Firmware Archives
Downloads

Firmware Archives

Title
Associated Products
File Size
February 28, 2019
QLXD4 - Extended Bands Digital Wireless Receiver
2.3.8

Recommendation

Update all QLX-D devices in a configuration to the same firmware version

Important

QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

  • Support for Thailand 174 – 210 MHz frequency band (V52)

Notes

  • To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
  • To operate QLX-D version 2.3.8 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD6/8 Transmitters 2.3.21
    • ULX-D ULXD4/4D/4Q Receivers 2.3.21
    • Axient AXT600 Spectrum Manager 2.1.22
    • PSM1000 P10T Transmitters 1.6.21
    • Wireless Workbench 6.12.6
    • Shure Update Utility 2.4.3
    • ShurePlus Channels 1.4.2
January 18, 2019
AD1, AD2, ADX1, ADX1M, ADX2, and ADX2FD - Axient Digital Transmitters
1.1.62

New Features

  • Initial firmware for ADX2FD
  • Safe Start menu
    • The Safe Start menu powers on the unit with the RF muted to prevent interference to other nearby transmitters. Next, a Safe Start menu appears to quickly configure the RF and the available lock options.
    • To initiate the Safe Start menu for AD1, AD2, ADX1, ADX2, and ADX2FD, hold down EXIT during boot up. For ADX1M, hold down EXIT + UP during boot up.

Improvements

  • Updated the 794 – 806 MHz (R52) frequency band for Israel
  • Optimized performance of automatic interference avoidance for ADX2FD in the G56 and K56 bands when operating in Frequency Diversity combining mode.

Notes

  • User Guides: AD1 | AD2 | ADX1 | ADX1M | ADX2 | ADX2FD
  • AD1/2 and ADX1/1M/2 version 1.1.62 is compatible with devices on version 1.1.62 and below, but it is recommended to update all devices used together to the same firmware version.
  • To operate AD1/2 and ADX1/1M/2 version 1.1.62 devices with other Shure systems and software, see the following list of minimum versions:
    • Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.1.62
    • Axient Digital AD4D/Q Receivers 1.1.62
    • Axient AXT600 Spectrum Manager 2.1.22
    • SBC240/840/840M Chargers 1.1.62
    • SBRC Shure Battery Rack Charger 1.1.2
    • Shure Update Utility 2.4.3
    • ShurePlus Channels 1.4.2
    • Wireless Workbench 6.12.6
January 18, 2019
AD4D - Axient Digital Two-Channel Receiver
1.1.62

New Feature

  • Initial firmware for ADX2FD

Improvements

  • Network browser improvements to discover new Shure product variants.
  • Improved TCPI commands to include RSSI information below -120dBm.
  • Enforcement of Access Control via Wireless Workbench to devices with remote connection has been fixed

Notes

  • User Guide
  • Command Strings
  • AD4D version 1.1.62 is compatible with AD4D devices on version 1.1.62 and below, but it is recommended to update all devices used together to the same firmware version.
  • To operate AD4D version 1.1.62 devices with other Shure systems and software, see the following list of minimum versions:
    • Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.1.62
    • Axient Digital AD4D/Q Receivers 1.1.62
    • Axient AXT600 Spectrum Manager 2.1.22
    • SBRC Shure Battery Rack Charger 1.1.2
    • Shure Update Utility 2.4.3
    • ShurePlus Channels 1.4.2
    • Wireless Workbench 6.12.6
January 18, 2019
AD4Q - Axient Digital Four-Channel Receiver
1.1.62

New Feature

  • Initial firmware for ADX2FD

Improvements

  • Network browser improvements to discover new Shure product variants.
  • Improved TCPI commands to include RSSI information below -120dBm.
  • Enforcement of Access Control via Wireless Workbench to devices with remote connection has been fixed.

Notes

  • User Guide
  • Command Strings
  • AD4Q version 1.1.62 is compatible with AD4Q devices on version 1.1.62 and below, but it is recommended to update all devices used together to the same firmware version.
  • To operate AD4D version 1.1.62 devices with other Shure systems and software, see the following list of minimum versions:
    • Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.1.62
    • Axient Digital AD4D/Q Receivers 1.1.62
    • Axient AXT600 Spectrum Manager 2.1.22
    • SBRC Shure Battery Rack Charger 1.1.2
    • Shure Update Utility 2.4.3
    • ShurePlus Channels 1.4.2
    • Wireless Workbench 6.12.6
January 18, 2019
AD610 - Axient Digital Diversity ShowLink® Access Point
1.1.62

Improvement

  • Enforcement of Access Control via Wireless Workbench to devices with remote connection has been fixed.

