Firmware

ANI22 - Audio Network Interface

Versions

Date Posted

Download

4.3.7
November 23, 2020

Improvements

  •  Bug fixes

Known Issues

  • When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
  • Shure Network Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware to use this feature

Notes

  • User Guide
  • Command Strings
  • ANI22 version 4.3.7 is compatible with ANI22 devices running older firmware versions, but updating all devices used together to the same firmware version is recommended.
  • To operate ANI22 version 4.1.39 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (macOS)
  • To operate ANI22 version 4.3.7 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI4IN 4.3.7
    • ANI4OUT 4.3.7
    • ANIUSB-MATRIX 4.3.11
    • MXA310 4.3.6
    • MXA910 4.3.2
    • Microflex Wireless 8.0.3
    • ULXD4D/4Q 2.4.9
    • SCM820 1.3.3
    • Shure Update Utility 2.5.0
    • Shure Web Device Discovery 1.2.9
4.2.18
July 22, 2020

Improvement

  • Logic improvement

Bug Fixes

  • Removed Logic Inverter option.Fixed an issue where there was the potential for a loss of audio after a power cycle when using Static IP setting.
  • Failure to clear the encryption key when encryption is disabled

Known Issues

  • Factory reset occasionally fails to reset Dante settings and/or fully disable encryption. Solution: Reboot the device if unable to route audio after factory reset
  • When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
  • Shure Network Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware to use this feature

Notes

  • User Guide
  • Command Strings
  • ANI22 version 4.2.18 is compatible with ANI22 devices running version 4.2.18 and below, but updating all devices used together to the same firmware version is recommended.
  • To operate ANI22 version 4.2.18 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (macOS)
  • To operate ANI22 version 4.2.18 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI4IN 4.2.18
    • ANI4OUT 4.2.18
    • ANIUSB-MATRIX 4.2.19
    • MXA310 4.2.18
    • MXA910 4.2.18
    • P300 4.2.4
    • Microflex Wireless 8.0.3
    • ULXD4D/4Q 2.4.9
    • SCM820 1.3.3
    • Shure Update Utility 2.4.8
    • Shure Web Device Discovery 1.2.9
4.1.39
February 11, 2020

New Features

  • Support for Dante Domain Manager
  • Support for Dante Device Lock
  • Support for AES67

Improvements

  • For enhanced security, first-time user interface access will prompt the user to set up a passphrase. Users have the option of continuing without a passphrase, allowing for Shure Designer configuration software to securely configure the device within a location.
    • Passphrase length must be at least 8 characters up to a maximum of 64, all characters allowed
    • The passphrase may be disabled after the first login
    • Downgrade caution:
      • After the 4.1.37 upgrade, the device’s new passphrase (and/or its audio encryption passphrase) might exceed the allowed length of its prior firmware version. In that case, downgrading requires the following procedure to ensure passphrase compatibility:
        • Prior to downgrading, log in and disable the passphrase(s) or the change the passphrase(s) to the character length allowed by the prior firmware to be downgraded to.
        • Perform the firmware downgrade. Enable passphrase(s) as desired.
    • Using Designer software:
  • When multiple devices at different firmware levels are put into a location using Shure Designer software, the location passphrase for those devices must abide by the length and character set limitations of the older firmware. Advice: Update all devices in the location to the latest firmware in order to use a more robust passphrase.

Bug Fixes

  • Fixed an issue where there was the potential for a loss of audio after a power cycle when using Static IP setting.

Known Issues

  • When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
  • Shure Network Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware to use this feature

Notes

  • User Guide
  • Command Strings
  • ANI22 version 4.1.39 is compatible with ANI22 devices running version 4.1.39 and below, but updating all devices used together to the same firmware version is recommended.
  • To operate ANI22 version 4.1.39 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (macOS)
  • To operate ANI22 version 4.1.39 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI4IN 4.1.39
    • ANI4OUT 4.1.39
    • ANIUSB-MATRIX 4.1.39
    • MXA310 4.1.37
    • MXA910 4.1.41
    • Microflex Wireless 8.0.3
    • ULXD4D/4Q 2.4.9
    • SCM820 1.3.3
    • Shure Update Utility 2.4.6
    • Shure Web Device Discovery 1.2.5
2.0.18
December 18, 2017

Improvement

  • Reduces the loading time over VPN for the web-based graphical user interface (GUI)

Known Issue

  • When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

  • User Guide
  • ANI22 version 2.0.18 is compatible with ANI22 devices running version 2.0.18 and below, but updating all devices used together to the same firmware version is recommended.
  • To operate ANI22 version 2.0.18 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
  • To operate ANI22 version 2.0.18 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI4IN 2.0.18
    • ANI4OUT 2.0.18
    • ANIUSB-MATRIX 2.0.19
    • MXA310 2.0.19
    • MXA910 2.0.19
    • Microflex Wireless 5.1.26
    • ULXD4D/4Q 2.1.16
    • SCM820 1.3.3
    • Shure Update Utility 2.4.1
    • Shure Web Device Discovery 1.1
2.0.11
August 31, 2017

New Features

  • Initial firmware for ANI22

Notes

  • To operate ANI22 version 2.0.11 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
  • To operate ANI22 version 2.0.11 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI4IN 2.0.7
    • ANI4OUT 2.0.8
    • MXA310 2.0.7
    • MXA910 2.0.8
    • Microflex Wireless 5.1.23
    • SCM820 1.3.3
    • Shure Update Utility 2.4
    • Shure Web Device Discovery 1.1

Associated products

ANI22

Audio network interface converts up to 2 line or mic signals from a Dante network for easy audio routing and convenient browser-based remote control.