Downloads
Software & Firmware Archives
Firmware
1.7.34
December 10, 2015
View All Updates
Important
- ULXD4D and ULXD4Q receivers running firmware prior to 1.4.8 must be updated to 1.4.8 before updating to newer versions.
- ULXD4D and ULXD4Q receivers running firmware between 1.4.8 and 2.0.28 must be updated to 2.0.28 before updating to newer versions.
- After 2.0.28 is installed, ULXD4D and ULXD4Q receivers can be updated to the latest available firmware version.
- ULX-D devices that are downgrading to 1.5.6 may report a false failure.
- Workaround: Because this is a false failure, closing the send updates window and going to the main page, Shure Update Utility will show green for the firmware version.
Improvement
- Added new frequency band Z16 (1240 – 1260 MHz) for Japan
Notes
- Fixed bug relating to encryption mismatch conditions.
- Fixed IR LED behavior when firmware updating transmitters.
- Transmitters to be used with receivers must be updated via IR. After the receiver is updated, follow these steps:
- Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
- Align the infrared ports with the transmitter
- Press ENTER.
- For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.7.34:
- QLX-D Receiver 1.0.15
Firmware
1.7.34
December 10, 2015
View All Updates
Improvement
- Added new frequency band Z16 (1240 – 1260 MHz) for Japan
Notes
- Fixed bug relating to encryption mismatch conditions.
- Fixed IR LED behavior when firmware updating transmitters.
- Transmitters to be used with receivers must be updated via IR. After the receiver is updated, follow these steps:
- Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
- Align the infrared ports with the transmitter
- Press ENTER.
- For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.7.34:
- QLX-D Receiver 1.0.15
Firmware
1.7.34
December 10, 2015
View All Updates
Improvement
- Added new frequency band Z16 (1240 – 1260 MHz) for Japan
Notes
- Fixed bug relating to encryption mismatch conditions.
- Fixed IR LED behavior when firmware updating transmitters.
- Transmitters to be used with receivers must be updated via IR. After the receiver is updated, follow these steps:
- Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
- Align the infrared ports with the transmitter
- Press ENTER.
- For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.7.34:
- QLX-D receiver 1.0.15
Firmware
1.6.11
October 20, 2015
View All Updates
Important
- ULXD4D and ULXD4Q receivers running firmware prior to 1.4.8 must be updated to 1.4.8 before updating to newer versions.
- ULXD4D and ULXD4Q receivers running firmware between 1.4.8 and 2.0.28 must be updated to 2.0.28 before updating to newer versions.
- After 2.0.28 is installed, ULXD4D and ULXD4Q receivers can be updated to the latest available firmware version.
- ULX-D devices that are downgrading to 1.5.6 may report a false failure.
- Workaround: Because this is a false failure, closing the send updates window and going to the main page, Shure Update Utility will show green for the firmware version.
New Feature
- ULXD4, ULXD4D, and ULXD4Q receivers can now power two UA864 antennas in parallel per receiver input for a total of four antennas. To view an example of a similar setup, with different antennas, see the FAQ: Antenna Distribution – 2 Rooms, 4 Antennas, which also includes information on how to modify the UA221 passive antenna accessory.
Notes
- Transmitters to be used with receivers must be updated via IR. After the receiver is updated, follow these steps:
- Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
- Align the infrared ports with the transmitter
- Press ENTER.
- For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.6.11:
- QLX-D receiver 1.0.15
Firmware
1.6.11
October 20, 2015
View All Updates
New Feature
- ULXD4, ULXD4D, and ULXD4Q receivers can now power two UA864 antennas in parallel per receiver input for a total of four antennas. To view an example of a similar setup, with different antennas, see the FAQ: Antenna Distribution – 2 Rooms, 4 Antennas, which also includes information on how to modify the UA221 passive antenna accessory.
Notes
- Transmitters to be used with receivers must be updated via IR. After the receiver is updated, follow these steps:
- Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
- Align the infrared ports with the transmitter
- Press ENTER.
- For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.6.11:
- QLX-D receiver 1.0.15
Firmware
1.6.10
July 9, 2015
View All Updates
Important
- ULXD4D and ULXD4Q receivers running firmware prior to 1.4.8 must be updated to 1.4.8 before updating to newer versions.
- ULXD4D and ULXD4Q receivers running firmware between 1.4.8 and 2.0.28 must be updated to 2.0.28 before updating to newer versions.
- After 2.0.28 is installed, ULXD4D and ULXD4Q receivers can be updated to the latest available firmware version.
- ULX-D devices that are downgrading to 1.5.6 may report a false failure.
- Workaround: Because this is a false failure, closing the send updates window and going to the main page, Shure Update Utility will show green for the firmware version.
New Features
- 900MHz ISM Site Survey via Wireless Workbench (WWB) for X52, X53, and X54 frequency bands.
- WWB Site Survey (902 - 928 MHz) Utility, which utilizes ISM-band devices to capture long-term scans and generates processed scan data, tailored specifically for coordination in this spectrum. Access this utility by selecting TOOLS > SITE SURVEY (902 - 928 MHz).
- This utility is designed to use an ISM-band Shure receiver to assess whether a particular venue is well suited for ISM-band operation of fixed frequency microphone systems.