Notes

  • User Guide
  • To operate AD610 version 1.1.62 devices with other Shure systems and software, see the following list of minimum versions:
    • Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.1.62
    • Axient Digital AD4D/Q Receivers 1.1.62
    • Axient AXT400 Receiver 2.1.11
    • Axient AXT100/200 2.1.11
    • SBRC Shure Battery Rack Charger 1.1.2
    • Shure Update Utility 2.4.3
    • ShurePlus Channels 1.4.2
    • Wireless Workbench 6.12.6
January 18, 2019
SBC220/240 - 2-Bay Chargers
1.1.62

Improvement

  • Enforcement of Access Control via Wireless Workbench to devices with remote connection has been fixed.

Notes

  • User Guides: SBC220 | SBC240
  • To operate SBC220 or SBC240 version 1.1.62 with other Shure devices and software, see the following list of minimum versions:
    • Shure Update Utility 2.4.3
    • Wireless Workbench 6.12.6
January 18, 2019
SBC840 - 8-Bay Networked Charging Station
1.1.62

Improvements

  • Enforcement of Access Control via Wireless Workbench to devices with remote connection has been fixed

Notes

  • User Guide
  • To operate SBC840 version 1.1.62 with other Shure devices and software, see the following list of minimum versions:
    • Shure Update Utility 2.4.3
    • Wireless Workbench 6.12.6
January 18, 2019
SBC840M - 8-Bay Networked Charging Station
1.1.62

Improvements

  • Enforcement of Access Control via Wireless Workbench to devices with remote connection has been fixed.
  • Resolved an issue during initial battery detection and charge.

Notes

  • User Guide
  • To operate SBC840M version 1.1.62 with other Shure devices and software, see the following list of minimum versions:
    • Shure Update Utility 2.4.3
    • Wireless Workbench 6.12.6
January 11, 2019
MXA910 - Microflex Advance Ceiling Array Microphone
3.1.5

Recommendation

Update all MXA910 devices in a configuration to the same firmware version.

Improvements

Known Issues

  • When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
  • When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 3.1 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period. To correct this, hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari).

Notes

  • User Guide
  • New Demo Web UI
  • Command Strings
  • MXA910 version 3.1.5 is compatible with MXA310 devices running version 3.1.5 and below, but updating all devices used together to the same firmware version is recommended.
  • To operate MXA910 version 3.1.5 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
  • To operate MXA910 version 3.1.5 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI22 2.0.18
    • ANI4IN 2.0.18
    • ANI4OUT 2.0.18
    • ANIUSB-MATRIX 3.1.5
    • MXA310 3.1.5
    • Microflex Wireless 6.0.3
    • P300 IntelliMix® Audio Conferencing Processor 3.1.5
    • ULXD4D/4Q 2.2.24
    • SCM820 1.3.3
    • Shure Update Utility 2.4.3
    • Shure Web Device Discovery 1.2.5
January 11, 2019
MXA310 - Microflex Advance Table Array Microphone (Dante Only)
3.1.5

Recommendation

Update all MXA310 devices in a configuration to the same firmware version.

Improvements

Known Issues

  • After updating from version 2.X to 3.1.5, Channel EQ settings return to their default settings.
  • When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
  • When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 3.1 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period. To correct this, hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari).
  • The Mute Control Function command string response is incorrect when using
    • When using < GET MUTE_CONTROL_FUNC >, the response is as documented.
    • When using < GET 0 ALL >, the response should be mapped as follows:

< GET 0 ALL > Response

Actual MUTE_CONTROL_FUNC

< REP MUTE_BUTTON ON > ... < REP MUTE_CONTROL_FUNC LOGIC >

LOCAL

< REP MUTE_BUTTON ON > ... < REP MUTE_CONTROL_FUNC LOCAL >

LOGIC

< REP MUTE_BUTTON OFF >

DISABLED

Notes

  • User Guide
  • New Demo Web UI
  • Command Strings
  • MXA310 version 3.1.5 is compatible with MXA310 devices running version 3.1.5 and below, but updating all devices used together to the same firmware version is recommended.
  • To operate MXA310 version 3.1.5 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
  • To operate MXA310 version 3.1.5 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI22 2.0.18
    • ANI4IN 2.0.18
    • ANI4OUT 2.0.18
    • ANIUSB-MATRIX 3.1.5
    • MXA910 3.1.5
    • Microflex Wireless 5.2.2
    • P300 IntelliMix® Audio Conferencing Processor 2.1.6
    • ULXD4D/4Q 2.2.24
    • SCM820 1.3.3
    • Shure Update Utility 2.4.2
    • Shure Web Device Discovery 1.2.5