ANI4OUT - オーディオ・ネットワーク・インターフェース（Danteのみ）

Improvements

• Enhancements to support Designer 6.0.0
• Additional hardware support

Known Issues

• AES67 support is only available on UltimoX hardware
  • ANI4OUT devices manufactured as of January 2018 are compatible with AES67
• In AES67 mode - Audio does not pass after changing Dante Device name, followed by a reboot
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• User Guide
• Command Strings
• To operate this version of ANI4OUT with Dante Controller, reference the following minimum versions:
  • v3.10.2.4 (Windows)
  • v3.10.2.3 (Mac OS X)
• Updating all devices used together to the same firmware version is recommended.
• To operate this version of ANI4OUT with other Shure networked systems, reference the following list of recommended versions supported:
  • ANI22/ANI4IN/ANI4OUT 6.0.41
  • ANIUSB 6.0.44
  • MXA310 6.0.23
  • MXA910 6.0.24
  • MXA920 6.0.38
  • MXA901 6.0.39
  • MXA902 6.0.32
  • MXW 10.0.X
  • P300 6.0.38
  • ULXD4D/4Q 2.8.7
  • SCM820 1.4.3
  • Shure Update Utility 2.8.4
  • Shure Web Device Discovery 1.2.17

Improvements

• Bug fixes

Known Issues

• AES67 support is only available on UltimoX hardware
  • ANI4OUT devices manufactured as of January 2018 are compatible with AES67
• In AES67 mode - Audio does not pass after changing Dante Device name, followed by a reboot
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
• Shure Network Audio Encryption is not backward compatible; all devices must be on version 4.1 firmware to use this feature
• When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 4.3 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving.
  • Workaround: hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari)

Notes

• User Guide
• Command Strings
• To operate this version of ANI4OUT with Dante Controller, reference the following minimum versions:
  • v3.10.2.4 (Windows)
  • v3.10.2.3 (Mac OS X)
• Updating all devices used together to the same firmware version is recommended.
• To operate this version of ANI4OUT with other Shure networked systems, reference the following list of recommended versions supported:
  • ANI22 4.7.6
  • ANI4IN 4.7.6
  • ANIUSB-MATRIX 4.7.16
  • MXA310 4.7.8
  • MXA910 4.7.13
  • Microflex Wireless 10.0.6
  • P300 4.7.11
  • ULXD4D/4Q 2.6.3
  • SCM820 1.4.3
  • Shure Update Utility 2.7.1
  • Shure Web Device Discovery 1.2.17

Improvements

• Bug fixes

Known Issues

• AES67 support is only available on UltimoX hardware
  • ANI4OUT devices manufactured as of January 2018 are compatible with AES67
• In AES67 mode - Audio does not pass after changing Dante Device name, followed by reboot
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
• Shure Network Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware to use this feature
• When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 4.3 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period.
  • Workaround: hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari)

Notes

• User Guide
• Command Strings
• This version of ANI4OUT is compatible with ANI4OUT devices running older firmware versions, but updating all devices used together to the same firmware version is recommended.
• To operate this version of ANI4OUT with Dante Controller, reference the following minimum versions:
  • v3.10.2.4 (Windows)
  • v3.10.2.3 (Mac OS X)
• To operate this version of ANI4OUT with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI22 4.6.6
  • ANI4IN 4.6.6
  • ANIUSB-MATRIX 4.6.7
  • MXA310 4.6.3
  • MXA910 4.6.6
  • Microflex Wireless 9.0.4
  • P300 4.6.6
  • ULXD4D/4Q 2.5.0
  • SCM820 1.4.3
  • Shure Update Utility 2.6.1
  • Shure Web Device Discovery 1.2.17

New Features 

• Services – ability to configure network services

Improvements 

• Bug fixes

Known Issues 

• AES67 support is only available on UltimoX hardware
  • ANI4OUT devices manufactured as of January 2018 are compatible with AES67
• In AES67 mode - Audio does not pass after changing Dante Device name, followed by reboot
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
• Shure Network Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware to use this feature
• When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 4.3 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period.
  • Workaround: hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari)

Notes 

• User Guide
• Command Strings
• This version of ANI4OUT is compatible with ANI4OUT devices running older firmware versions, but updating all devices used together to the same firmware version is recommended.
• To operate this version of ANI4OUT with Dante Controller, reference the following minimum versions:
  • v3.10.2.4 (Windows)
  • v3.10.2.3 (Mac OS X)
• To operate this version of ANI4OUT with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI22 4.5.22
  • ANI4IN 4.5.22
  • ANIUSB-MATRIX 4.5.23
  • MXA310 4.5.8
  • MXA910 4.5.8
  • Microflex Wireless 9.0.4
  • P300 4.5.13
  • ULXD4D/4Q 2.5.0
  • SCM820 1.4.3
  • Shure Update Utility 2.6.1
  • Shure Web Device Discovery 1.2.9

Bug Fix

• Fixed an issue where there was the potential for a loss of audio after a power cycle when using Static IP setting.

Known Issues

• AES67 support is only available on UltimoX hardware
• ANI4OUT devices manufactured as of January 2018 are compatible with AES67
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
• Shure Network Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware to use this feature

Notes

• User Guide
• Command Strings
• ANI4OUT version 4.4.8 is compatible with ANI4OUT devices running older firmware versions, but updating all devices used together to the same firmware version is recommended.
• To operate ANI4OUT version 4.4.8 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANI4OUT version 4.4.8 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI422 4.4.8
  • ANI4IN 4.4.8
  • ANIUSB-MATRIX 4.4.14
  • MXA310 4.4.9
  • MXA910 4.4.11
  • Microflex Wireless 8.0.3
  • P300 4.4.13
  • ULXD4D/4Q 2.4.25
  • SCM820 1.3.3
  • Shure Update Utility 2.5.1
  • Shure Web Device Discovery 1.2.9

改善点

• スタティックIPを設定して使用している場合、電源を入れ直した後に音声が送受信されない問題を修正しました。
• バグ修正

既知の問題点

• AES67のサポートはUltimoXハードウェアでのみ有効です。
• 2018年1月以降に製造されたANI4OUTデバイスはAES67に対応しています。
• Mac OS上でSafariを使用してプリセットをエクスポートすると、誤ったファイルタイプで保存されます。インポートするには拡張子を.jsonに変更する必要があります。
• Shureネットワーク音声暗号化機能は後方互換性がありません。この機能を使用するには、すべてのデバイスがファームウェアバージョン4.1以上で動作している必要があります。

注記

• ユーザーガイド
• コマンドストリング（英語）
• ANI4OUTバージョン4.3.7は、以前のバージョンのファームウェアで動作するANI4OUTデバイスと互換性がありますが、使用するすべてのデバイスを同じファームウェアにアップデートすることを推奨します。
• ANI4OUTバージョン4.3.7をDante Controllerと使用する場合、Dante Controller v3.10.2.4（Windows）またはv3.10.2.3（Mac OS X）以降が必要です。
• ANI4OUTバージョン4.3.7を他のShureネットワークシステムと運用する場合、以下のバージョン以降が必要です
  • ANI422 4.3.7
  • ANI4IN 4.3.7
  • ANIUSB-MATRIX 4.3.11
  • MXA310 4.3.6
  • MXA910 4.3.2
  • Microflex Wireless 8.0.3
  • P300 4.3.7
  • ULXD4D/4Q 2.4.9
  • SCM820 1.3.3
  • Shure アップデートユーティリティ(SUU)2.5.0
  • Shure Web Device Discovery 1.2.9

Known Issues

• Factory reset occasionally fails to reset Dante settings and/or fully disable encryption. Solution: Reboot the device if unable to route audio after factory reset.AES67 support is only available on UltimoX ha
• AES67 support is only available on UltimoX hardware
• ANI4OUT devices manufactured as of July 2017January 2018 are compatible with AES67
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
• Shure Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware to use this feature

Bug Fixes

• Fixed an issue where there was the potential for a loss of audio after a power cycle when using Static IP setting.
• Failure to clear the encryption key when encryption is disabled

Notes

• User Guide
• Command Strings
• ANI4OUT version 4.2.18 is compatible with ANI4OUT devices running version 4.2.18 and below, but updating all devices used together to the same firmware version is recommended.
• To operate ANI4OUT version 4.2.18 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANI4OUT version 4.2.18 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI422 4.2.18
  • ANI4IN 4.2.18
  • ANIUSB-MATRIX 4.2.19
  • MXA310 4.2.18
  • MXA910 4.2.18
  • Microflex Wireless 8.0.3
  • P300 4.2.4
  • ULXD4D/4Q 2.4.9
  • SCM820 1.3.3
  • Shure Update Utility 2.4.8
  • Shure Web Device Discovery 1.2.9

New Features

• Support for Dante Domain Manager
• Support for Dante Device Lock
• Support for AES67

