Shure - Personal Monitor Systems - PSM 400 Wireless Personal Monitor System with Onstage Mix Control, P4MTRE3

PSM 400 Wireless Personal Monitor System with Onstage Mix Control, P4MTRE3

PSM®400 Wireless and Wired systems make professional quality personal monitoring available to more performers than ever before. Each system includes everything a working musician or band needs to receive consistent personal monitor mixes. Designed for performers who are tired of the limits of floor wedges, the PSM 400 offers hands-on control and freedom to musicians who have a limited budget for gear. With a wide range of available options - from complete Wireless and Wired systems to individual components - there is a PSM 400 that is right, rehearsal through performance, for almost everyone who performs live music.

P4MTRE3 Wireless Personal Monitor System includes P4M Personal Monitor Mixer, P4T Wireless Transmitter, P4R Wireless Receiver and gray SCL3 Sound Isolating Earphones.

P4MTRE3 Wireless Personal Monitor System with P4M Personal Monitor Mixer, P4T Wireless Transmitter, P4R Wireless Receiver and gray SCL3 Sound Isolating Earphones.

P4M Personal Monitor Mixer
A highly versatile stereo mic/line mixer for installed sound system applications and personal monitoring that provides easy access and\ control of up to four signals. Two additional auxiliary inputs can be used to add channels from other sources.
	1/2 rack Four level controls Four balance controls Four XLR - 1/4" mic/line inputs Two 1/4" TRS aux inputs Four split controls Two XLR = 1/4" TRS mix outputs External power supply

P4T Wireless Transmitter
	*Key Features*
	Built-in audio limiter External power supply Remotable/combinable antennas 1/2 rack space
	*Operating Controls*
	Earphone volume knob Frequency select
	*LED Indicators*
	4-segment input level Transmission Frequency
	*Inputs*
	Two 1/4" TRS line level
	*Outputs*
	Two 1/4" TRS loop outs Local earphone monitor

P4R Wireless Bodypack Receiver
	*Key Features*
	High-impact plastic chassis Frequency locator
	*Operating Controls*
	Operating mode (Stereo, Mono, MixMode) Volume knob Balance Defeatable limiter High-frequency boost Frequency select
	*Backlit LCD Indicators*
	RF reception Battery life Operating mode Frequency

SCL3 Sound Isolating Earphones
Single WideBand Microdrivers with incredible isolation for detailed tone across the frequency range.
	Specifications<
	Frequency Range: 25Hz – 18.5kHz Sensitivity (at 1 kHz): 115 dB SPL/mW Impedance (at 1 kHz) 26 ohms Weight: 28g (.9oz) Output Connector: Gold-plated stereo, 3.5 mm (1/8-inch) phone plug Cable Length: 1.57 m (62 inches)

P4M Personal Monitor Mixer

Measurement Conditions (unless otherwise specified):

full gain; 1 kHz, one channel activated; >source impedances: Mic 150 ohms, Aux Level 150 ohms; terminations: Line 600 ohms.

Frequency Response (Ref 1 kHz, controls centered)

20 Hz to 20 kHz +/- 2 dB

Input Specifications

	Input
	1-4 (front panel)	Aux In
Gain (Maximum)	43 dB	0 dB
Impedance (at 1 kHz)	5800 ohms	18 kilohm (each) 9100 ohms (1/L mono)
Input Clipping Level	+12 dBV	+12 dBV
Crosstalk	-100 dB	-90 dB
Common Mode Rejection	> 75 dB	> 70 dB

Output Specifications

	Output
	Split 1-4	Mix Out
Impedance	N/A	500 ohm (unbalanced) 1 kilohm (balanced
Output Clipping Level	N/A	+5 dBV (10 kilohm balanced load, -30 dBV input ch. 1-4)
Noise (100 Hz to 22 kHz)	-110 dBV	-100 dBV (all controls CCW) -62 dBV (all controls CW)
Distortion (THD) at 1 kHz	.0005%	<.05% (0 dBV output)
Crosstalk	-100 dB	-70 dB

LEDs: Resultant Mix Out Level

Green: -30 dBV

Yellow: -10 dBV

Red: 0 dBV

Current

120 mA max.

Power Requirements

Operating voltage 1418 Vdc

Supplied with one of the following external power supplies:

Model PS40: 120 Vac, 60 Hz input

Model PS40E, Model PS40UK: 230 Vac, 50/60 Hz input

NOTE: Courtesy DC connector is protected from short by a selfresetting "Polyfuse". Maximum recommended load is 250mA. (2 P4Ms or 1 P4T.)

Phantom Power

The P4M does not produce phantom power, but phantom power is allowed to pass through Split Outputs 14 to inputs 14 respectively.

Audio Polarity

All outputs in polarity with all inputs.

XLR Pin 2 is "hot" with respect to Pin 3; Pin 1 is ground.

1/4" TRS tip is "hot" with respect to ring; sleeve is ground.

Temperature Range

Operating: -7 degrees to 49 degrees C (20 degrees to 120 degrees F)

Storage: -29 degrees to 74 degrees C (-20 degrees to 165 degrees F)

Overall Dimensions

44 mm H x 218 mm W x 162 mm D (1.72 x 8.60 x 6.37 inches)

Net Weight: 1.20 Kg (2 lbs, 10 oz)

P4T Wireless Transmitter

RF Frequency Range

722 to 952 MHz (country dependent)

Operating Range

300 feet (environment dependent)

RF Output Power

50 mW (+17 dBm) typical conducted (country dependent)

Modulation Limiter

Internal peak limiter (>10:1 compression)

Antenna

External whip, 50 BNC connector

Power Requirements

Operating voltage 14-18 Vdc

Supplied with one of the following external power supplies:

Model PS40: 120 Vac, 60 Hz input.

Model PS40E, Model PS40UK: 230 Vac, 50/60 Hz input.

Current

250 mA maximum

Dimensions

219.2 mm X 43.6 mm X 136.5 mm (8.63 in. X 1.718 in. X 5.375 in.)

Net Weight

907.2 g (2 lbs., 0 oz.)

P4R Wirless Bodypack Reciever

RF Frequency Range: 722 to 952 MHz (country dependent)
Operating Range: 300 feet (environment dependent)
Audio Frequency Response: 50 Hz to 12 kHz (+/- 3 dB)
RF Sensitivity: 1 mV typical
Image Rejection: 55 dB typical
Spurious Rejection: 60 dB typical
Squelch Threshold: 4.5 mV typical
Antenna: attached whip
Power Requirements: 9 V alkaline battery
Battery Life: up to 8 hours, volume dependent
Audio Output Connector: 3.5 mm Stereo (Left = tip, Right = ring, Ground = sleeve)
Minimum Load Impedance: 16 ohms
Net Weight: 125 g (.28 lbs.)
Overall Dimensions: 82.6 mm X 63.5 mm X 26.2 mm (3 1/4 in. X 2 1/2 in. X 1 1/32 in.)