Designer 6
Software de configuración de sistemas
Designer es un software de configuración de sistemas que permite a los integradores y diseñadores de sistemas configurar, desplegar y montar fácilmente la instalación de sistemas de audio en red compuestos por micrófonos Microflex® Advance, interfaces de audio, procesadores digitales de señal IntelliMix®, altavoces Microflex y accesorios de control. Completamente renovado y rediseñado para simplificar todo el flujo de trabajo y lograr unos diseños más intuitivos, Shure Designer 6 es un software eficaz que agiliza la eficiencia operativa.
NUEVAS FUNCIONES DE DESIGNER 6
- Compatibilidad con Windows y macOS
- Se puede ver, añadir y ajustar el tamaño de las áreas de cobertura
- Posibilidad de guardar la sala online como archivo de diseño
- Nomenclatura simplificada de salas y dispositivos
- Se puede desplegar el diseño de la sala a dispositivos online
- Protocolo 802.1x y funciones adicionales que mejoran la seguridad del sistema
- Mejora de la visualización del encaminamiento del audio con un nuevo modo oscuro para entornos con poca luz
- Vista con pestañas que permite organizar eficazmente los archivos de varias salas o diseños
- Los diseños de sala se pueden guardar como archivos informáticos para almacenarlos y distribuirlos fácilmente
- Posibilidad de almacenar en los dispositivos la información de la sala y de los datos de conexión de los dispositivos
Este software gratuito permite crear diseños de sala utilizando los componentes del ecosistema Microflex y gestionar eficazmente las instalaciones existentes. Puedes configurar la cobertura de audio y el encaminamiento de las señales de manera rápida para luego guardar y compartir los archivos de diseño eficazmente. Designer 6 y las versiones superiores son compatibles con los sistemas operativos Windows y Mac.
Flujo de trabajo intuitivo
Designer se puede utilizar tanto online como offline para diseñar, enrutar, configurar y transferir a dispositivos online, todo ello desde un mismo software.
Archivos compartidos
Las configuraciones de las salas se pueden guardar y compartir con los compañeros de trabajo.
Fácil encaminamiento
Una sola interfaz sirve también para el encaminamiento de audio Dante™.
Software gratuito para descargar.
Encaminamiento de audio en red entre los componentes del ecosistema Microflex.
Creación de plantillas en una sala virtual o conectado a una sala online.
Videos
Designer 6 Videos
Productos compatibles
MXA910
Micrófono de techo Microflex® Advance™
Micrófono de array de techo que ofrece una cobertura de audio configurable e invisible desde el techo, en salas de cualquier tamaño y forma.
MXA MUTE
Botón de silenciamiento en red
Accesorio de botón de silenciamiento configurable, alimentado por PoE diseñado para los productos de audio en red de Shure
ANIUSB-MATRIX
ANIUSB-MATRIX USB Interfaz de red de audio con mezcla matricial
La interfaz de red de audio conecta hasta 4 canales Dante y 1 salida analógica a un sistema de conferencia audiovisual de sala a través de una conexión USB.
IntelliMix P300
Procesador de audio para conferencias
El procesador de audio para conferencias Intellimix P300 ofrece un DSP optimizado para las aplicaciones de videoconferencia.
MXA310
Micrófono de sobremesa Microflex® Advance™
El micrófono de array de mesa utiliza la tecnología Steerable Coverage para tomar un audio cristalino desde mesas de conferencias de varios tamaños y formas.
MXA710
Micrófono Array
Tanto debajo como al lado de un monitor de video montado en la pared, suspendido del techo o empotrado en una mesa, el MXA710 se integra discretamente en la estética de cualquier sala de reuniones, sin sacrificar por ello la captura de audio Premium que se espera de la última incorporación a la innovadora familia Microflex Advance.
MXA920
Micrófono de array de techo
La tecnología Automatic Coverage™ multizona capta la voz de los interlocutores en hasta 8 zonas. La información mejorada sobre la localización de la persona que habla permite un seguimiento de cámara más preciso.
