50 results
-
- New
A910-HCM Hard Ceiling Mount
Allows MXA910 to be mounted flush in a drywall or hard ceiling, providing a more finished appearance. Mount can be pre-installed in the ceiling and the MXA910 installed later.from $239.00
-
- New
A310 Flush Mount
Allows MXA310 to be mounted flush in the table, reducing its footprint while maintaining acoustic performance and easy access to mute buttons. Black or aluminum.from $80.00
-
A75M Universal Microphone Mount
Universal Microphone Mount. Quick-release microphone mounting accessory for versatile and secure placement and removal. Included with BETA 98AMP.from $99.00
-
RK376
Replacement kit with 2 clips and 1 foam windscreen for CVL lavalier microphone.from $6.00
-
A89M-CC Lyre Mount with CCA
Lyre Mount with CCA. Developed by Shure with Rycote, Lyre mount fits into a standard camera clamp. Works with VP89S and VP89M.from $125.00
-
A89M-PG Pistol Grip Mount
Pistol Grip Mount. Developed by Shure with Rycote, adjustable handheld mount works with VP89S and VP89M.from $135.00
-
A89M-SH Shoe Mount
Developed by Shure with Rycote, shoe mount works with VP89S and VP89M.from $85.00
-
A89LM-BA Double Lyre Boom Adapter Mount
Double Lyre Boom Adapter Mount. Developed by Shure with Rycote, boom adapter mount secures VP89L to a boom pole.from $135.00
-
WA874ZP
The WA874ZP is a zippered pouch that fits the UA874 Active Directional Antenna.from $29.00
-
A15HP In-Line High Pass Filter
Balanced XLR in-line filter that reduces low frequencies below 100 Hz.from $56.00
-
A15LA 50 dB Attenuator
Reduces the level of an audio signal by 50dB, which allows a line level output to be connected to a microphone input.from $43.00
-
A15PRS Switchable Phase Reverser
Reverses the phase (polarity) of a balanced audio signal.from $75.00
-
A15RF In-Line RF Interference Attenuator
Reduces interference from AM radio stations that may bleed into microphone lines when using long cables.from $53.00
-
A15TG Tone Generator
Battery-powered 700 Hz signal source used to troubleshoot audio systems by checking microphone lines for correct patching and detecting unusual noise that is present.from $149.00
-
A120S In-Line On/Off Switch
In-line, balanced, locking or momentary switch for a microphone. Note: Requires soldering.from $29.00
-
A15BT Bridging Transformer
Matches, bridges, or isolates balanced and unbalanced devices of different impedances and levels. Male XLR to female XLR.from $53.00
-
AMV88-FUR
Rycote® Windjammer® for MV88.from $39.00
-
AMVL-FUR
Rycote® Windjammer® for MVL.from $25.00
-
A96F Camcorder Interface
Connects microphones with an XLR-type connector to the 3.5 mm inputs found on camcorders and other recording devices.from $68.00
-
S15A Tripod Floor Stand
Microphone stand, telescoping. Up to 14 ft., includes carrying case.from $197.00
-
A85F Line Matching Transformer
The Shure A85F is a low-to-high impedance microphone-matching transformer used to connect a balanced low-impedance microphone output to an unbalanced high impedance input on a mixer/recorder.from $20.00
-
A95UF Line Matching Transformer (XLR to 1/4" Male Plug/Female Jack)
Allows a balanced low-impedance microphone to be connected to an unbalanced high-impedance input.from $53.00
-
A2WS Locking Microphone Windscreen
Locking Microphone Windscreen reduces unwanted breath and wind noise. For use with Shure SM57 and 545 Series microphones. Available in black and gray.from $18.00
-
A95U Line Matching Transformer (Male XLR to 1/4" Male Plug/Female Jack)
Allows a high impedance microphone to be connected to balanced low-impedance inputs.from $53.00