Microflex Complete Release Notes

Discussion and conferencing system

Release 8.5.0 

Release Date: 8/16/2019 

Release notes cover the following models: 

  • MXC615 

  • MXC620/620-F 

  • MXC630/630-F 

  • MXC640 

  • MXCIC 

  • MXCMIU 

  • MXCSIGN 

Important 

  • This firmware release can be used to update Microflex Complete (MXC), DCS 6000, or DCS 5900 systems using DIS CCU, CU 5905, CU 6105, or CU 6110 Central Units. 

  • Systems using CU 6000, CU 6005, CU 6010 and CU 6011 Central Units are not supported in this release. 

  • Firmware Upgrade Utility (FUU) v1684, which is included in the release, is required to update MXC devices. In the FUU, MXC devices will be designated with an "-A" suffix. 

New Features 

DIS-CCU (6000 Mode) 

  • Support for Dual delegate role 

  • Real-time diagnostics for MXC units: 

    • Loop problem (due to cable or unit failure) 
    • Unit offline/online status 
    • Low voltage level 
    • Alerts appear in the event log 
  • DCS-LAN network topology information for MXC units 

  • Activation of LED indication for units in chain and in loop 

  • Save and restore CCU settings 

  • TPCI commands showing when interpreter audio is present on interpreter channels 

MXCMIU 

  • Support for Dual Delegate role when used with two MXCMIU-FL/FS front plates connected to the HDMI A and B connectors (supports dual microphones, dual loudspeakers, dual LEDs) 

MXC615 

  • Support for Dual Delegate role 

MXC620 

  • Support for Dual Delegate role (except NFC ID card functionality) 

MXC640 

  • Support for Dual Delegate role (except NFC ID card functionality) 

  • Participant speech timer appears on MXC640 screen when used with SW6000 software 

  • Ability in SW6000 software to allow all participants with a specific role (e.g. Delegate) to view or hide the speak/request list on their MXC640 screen 

  • Chairman can start/stop meetings on MXC640 (meetings must be set up in SW6000 software) 

  • Support for 2-button (Yes/No) voting in standalone mode without SW6000 software 

  • Ability to upload startup screen image/logo via Firmware Update Utility 

  • Support for up to 1000 agenda items 

  • 3 additional screen languages (Thai, Turkish, Lithuanian added; brings total to 17) 

MXCIC 

  • Interpreter can view the Speak/Request list on MXCIC screen (when used standalone or with SW6000) 

  • "Slow" button now active 

  • Language Pre-select control behavior changed: Language selection is now activated on release of a pre-select button, in addition to clicking the rotary button to confirm. Also, pressing or turning the rotary button while holding a pre-select button launches the pre-select language list. 

Improvements 

  • MXC640 

    • Improvements to result note display
    • All language-based properties at meeting end
    • Info in the top menu is updated

Bug Fixes

  • DIS-CCU 

    • Corrected a bug where seat numbers were not sorted in the Participant Setup page
  • MXC640 

    • Corrected bugs where
      • it was not possible to set a subject active 

      • the Speak button LED does not blink when unit is next in the request list in FIFO mode 

      • the unit language is not changed back to system language after the user is logged out or after stopping the meeting 

Known Issues 

  • When the system uses SW6000, voting result labels in TCP/IP control strings are shifted. 

  • During boot up, there may be a spike on the analog output. 

  • Some units in systems >150 units may not be shown in the Topology report. 

  • Some units may reset when cable breaks in a loop on an EX 6010 unit. 

  • The Event log in DIS-CCU CGUI does not work when SW6000 is connected and a meeting is started. 

