Battery Powered Phantom Power Supply with Balanced Output

Date Updated: April 18, 2019 FAQ #228
Question:
How do I make a battery powered phantom power supply that was balanced XLR in and out?
Answer:


The schematic below illustrates an 18 volt phantom supply. It will supply any Shure microphone that requires phantom power. Battery life is dependent on the current drain of the microphone. To estimate the battery life in hours, divide 400 by the microphone's current drain in milliamps. For example, the Shure SM81, with a current drain of 1.2 milliamps, will operate for about 330 hours. The use of premium alkaline batteries is recommended.
 









Schematic for 18 Volt Phantom Supply
Output must feed a balanced input


Image









D1 = 1N4001 or equivalent
R1, R2 = 2.2kohms, 1/4W, 1%
S1 = SPST
This circuit must be in a metal enclosure.
Pin 1 must be grounded to the enclosure
Parts availabe from Mouser Electronics
(800) 346-6873 or www.mouser.com


 


Attachments: