Software & Firmware Archives

Improvements

• Added setting for AA Battery Type for P10R+ receivers. To ensure accurate runtime when using alkaline, lithium or NiMH AA batteries, set the battery type in the receiver menu to match the installed AA battery type.
• Support for new bands

Notes

• User Guide
• To operate PSM1000 devices version 1.7.10 with other Shure networked systems, see the following list of supported minimum versions:
  • AXT600 2.1.31
  • Axient Digital 1.2.83
  • ULX-D 2.4.9 – 2.4.13
  • Wireless Workbench 6.13.3
  • Shure Update Utility 2.4.8
  • ShurePlus Channels 1.4.2

New Features

• Support for new bands
• Bug fixes

Notes

• User Guide
• To operate PSM1000 devices version 1.7.10 with other Shure networked systems, see the following list of supported minimum versions:
  • AXT600 2.1.31
  • Axient Digital 1.2.83
  • ULX-D 2.4.9 – 2.4.13
  • Wireless Workbench 6.13.3
  • Shure Update Utility 2.4.8
  • ShurePlus Channels 1.4.2

Improvement

• USB compatibility upgrade

Known Issues

• Shure Audio Encryption is not backwards compatible; all devices must be on version 4.2.X firmware to use this feature
• Occasionally mute sync breaks between ANIUSB/P300 to MS Teams during a call when a mute button is quickly tapped multiple times. To resolve this, unplug and replug the USB cable or quit and restart Teams
• USB Output audio may be distorted by the host PC when using some USB extenders
• Shure Update Utility and Designer may not allow downgrading of new P300s shipped with 4.2.7 or higher due to a platform update to support future functionality and USB improvements

Notes

• User Guide
• Command Strings
• To operate P300-IMX version 3.1.84.2.7with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (macOS)
• To operate P300-IMX version 3.1.84.2.7 with other Shure networked systems, reference the following list of minimum versions supported:
  • Shure Designer 4.2
  • ANI22 4.2.18
  • ANIUSB-MATRIX 4.2.23
  • ANI4IN 4.2.18
  • ANI4OUT 4.2.18
  • MXA310 4.2.18
  • MXA710 1.0.5
  • MXA_MUTE 1.0.8
  • MXN5-C 1.0.6
  • MXA910 4.2.18
  • Microflex Wireless 8.0.3
  • Shure Update Utility 2.4.8
  • Shure Web Device Discovery 1.2.9

Improvement

• USB compatibility upgrade

Known Issues

• Pop noise is triggered when the channel is unrouted in Dante controller
• Factory reset occasionally fails to reset Dante settings and/or fully disable encryption. Solution: Reboot the device if unable to route audio after factory reset.
• TCPI set 0 for input level switch also incorrectly changes the output level switch and vice versa
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported.
• When attempting to load the device’s web page after using SUU to upgrade or downgrade between MXA 4.2 and earlier releases, the browser may appear to be stuck on the “Loading” screen with the progress bar continually moving. This will typically happen if two upgrades or downgrades are performed within a one-hour period. To correct this, hold your Shift key and click the Refresh button in your browser (or press Ctrl+Shift+R [Win]/Ctrl+F5 [Win]/Cmd+Shift+R [Mac]; note the keyboard shortcut doesn't work on Safari)
• USB Output audio may be distorted by the host PC when using some USB extenders
• Shure Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware or newer to use this feature
• Shure Update Utility and Designer may not allow downgrading of some ANIUSBs due to USB improvements

Notes

• User Guide
• Command Strings
• ANIUSB-MATRIX version 4.2.23 is compatible with ANIUSB-MATRIX devices running version 4.2.23 and below, but updating all devices used together to the same firmware version is recommended.
• To operate ANIUSB-MATRIX version 4.2.23 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (macOS)
• To operate ANIUSB-MATRIX version 4.2.23 with Shure software or other Shure networked systems, reference the following list of minimum versions supported:
  • Shure Designer 4.2
  • ANI22 4.2.18
  • ANI4IN 4.2.18
  • ANI4OUT 4.2.18
  • MXA310 4.2.18
  • MXA910 4.2.18
  • Microflex Wireless 8.0.3
  • P300 4.2.7
  • ULXD4D/4Q 2.4.9
  • SCM820 1.3.3
  • Shure Update Utility 2.4.8
  • Shure Web Device Discovery 1.2.9

Improvements

• Updated the firmware version number for the purpose of keeping all Axient Digital firmware version numbers aligned for brand-new system installations

Notes

• User Guides: AD1 | AD2 | ADX1 | ADX1M | ADX2 | ADX2FD
• To operate version 1.2.109 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.2.109
  • Axient Digital AD4D/Q Receivers 1.2.83
  • Axient AXT600 Spectrum Manager 2.1.31
  • SBC240/840/840M Chargers 1.2.109
  • SBRC Shure Battery Rack Charger 1.1.5
  • Shure Update Utility 2.4.8
  • ShurePlus Channels 1.4.5
  • Wireless Workbench 6.13.3

New Feature

• Scan API now provides data per antenna

Improvements

• Support for frequency band China: 630 MHz – 698 MHz (L60)

Notes

• User Guide
• Command Strings
• To operate AD4D version 1.2.109 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.2.109
  • Axient Digital AD4D/Q Receivers 1.2.109
  • Axient AXT600 Spectrum Manager 2.1.31
  • SBRC Shure Battery Rack Charger 1.1.5
  • Shure Update Utility 2.4.8
  • ShurePlus Channels 1.4.5
  • Wireless Workbench 6.13.3

New Feature

• Scan API now provides data per antenna

Improvements

• Support for frequency band China: 630 MHz – 698 MHz (L60)

Notes

• User Guide
• Command Strings
• To operate AD4Q 1.2.109 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.2.73
  • Axient Digital AD4D/Q Receivers 1.2.73
  • Axient AXT600 Spectrum Manager 2.1.31
  • SBRC Shure Battery Rack Charger 1.1.5
  • Shure Update Utility 2.4.8
  • ShurePlus Channels 1.4.5
  • Wireless Workbench 6.13.3

Improvements

• Updated the firmware version number for the purpose of keeping all Axient Digital firmware version numbers aligned for brand-new system installations

Notes

• User Guides: SBC220 | SBC240
• To operate SBC220 or SBC240 1.2.109 with other Shure devices and software, see the following list of minimum versions:
  • Shure Update Utility 2.4.8
  • Wireless Workbench 6.13.3

Improvements

Updated the firmware version number for the purpose of keeping all Axient Digital firmware version numbers aligned for brand-new system installations

Notes

• User Guide
• To operate SBC840 version 1.2.109 with other Shure devices and software, see the following list of minimum versions:
  • Shure Update Utility 2.4.8
  • Wireless Workbench 6.13.3

Improvements

• Updated the firmware version number for the purpose of keeping all Axient Digital firmware version numbers aligned for brand-new system installations

Notes

• User Guide
• To operate SBC840M version 1.2.109 with other Shure devices and software, see the following list of minimum versions:
  • Shure Update Utility 2.4.8
  • Wireless Workbench 6.13.3