX-D devices in a configuration to the same firmware version.

Important

• QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

• Support for added hardware revisions

Notes

• User Guide
• To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
• To operate this version of QLX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • AXT600 Axient Spectrum Manager 2.1.41
  • PSM1000 P10T Transmitters 1.8.6
  • ULX-D 2.7.6
  • Wireless Workbench 6.15.4 or 7.0.0
  • Shure Update Utility 2.8.3
  • ShurePlus Channels iOS 1.6.1
  • ShurePlus Channels Android 1.6.2