Find An Answer

Find An Answer

Browse our vast Answer database for answers to many common technical questions.
Results per page: 10 25 50 100
What type of Input connection does the SCM800 have on front panel?
February 23, 2018

The Aux input on the front panel (and rear panel) is unbalanced. It is wired:Tip and Ring: resistively isolated, then summed togetherSleeve: groundIt ...

Unbalanced output into balanced input
October 13, 2017

1) Set the SCM800 input to LINE.2) Obtain a cable with a twisted pair of inner conductors (A and B) and a shield.3) Fabricate and connect the cable as ...

SCM810 and SCM800 AUX Input Connectors
September 13, 2017

The "AUX" inputs on both the front and rear panels of the SCM810 are designed for line level class signals.  A common application ...

Input connectors for SCM800
August 31, 2017

Nine input connectors are supplied when you purchase the SCM800. If you require more, please contact Shure Parts at 800-516-2525. The Shure part numbe ...

M367, M267, or M67 Replacement or Alternative
August 31, 2017

Consider these alternatives:Shure SCM268 mixer - four mic/aux inputs and one aux only inputShure SCM800 mixer - eight mic/line inputs a ...

SCM810 and SCM800 Input Gain - Design Changes
December 9, 2015

Yes, there is a gain difference when an input is set to provide phantom power. This setting is labeled "PHM" and is controlled by the slide ...

SCM810, SCM800, SCM410, FP410 link jack pin-outs and cable info
October 24, 2012

Pin Functions of SCM810 Link Jacks.Pin 1 - Signal ground; shield of link cablePin 2 - Link In jack: signal groundPin 2 - Link Out jack : When grounded ...

Are the MX202 series microphones compatible with the SCM800 mixers?
June 4, 2009

The MX202 microphones will work perfectly fine with the SCM800/SCM810 mixers. ...

Linked SCM810/800 Mixers - Reducing Hum and Buzz
October 15, 2008

The Shure SCM800 and SCM810 mixers may be linked to increase the number of inputs. This is accomplished via the Link jacks on the rear panel of each m ...