Downloads

Firmware Archives

Title
Associated Products
File Size
January 18, 2019
SBC220/240 - 2-Bay Chargers
1.1.62

Improvement

  • Enforcement of Access Control via Wireless Workbench to devices with remote connection has been fixed.

Notes

  • User Guides: SBC220 | SBC240
  • To operate SBC220 or SBC240 version 1.1.62 with other Shure devices and software, see the following list of minimum versions:
    • Shure Update Utility 2.4.3
    • Wireless Workbench 6.12.6
January 18, 2019
SBC840 - 8-Bay Networked Charging Station
1.1.62

Improvements

  • Enforcement of Access Control via Wireless Workbench to devices with remote connection has been fixed

Notes

  • User Guide
  • To operate SBC840 version 1.1.62 with other Shure devices and software, see the following list of minimum versions:
    • Shure Update Utility 2.4.3
    • Wireless Workbench 6.12.6
January 18, 2019
SBC840M - 8-Bay Networked Charging Station
1.1.62

Improvements

  • Enforcement of Access Control via Wireless Workbench to devices with remote connection has been fixed.
  • Resolved an issue during initial battery detection and charge.

Notes

  • User Guide
  • To operate SBC840M version 1.1.62 with other Shure devices and software, see the following list of minimum versions:
    • Shure Update Utility 2.4.3
    • Wireless Workbench 6.12.6
January 11, 2019
MXA910 - Microflex Advance Ceiling Array Microphone
3.1.5

Recommendation

Update all MXA910 devices in a configuration to the same firmware version.

Improvements

Known Issues

  • When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
  • When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 3.1 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period. To correct this, hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari).

Notes

  • User Guide
  • New Demo Web UI
  • Command Strings
  • MXA910 version 3.1.5 is compatible with MXA310 devices running version 3.1.5 and below, but updating all devices used together to the same firmware version is recommended.
  • To operate MXA910 version 3.1.5 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
  • To operate MXA910 version 3.1.5 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI22 2.0.18
    • ANI4IN 2.0.18
    • ANI4OUT 2.0.18
    • ANIUSB-MATRIX 3.1.5
    • MXA310 3.1.5
    • Microflex Wireless 6.0.3
    • P300 IntelliMix® Audio Conferencing Processor 3.1.5
    • ULXD4D/4Q 2.2.24
    • SCM820 1.3.3
    • Shure Update Utility 2.4.3
    • Shure Web Device Discovery 1.2.5
January 11, 2019
MXA310 - Microflex Advance Table Array Microphone (Dante Only)
3.1.5

Recommendation

Update all MXA310 devices in a configuration to the same firmware version.

Improvements

Known Issues

  • After updating from version 2.X to 3.1.5, Channel EQ settings return to their default settings.
  • When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
  • When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 3.1 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period. To correct this, hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari).
  • The Mute Control Function command string response is incorrect when using
    • When using < GET MUTE_CONTROL_FUNC >, the response is as documented.
    • When using < GET 0 ALL >, the response should be mapped as follows:

< GET 0 ALL > Response

Actual MUTE_CONTROL_FUNC

< REP MUTE_BUTTON ON > ... < REP MUTE_CONTROL_FUNC LOGIC >

LOCAL

< REP MUTE_BUTTON ON > ... < REP MUTE_CONTROL_FUNC LOCAL >

LOGIC

< REP MUTE_BUTTON OFF >

DISABLED

Notes

  • User Guide
  • New Demo Web UI
  • Command Strings
  • MXA310 version 3.1.5 is compatible with MXA310 devices running version 3.1.5 and below, but updating all devices used together to the same firmware version is recommended.
  • To operate MXA310 version 3.1.5 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
  • To operate MXA310 version 3.1.5 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI22 2.0.18
    • ANI4IN 2.0.18
    • ANI4OUT 2.0.18
    • ANIUSB-MATRIX 3.1.5
    • MXA910 3.1.5
    • Microflex Wireless 5.2.2
    • P300 IntelliMix® Audio Conferencing Processor 2.1.6
    • ULXD4D/4Q 2.2.24
    • SCM820 1.3.3
    • Shure Update Utility 2.4.2
    • Shure Web Device Discovery 1.2.5
January 11, 2019
MXA310 - Microflex Advance Table Array Microphone
3.1.5

Recommendation

Update all MXA310 devices in a configuration to the same firmware version.

Improvements

Known Issues

  • After updating from version 2.X to 3.1.5, Channel EQ settings return to their default settings.
  • When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
  • When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 3.1 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period. To correct this, hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari).
  • The Mute Control Function command string response is incorrect when using
    • When using < GET MUTE_CONTROL_FUNC >, the response is as documented.
    • When using < GET 0 ALL >, the response should be mapped as follows:

< GET 0 ALL > Response

Actual MUTE_CONTROL_FUNC

< REP MUTE_BUTTON ON > ... < REP MUTE_CONTROL_FUNC LOGIC >

LOCAL

< REP MUTE_BUTTON ON > ... < REP MUTE_CONTROL_FUNC LOCAL >

LOGIC

< REP MUTE_BUTTON OFF >

DISABLED

Notes

  • User Guide
  • New Demo Web UI
  • Command Strings
  • MXA310 version 3.1.5 is compatible with MXA310 devices running version 3.1.5 and below, but updating all devices used together to the same firmware version is recommended.
  • To operate MXA310 version 3.1.5 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
  • To operate MXA310 version 3.1.5 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI22 2.0.18
    • ANI4IN 2.0.18
    • ANI4OUT 2.0.18
    • ANIUSB-MATRIX 3.1.5
    • MXA910 3.1.5
    • Microflex Wireless 5.2.2
    • P300 IntelliMix® Audio Conferencing Processor 2.1.6
    • ULXD4D/4Q 2.2.24
    • SCM820 1.3.3
    • Shure Update Utility 2.4.2
    • Shure Web Device Discovery 1.2.5
January 11, 2019
P300-IMX IntelliMix Audio Conferencing Processor
3.1.5