Improvements

• For enhanced security, first-time user interface access will prompt the user to set up a passphrase. Users have the option of continuing without a passphrase, allowing for Shure Designer configuration software to securely configure the device within a location.
  • Passphrase length must be at least 8 characters up to a maximum of 64, all characters allowed
  • The passphrase may be disabled after the first login
  • Downgrade caution:
    • After the 4.1.37 upgrade, the device’s new passphrase (and/or its audio encryption passphrase) might exceed the allowed length of its prior firmware version. In that case, downgrading requires the following procedure to ensure passphrase compatibility:
      • Prior to downgrading, log in and disable the passphrase(s) or the change the passphrase(s) to the character length allowed by the prior firmware to be downgraded to.
      • Perform the firmware downgrade. Enable passphrase(s) as desired.
  • Using Designer software:
• When multiple devices at different firmware levels are put into a location using Shure Designer software, the location passphrase for those devices must abide by the length and character set limitations of the older firmware. Advice: Update all devices in the location to the latest firmware in order to use a more robust passphrase.

Known Issues

• AES67 support is only available on UltimoX hardware
• ANI4OUT devices manufactured as of January 2018 are compatible with AES67
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
• Shure Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware to use this feature

Bug Fixes

• Fixed an issue where there was the potential for a loss of audio after a power cycle when using Static IP setting.

Notes

• User Guide
• Command Strings
• ANI4OUT version 4.1.39 is compatible with ANI4OUT devices running version 4.1.39 and below, but updating all devices used together to the same firmware version is recommended.
• To operate ANI4OUT version 4.1.39 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANI4OUT version 4.1.39 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI422 4.1.39
  • ANI4IN 4.1.39
  • ANIUSB-MATRIX 4.1.39
  • MXA310 4.1.37
  • MXA910 4.1.41
  • Microflex Wireless 8.0.3
  • P300 4.1.11
  • ULXD4D/4Q 2.4.9
  • SCM820 1.3.3
  • Shure Update Utility 2.4.6
  • Shure Web Device Discovery 1.2.5

Improvement

• Reduces the loading time over VPN for the web-based graphical user interface (GUI)

Known Issue

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• User Guide
• Command Strings
• ANI4OUT version 2.0.18 is compatible with ANI4OUT devices running version 2.0.18 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate ANI4OUT version 2.0.18 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANI4OUT version 2.0.18 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI22 2.0.18
  • ANI4IN 2.0.18
  • ANIUSB-MATRIX 2.0.19
  • MXA310 2.0.19
  • MXA910 2.0.19
  • Microflex Wireless 5.1.26
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.4.1
  • Shure Web Device Discovery 1.1

New Features

• Audio Encryption support with MXA910, MXA310, ANI4IN, ANI4OUT, ANIUSB-MATRIX, ANI22 and P300-IMX.
• Packet Bridge
• PEQ copy/paste and import/export options

Improvements

• Integrates Audinate's Dante™ Ultimo firmware update, which resolves a rare audio loss issue that can occur when devices are static for longer than 1 month.
• Configuration
  • PEQ tab added
• Presets
  • "Default Settings" added as a preset
  • Name of the active preset displays above the Preset drop-down
  • "Clear Preset" option added to "Save As Preset"
• Device names can now begin with a number
• New commands strings
• Fixed an IP configuration issue in manual mode that prevents setting IP address w.x.y.z with subnet mask 255.0.0.0 for class A networks.
• General bug fixes

Known Issue

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• ANI4OUT: User Guide | Command Strings
• ANI4OUT version 2.0.8 is compatible with ANI4OUT devices running version 2.0.8 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate ANI4OUT version 2.0.8 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANI4OUT version 2.0.8 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI4IN 2.0.7
  • ANI4OUT 2.0.8
  • MXA910 2.0.8
  • Microflex Wireless 5.1.23
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.3.0.18
  • Shure Web Device Discovery 1.1

Improvements

• Network Audio LED turns off when no Dante Channels are routed
• Push to Dante feature now appends a -d to the Dante Device Name, preventing discovery issues
• Bug fixes

Known Issue

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• ANI4OUT version 1.2.6 is compatible with microphones running version 1.2.6 and below, but it is recommended to update all devices used together to the same firmware version.
• For operation of ANI4OUT version 1.2.6 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI4IN 1.1.6
  • MXA310 1.1.4
  • MXA910 1.1.3
  • Microflex Wireless 4.0.7
  • ULXD4 1.7.34
  • ULXD4Q 1.7.34
  • SCM820 1.3.3
  • Shure Update Utility 2.2.2
  • Shure Web Device Discovery 1.0.18

Initial release