Shure Earphones: How do I clean the Shure Sound Isolating Earphones?

Shure Earphones: How do I clean the Shure Sound Isolating Earphones?

Date Updated: August 8, 2019 FAQ #5554
Question:
Shure Earphones: How do I clean the Shure Sound Isolating Earphones?
Answer:

Shure earphones furnish a cleaning tool. Use the wire loop of this tool to remove wax/debris build-up if you recognize any change in the overall output level. Make sure that you hold the earphone with the nozzle pointed downward while cleaning as it is desired to have the wax fall out of the nozzle, not accumulate in the center of the nozzle. When inserting the wire loop into the nozzle, the wire loop tip should rest against the edge of the damper; the side of the loop should rest against the side wall of the nozzle. Keep the wire loop tip against the edge of the damper/filter. Scrape the loop around the side wall while pulling it outwards to remove the wax. Do not press the loop deeper into the nozzle as this might puncture the damper/filter. Such damage will allow wax/debris to get into the transducer section of the earphone. Eventually, the audio signal will diminish or stop completely. At this point, the earphones must be sent to Shure Service/Repair.