Improvements

  • Compatibility with Designer 3.1 System Configuration Software
  • Mute sync with Skype for Business (PC) and Zoom (PC and Mac)
  • Improved template values for Mic Input Gain, AGC Target, Automix settings, and Compressor Threshold for MXA310, MXA910, ANI4IN, MXW6, and MXW8
  • Improved initial USB speaker volume and sample rate settings
  • Improved Windows 7 media playback over USB
  • Hardware LED Metering and Clip Improvements
  • Bug fixes

Notes

  • User Guide
  • Command Strings
  • To operate P300-IMX version 3.1.5 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (macOS)
  • To operate P300-IMX version 3.1.5 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI22 2.0.18
    • ANIUSB-MATRIX 3.1.5
    • ANI4IN 2.0.18
    • ANI4OUT 2.0.18
    • MXA310 3.1.5
    • MXA910 3.1.5
    • Microflex Wireless 6.0.3
    • Shure Update Utility 3.4.2
    • Shure Web Device Discovery 1.2.5
January 11, 2019
ANIUSB-MATRIX - Audio Network Interface
3.1.5

Recommendation

Update all Audio Network Interfaces in a configuration to the same firmware version.

Improvements

Known Issues

  • TCPI set 0 for input level switch also incorrectly changes the output level switch and vice versa.
  • When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
  • When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 3.1 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period. To correct this, hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari).

Notes

  • User Guide
  • Command Strings
  • ANIUSB-MATRIX version 3.1.5 is compatible with ANIUSB-MATRIX devices running version 2.0.18 and below, but updating all devices used together to the same firmware version is recommended.
  • To operate ANIUSB-MATRIX version 3.1.5 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (macOS)
  • To operate ANIUSB-MATRIX version 2.0.19 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI22 2.0.18
    • ANI4IN 2.0.18
    • ANI4OUT 2.0.18
    • MXA310 3.1.5
    • MXA910 3.1.5
    • Microflex Wireless 6.0.3
    • P300 3.1.5
    • ULXD4D/4Q 2.2.23
    • SCM820 1.3.3
    • Shure Update Utility 2.4.3
    • Shure Web Device Discovery 1.2.5
January 7, 2019
MV88+ Video Kit - Digital Stereo Condenser Microphone
1.0.16

Initial Release

 

Known Issues

  • In a small number of instances, unplugging the MV88+ from an iPhone XS, XS Max, or XR can cause the phone to crash and reboot. This is due to an Apple bug that is being investigated and should be resolved in an upcoming iOS release.
  • In a small number of instances, the microphone will fail to be recognized by the MOTIV app, which will instead display "Built-In Mic" on the Mic Setup and Record screens and not record through the MV88+. Plugging the microphone into a PC or Mac, then plugging back into the mobile device will solve the issue.
  • When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

December 21, 2018
Microflex Complete
8.4.2

Release notes cover the following models:

  • MXC615
  • MXC620/620-F
  • MXC630/630-F
  • MXC640
  • MXCIC
  • MXCMIU
  • MXCSIGN

Important

  • This firmware release can be used to update Microflex Complete (MXC), DCS 6000, or DCS 5900 systems using DIS CCU, CU 6105 or CU 6110 Central Units.
  • Systems using CU 6000, CU 6005, CU 6010 and CU 6011 Central Units are not supported in this release.
  • Firmware Upgrade Utility (FUU) v1660, which is included in the release, is required to update MXC devices. In the FUU, MXC devices will be designated with an "-A" suffix.

New Features

DIS-CCU (6000 Mode), CU 61XX

  • Support for Microflex Complete MXC640, MXCIC, MXCMIU, and MXCSIGN.
  • Ability to setup up MXCSIGN dual side e-paper information display.

MXC

  • Support for configuring DCS LAN Redundant Loop (using MXC-ACC-RIB unit)
  • Speak Button Lock

Improvements

  • Support for setting GUI language in MXC640
  • Updated UI labels to match Microflex Complete Wireless
  • FUU_Firmware_Upgrade renamed to MXC_Firmware_Upgrade_Utility

Bug Fixes

  • DIS-CCU: Exclusive Functionality does not switch a shared microphone back on when removed.
  • No audio from a shared microphone after an un-mute.

Known Issues

  • When the system uses SW6000, voting result labels in TCP/IP control strings are shifted.
  • During boot up, there may be a spike on analog out.
  • MXC640
    • Reply/request list is responding slow with more than 50/50 in their respective lists.
    • Scrolling through an agenda with 100+ items is slow.
    • When an agenda with max. items and with max. words in item name and descriptions is received, the GUI may not be responsive for a period of time.
    • Manually entered voting results are not shown if voting has not yet started.
    • The agenda subject name for a manually entered result may be wrong if the participant has not closed the voting result screen after the last voting session.
    • “Rep on” and “Rep off”' buttons are missing in the UI with chairman left button configured to “Reply.”

Notes

  • MXC and DCS 6000 firmware files are packaged together in the same release file.
  • To operate MXC devices with release version 8.4.2 with other Shure networked systems, see the following list of minimum software and firmware versions:
    • DCS 6000 8.4.2
    • SW6000 6.7.8
    • Shure NFP Programming App 1.0.3