MXA902
Array de techo integrado para conferencias
Combinación de micrófono, altavoz y DSP para realizar conferencias audiovisuales en espacios pequeños y medianos. La tecnología Automatic Coverage™ para 1 zona capta la voz de los interlocutores en un área de 6 por 6 metros.
MXA901
Micrófono de array de techo para conferencias
Su moderno formato redondo de 13,5 pulgadas (34 cm) complementa el diseño de interior de cualquier sala. Utiliza una unidad en las salas más pequeñas o varias unidades en las salas grandes.
Soporte
Customer Support
Service & Repair
Detailed policy information regarding customer service numbers, service modifications, and replacement parts.
Service & RepairContáctanos
Submit a ticket directly to Shure Customer Service staff, or reach out via phone or email.
ContáctanosRecursos
Shure Tech Portal
Documentación completa del producto, material de apoyo técnico, software y firmware, así como herramientas y recursos para los productos Shure, todo desde un mismo lugar.
Iniciar sesiónDocumentación
Manual de Usuario
-
insert_drive_file
Catálogos
-
cloud_download
Notas de versión
Version 6.0.1
Improvements
- Improvement to performance reliability, run-time diagnostics, and retries of deployment
- Enhancement to streamline device firmware updating
PC Requirements
- Supported Operating Systems
- Windows 10 (Professional or Enterprise), 64-bit edition
- Windows 11 (Professional or Enterprise), 64-bit edition
- Minimum Hardware Requirements
- Hard drive: >=5 GB (free space). (SSD 'Solid state' recommended)
- RAM: 8 GB, 16 GB recommended
- Screen: Preferable min. 1920x1080
- Ethernet network connection (not required for installation, but required for working with the application)
- IPv4 network only
- Processor
- 8-generation Core i5 family processor
- 4 physical cores
- 6 threads (logical processors)
- Only Intel and AMD x64 architecture (64-bit) are supported. Arm-based Windows platforms shall not be supported
macOS Requirements
- Supported Operating Systems
- macOS 13.3.1 (Ventura) minimum
- Minimum Hardware Requirements
- Apple M1 or Apple M2 (Intel i5 processor)
- Hard drive: >=5 GB (free space). SSD 'Solid state' recommended) *)
- Physical memory: 8 GB, 16 GB recommended
- Screen: Preferable min. 1920x1080
- Ethernet network connection (not required for installation, but required for working with the application)
- IPv4 network only
Pre-Upgrade Requirements
- Users must export release 4.X project files (with extension .dprj) for import to Designer and conversion to room design files (with extension .rdf)
- Certain endpoint protection software may block the installation of Designer. If you encounter this issue, whitelist the Designer Installer, or application.
Upgrade Path from Designer Classic to Designer 6
- Users must update device firmware from release 4.X / 5.X using Shure Update Utility. Ensure that each device is at the correct firmware version as indicated in the Compatibility section below.
- Download Designer 6 from the Shure website, and then install the application
- Launch the Designer 6 software application
- Go to the Preferences tab
- Select the appropriate NIC to discover all the devices in ecosystem
- Go to the Online devices to validate device firmware
- Perform tasks as desired
Compatibility
- This version of Designer is compatible with the following recommended firmware versions:
- ANIUSB 6.0.44
- MXA310 6.0.23
- MXA710 6.0.24
- MXA910 6.0.24
- MXA920 6.0.38
- MXA901 6.0.39
- MXA902 6.0.32
- MXA-MUTE 6.0.25
- MXN5-C 6.0.17
- P300 6.0.38
- It is imperative to use Shure Update Utility to update all devices to the specified firmware version indicated above.
- PLEASE NOTE: Intellimix Room Audio Processing Software (IMX-Room) is not yet supported in Designer 6. At this time, use Designer 4.7 for IMX-Room designs and deployments.
File Conversion
- Project file conversion from Designer version 3.X is not supported in Designer 6.