- This utility includes the “Usability Report”, which runs sample calculations and reports an approximate number of usable channels in the ISM band.
- For more information, consult the Wireless Workbench 6 Help System in version 6.11.2 or later.
Improvements
- Added new frequency bands:
- Americas (except Brazil): X52: 902-928 MHz
- Brazil: X53: 902-907.5, 915-928 MHz
- Australia: X54: 915-928 MHz
Notes
- Transmitters to be used with receivers must be updated via IR. After the receiver is updated, follow these steps:
- Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
- Align the infrared ports with the transmitter
- Press ENTER.
- For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.6.10:
- QLX-D receiver 1.0.15
Firmware
1.6.10
July 9, 2015
View All Updates
New Features
- 900MHz ISM Site Survey via Wireless Workbench (WWB) for X52, X53, and X54 frequency bands.
- WWB Site Survey (902 - 928 MHz) Utility, which utilizes ISM-band devices to capture long-term scans and generates processed scan data, tailored specifically for coordination in this spectrum. Access this utility by selecting TOOLS > SITE SURVEY (902 - 928 MHz).
- This utility is designed to use an ISM-band Shure receiver to assess whether a particular venue is well suited for ISM-band operation of fixed frequency microphone systems.
- This utility includes the “Usability Report”, which runs sample calculations and reports an approximate number of usable channels in the ISM band.
- For more information, consult the Wireless Workbench 6 Help System in version 6.11.2 or later.
Improvements
- Added new frequency bands:
- Americas (except Brazil): X52: 902-928 MHz
- Brazil: X53: 902-907.5, 915-928 MHz
- Australia: X54: 915-928 MHz
Notes
- Transmitters to be used with receivers must be updated via IR. After the receiver is updated, follow these steps:
- Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
- Align the infrared ports with the transmitter
- Press ENTER.
- For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.6.10:
- QLX-D receiver 1.0.15
Firmware
1.6.7
May 29, 2015
View All Updates
Important
- ULXD4D and ULXD4Q receivers running firmware prior to 1.4.8 must be updated to 1.4.8 before updating to newer versions.
- ULXD4D and ULXD4Q receivers running firmware between 1.4.8 and 2.0.28 must be updated to 2.0.28 before updating to newer versions.
- After 2.0.28 is installed, ULXD4D and ULXD4Q receivers can be updated to the latest available firmware version.
- ULX-D devices that are downgrading to 1.5.6 may report a false failure.
- Workaround: Because this is a false failure, closing the send updates window and going to the main page, Shure Update Utility will show green for the firmware version.
Improvements
- Minor bug fixes to support firmware updates with the Shure Update Utility.
Notes
- For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.6.7:
- ULX-D ULXD1/2 Transmitters and ULXD4, ULXD4D, ULXD4Q Receivers 1.5.6
- Axient AXT400 Receivers and AXT600 Spectrum Managers 1.15.3
- Wireless Workbench 6 version 6.10.3
Firmware
1.6.6
February 4, 2015
View All Updates
Important
- ULXD4D and ULXD4Q receivers running firmware prior to 1.4.8 must be updated to 1.4.8 before updating to newer versions.
- ULXD4D and ULXD4Q receivers running firmware between 1.4.8 and 2.0.28 must be updated to 2.0.28 before updating to newer versions.
- After 2.0.28 is installed, ULXD4D and ULXD4Q receivers can be updated to the latest available firmware version.
- ULX-D devices that are downgrading to 1.5.6 may report a false failure.
- Workaround: Because this is a false failure, closing the send updates window and going to the main page, Shure Update Utility will show green for the firmware version.
Improvements
- Added ability to disable Interference Alerts
- Default value is Interference Alert: "ON"
- Can be disabled by navigating to Device Utilities > Advanced RF > Interference and selecting "OFF"
Notes
- For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.6.6:
- ULX-D ULXD1/2 Transmitters and ULXD4, ULXD4D, ULXD4Q Receivers 1.5.6
- Axient AXT400 Receivers and AXT600 Spectrum Managers 1.15.3
- Wireless Workbench 6 version 6.10.3
Firmware
1.5.18
November 14, 2014
View All Updates
Important
- ULXD4D and ULXD4Q receivers running firmware prior to 1.4.8 must be updated to 1.4.8 before updating to newer versions.
- ULXD4D and ULXD4Q receivers running firmware between 1.4.8 and 2.0.28 must be updated to 2.0.28 before updating to newer versions.
- After 2.0.28 is installed, ULXD4D and ULXD4Q receivers can be updated to the latest available firmware version.
- ULX-D devices that are downgrading to 1.5.6 may report a false failure.
- Workaround: Because this is a false failure, closing the send updates window and going to the main page, Shure Update Utility will show green for the firmware version.
Improvements
- Added support to repair a rare networking issue with Duplicate Dante MAC Addresses for Dante-enabled ULX-D receivers.
Notes
- For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.5.18:
- ULX-D ULXD1/2 Transmitters and ULXD4, ULXD4D, ULXD4Q Receivers 1.5.6
- Axient AXT400 Receivers and AXT600 Spectrum Managers 1.15.3
- Wireless Workbench 6 version 6.10.3