  • MXC640 

    • When an agenda with max. items and with max. words in the item name and descriptions is received, the GUI may not be responsive for a period of time 

    • Manually entered voting results are not shown if a normal voting session has not been started first 

    • The agenda subject name for a manually entered result may be wrong

    • It is not possible to use an MXC640 configured as dual delegate with SW6000 if the use of NFC cards is enabled 

    • Re-doing an attendance check might make the attendance button nonoperational  

    • The percent indication in the Voting Result screen may not be correct for user-specified voting configurations 

  • MXCMIU 

    • The Exclusive button does not work if configured to the function button (left button) 

Notes 

  • MXC and DCS 6000 firmware files are packaged together in the same release file. 

  • To operate MXC devices with release version 8.5.0 with other Shure networked systems, see the following list of minimum software and firmware versions:

    • DCS 6000 8.5.0

    • SW6000 6.8.33a

    • Shure NFC Programming App 1.0.3 

Release 8.4.2

Release Date: 12/21/2018

Release notes cover the following models:

  • MXC615
  • MXC620/620-F
  • MXC630/630-F
  • MXC640
  • MXCIC
  • MXCMIU
  • MXCSIGN

Important

  • This firmware release can be used to update Microflex Complete (MXC), DCS 6000, or DCS 6900 systems using DIS CCU, CU 6105 or CU 6110 Central Units.
  • Systems using CU 6000, CU 6005, CU 6010 and CU 6011 Central Units are not supported in this release.
  • Firmware Upgrade Utility (FUU) v1660, which is included in the release, is required to update MXC devices. In the FUU, MXC devices will be designated with an "-A" suffix.

New Features

DIS-CCU (6000 Mode), CU 61XX

  • Support for Microflex Complete MXC640, MXCIC, MXCMIU, and MXCSIGN.
  • Ability to setup up MXCSIGN dual side e-paper information display.

MXC

  • Support for configuring DCS LAN Redundant Loop (using MXC-ACC-RIB unit)
  • Speak Button Lock

Improvements

  • Support for setting GUI language in MXC640
  • Updated UI labels to match Microflex Complete Wireless
  • FUU_Firmware_Upgrade renamed to MXC_Firmware_Upgrade_Utility

Bug Fixes

  • DIS-CCU: Exclusive Functionality does not switch a shared microphone back on when removed.
  • No audio from a shared microphone after an un-mute.

Known Issues

  • When the system uses SW6000, voting result labels in TCP/IP control strings are shifted.
  • During boot up, there may be a spike on analog out.
  • MXC640
    • Reply/request list is responding slow with more than 50/50 in their respective lists.
    • Scrolling through an agenda with 100+ items is slow.
    • When an agenda with max. items and with max. words in item name and descriptions is received, the GUI may not be responsive for a period of time.
    • Manually entered voting results are not shown if voting has not yet started.
    • The agenda subject name for a manually entered result may be wrong if the participant has not closed the voting result screen after the last voting session.
    • “Rep on” and “Rep off”' buttons are missing in the UI with chairman left button configured to “Reply.”

Notes

  • MXC and DCS 6000 firmware files are packaged together in the same release file.
  • To operate MXC devices with release version 8.4.2 with other Shure networked systems, see the following list of minimum software and firmware versions:
    • DCS 6000 8.4.2
    • SW6000 6.7.8
    • Shure NFP Programming App 1.0.3

 

Release 8.3.1

Release Date: 7/24/2018

Release notes cover the following models:

  • MXC615
  • MXC620/620-F
  • MXC630/630-F

Important

  • This firmware release can be used to upgrade Microflex Complete (MXC) devices in a system using DIS CCU, CU 6105 or CU 6110 Central Units.
  • Firmware Upgrade Utility (FUU) v1641, which is included in the release,is required to upgrade MXC devices. In the FUU, MXC devices will be designated with an "-A" suffix.

New Feature

Notes

  • Microflex Complete and DCS 6000 firmware files are packaged together in the same release file.
  • To operate MXC devices release 8.3.1 with other Shure networked systems, see the following list of minimum software and firmware versions:
    • DCS 6000 8.3.1
    • SW6000 6.7.1