- Reference the following steps to convert project files to room design files:
- To export projects from Designer 4.X:
- Open Designer 4.X
- Go to “my projects”
- Click on the 3 dots in right side of your project – select “Export”
- A <your_project_name>.dprj file has been created and saved to default download folder
- To import into Designer 6.0:
- Open Designer 6.0
- Go to “File -> Open”
- Navigate to and select <your_project_name>.dprj
- Import file dialog appears – click “Choose save location”
- Select a folder where the converted room files should be stored e.g <my_rooms>
- Dialog appears that shows all rooms contained in the <your_project_name>.dprj file
- Select all the rooms that you want to import
- Click on “Open selected rooms”
- All rooms selected are now opened in their own tab
- All room files are stored in my_rooms>/<your_project_name>/<room_name>.rdf
- To export projects from Designer 4.X:
Known Issues
- Installer processes may fail during upgrade
- Workaround: Allow the uninstaller process to finish, then restart installation
- After a device firmware installation and a “device version to install” version stops at “Discovering...”
- Workaround: Unplug the POE cable from the device, wait about 5 seconds, and then plug the POE cable back in to restore the device.
- Issue ID# 5935: Default file names may be rejected by Windows or macOS due to operating system file naming constraints.
- Workaround: Rename the file that was saved in Mac and open it in Windows.
- Issue ID# 6263: User may encounter missing devices and routes when trying to open a saved file during deployment flow.
- Workaround: Close and reopen Designer, then try to open the file.
- Issue ID# 6298: When resizing or selecting the coverage area, then trying to reposition it, the coverage may momentarily jump to the original position and then back to the new position.
- Workaround: Rate of occurrence is sporadic, contact Shure Customer Support team for assistance if anomaly is persistent.
- Issue ID# 6394: In the MXA920 S/R, reset to default option is not working as expected when added coverages are hidden one by one after adding them. and then clicking on reset to default option in properties panel.
- Workaround: Switch tabs then return to the coverage tab.
- Issue ID# 6450: Room conflict dialog may not appear in an online password protected room if a device is not online or missing, and user may be unable to remove the missing device.
- Workaround: User must get the missing device online; otherwise, move online devices to a new room.
- Issue ID# 6460: User may encounter a delay on password selection deploying to devices with and without passwords set.
- Workaround: Wait 7-10 seconds for the password selection options to become available.
- Issue ID# 6462: User is unable to set a common device password in an online room when room contains some device with passwords and some devices without passwords.
- Workaround: Use the deployment workflow to set and synchronize the room password. Otherwise, individually remove each device’s password so that all devices are not password protected and reset the room password.
- Issue ID# 6466: When working with Virtual room and not adding or removing a device (i.e. changing a device mute state), device settings will not be saved.
- Workaround: Save the design file manually after configuring settings.
- Issue ID# 6470: In the coverage view, the MXA310 property panel may not refresh after setting device properties.
- Workaround: Switch tabs and return to the coverage view.
- Issue ID# 6476: When using streamlined deployment with MXA-MUTE, the latest audio rout changes may not be reflected in the online room.
- Workaround: Use standard deployment when deploying a room that contains a MXA-MUTE device.
- Issue ID# 6477: It is possible to start import or clear of multiple P300 device presets at the same time, and this could result in a failure to import or clear.
- Workaround: If user encounters a failure, wait for 30 seconds, then retry the operation and it will be successful.
Notes
- User Guide
- To update firmware, please download Shure Update Utility
- Shure Web Device Discovery
- Event Logs paths
- Windows:
- C:\Users\<user name>\AppData\Local\Shure\Shure Designer 6\logs
- macOS
- ~/Library/Logs/Shure Designer 6/
- Windows:
- Designer 6 can be installed on the same PC as previous Designer versions. It is recommended to run them at separate times and not simultaneously.
- Previous Designer versions will not be removed when Designer 6 is installed.
Productos relacionados
IntelliMix® Room
Software de procesamiento de audio
IntelliMix® Room es un software de procesamiento digital de señales (DSP) que optimiza los micrófonos en red de Shure utilizados con software de videoconferencias.