Find An Answer

Browse our vast Answer database for answers to many common technical questions.
Results per page: 10 25 50 100
Using the SM98 wireless
February 22, 2018

Shure has a cable that is three pin on the mic end, and four pin on the transmitter end. The part number is: 90A4039. Call Shure Parts at 800-516-2525 ...

Will phantom power damage the LX4 receiver?
February 22, 2018

Yes. The LX4 will not be damaged. ...

SM57 vs. Beta 57A
February 22, 2018

Polar pattern: Beta 57A = supercardioid; SM57 = cardioidOutput level: Beta 57A is 4dB hotter than SM57Handling noise: Beta 57A is quieter than SM57Gri ...

WL50 or WL51 for singing
February 22, 2018

1) Take a look at the Beta 53 or Beta 54.2) It is available in tan.3) The Beta 53 and 54 are designed to work with Shure wireless systems. ...

SM94 for Bluegrass?
February 22, 2018

Is the SM94 going to work for Mandolin, Banjo, Dobro, Fiddle as well as acoustic guitar?* The SM94 will handle the frequency range of every instrument ...

Should both RF status lights be lit on a T4N diversity VHF receiver?
February 22, 2018

Right out of the box, we powered on the system, reciever and transmitter. However, only one of the two RF lights lit up, along with the power lights. ...

SM57 and SM81 with a UT Transmitter
February 22, 2018

Is it possible to use my wired SM57 with my UT bodypack transmitter?* Yes. Use the WA310 adapter cable.Is it possible to use wired SM81 with my UT bod ...

Foam for PE55 Microphone
February 22, 2018

The foam used inside of the Shure model 55SH Series II will likely be a close fit to the PE55. Call Shure Parts to inquiry about the foam for the 55SH ...

Five inputs into the P4M?
February 22, 2018

Yes. There are 4 inputs on the front of the P4M for the microphones. There is an additional 5th stereo input on the back that may be used for the keyb ...

M44E Specifications
February 22, 2018

M44EResponse: 20 to 20,000 HzOutput voltage: 9.5 mV per channelSeparation: >20dB at 1,000 HzTracking force: 1.75 to 4 gramsStylus: biradial (.0004 ...