ANIUSB-MATRIX Firmware Release Notes

Audio Network Interface

Recommendation

Update all Audio Network Interfaces in a configuration to the newest firmware versions.

Version 3.1.6

Release date: 6/27/2019

Improvement

  • Fix for web server performance issues

Known Issues

  • There is the potential for a loss of audio after a power cycle when using Static IP setting: Un-checking and re-checking the Dante connections is necessary to reestablish audio between devices. An Alternative fix is to use DHCP addressing.
  • TCPI set 0 for input level switch also incorrectly changes the output level switch and vice versa.
  • When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported.
  • When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 3.1 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period. To correct this, hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari).

Notes

  • User Guide
  • Command Strings
  • ANIUSB-MATRIX version 3.1.6 is compatible with ANIUSB-MATRIX devices running version 3.1.6 and below, but updating all devices used together to the same firmware version is recommended.
  • To operate ANIUSB-MATRIX version 3.1.6 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (macOS)
  • To operate ANIUSB-MATRIX version 3.1.6 with Shure software or other Shure networked systems, reference the following list of minimum versions supported:
    • Shure Designer 3.2
    • Shure SystemOn 3.2
    • ANI22 2.0.18
    • ANI4IN 2.0.18
    • ANI4OUT 2.0.18
    • MXA310 3.1.6
    • MXA910 4.0.12
    • Microflex Wireless 6.0.3
    • P300 3.1.6
    • ULXD4D/4Q 2.3.34
    • SCM820 1.3.3
    • Shure Update Utility 2.4.4
    • Shure Web Device Discovery 1.2.5

Version 3.1.5

Release Date: 1/11/2019

Improvements

Known Issues

  • There is the potential for a loss of audio after a power cycle when using Static IP setting: Un-checking and re-checking the Dante connections is necessary to reestablish audio between devices. An Alternative fix is to use DHCP addressing.
  • TCPI set 0 for input level switch also incorrectly changes the output level switch and vice versa.
  • When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
  • When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 3.1 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period. To correct this, hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari).

Notes

  • User Guide
  • Command Strings
  • ANIUSB-MATRIX version 3.1.5 is compatible with ANIUSB-MATRIX devices running version 3.1.5 and below, but updating all devices used together to the same firmware version is recommended.
  • To operate ANIUSB-MATRIX version 3.1.5 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (macOS)
  • To operate ANIUSB-MATRIX version 3.1.6 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI22 2.0.18
    • ANI4IN 2.0.18
    • ANI4OUT 2.0.18
    • MXA310 3.1.5
    • MXA910 3.1.5
    • Microflex Wireless 6.0.3
    • P300 3.1.5
    • ULXD4D/4Q 2.3.23
    • SCM820 1.3.3
    • Shure Update Utility 2.4.3
    • Shure Web Device Discovery 1.2.5

Version 2.0.19

Release Date: 12/18/2017

Improvement

  • Reduces the loading time over VPN for the web-based graphical user interface (GUI)

Known Issue

  • TCPI set 0 for input level switch also incorrectly changes the output level switch and vice versa.
  • When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported.

Notes

  • User Guide
  • ANIUSB-MATRIX version 2.0.19 is compatible with ANIUSB-MATRIX devices running version 2.0.18 and below, but updating all devices used together to the same firmware version is recommended.
  • To operate ANIUSB-MATRIX version 2.0.19 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
  • To operate ANIUSB-MATRIX version 2.0.19 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI22 2.0.18
    • ANI4IN 2.0.18
    • ANI4OUT 2.0.18
    • MXA310 2.0.19
    • MXA910 2.0.19
    • Microflex Wireless 5.1.26
    • ULXD4D/4Q 2.1.16
    • SCM820 1.3.3
    • Shure Update Utility 2.4.1
    • Shure Web Device Discovery 1.1

Version 2.0.11

Release Date: 8/31/2017

New Feature

Notes

  • To operate ANIUSB-MATRIX version 2.0.11 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
  • To operate ANIUSB-MATRIX version 2.0.11 with other Shure networked systems, reference the following list of minimum versions supported:
    • ANI4IN 2.0.7
    • ANI4OUT 2.0.8
    • MXA310 2.0.7
    • MXA910 2.0.8
    • Microflex Wireless 5.1.23
    • SCM820 1.3.3
    • Shure Update Utility 2.4
    • Shure Web Device Discovery 1.1