- Pro Audio Home >
- >
- >
P2R Hybrid Bodypack Receiver
PSM 200 System Components
The P2R Hybrid Bodypack Receiver is the world's first bodypack receiver to function as a wired receiver, a wireless receiver, or both at the same time. This and other unique features, along with excellent sound quality, make the P2R an exceptional value.
The P2R is the world's first bodypack receiver to function as a wired receiver, a wireless receiver, or both at the same time.
| Key Features | ||
|
||
| Operating Controls | ||
|
||
| LED Indicators | ||
|
||
- RF Sensitivity
- 109 dBm typical
- Squelch Threshold
- 102 dBm typical
- Antenna
- Attached Whip
- Audio Input Connector
-
- Connector Type: 1/4-inch Mono
- Impedance: 1 megohm
- Maximum Input Level: LO = +0 dBu; HI = 10 dBu
- Frequency Response: 30 Hz to 20 kHz (+/3 dB); earphone dependent
- Power Requirements
- 9 V alkaline battery, Duracell® type MN1604 recommended
- Battery Life
- Volume Dependent
- Wired (RF Off): 6 hours
- Wireless (RF On): 4 hours
- Audio Output Connector
- 1/8 inch (3.5 mm)
- Minimum Load Impedance
- 8 ohms
- Net Weight
- 100 g (3.52 oz.), less battery
- Overall Dimensions
- 122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)
PSM200 Ambient Packs
Utilizes a small lavaliere microphone to enable wired and wireless PSM200 users to mix ambient sound such as the audience applause with their isolated monitor mix.
PA213 PA214 PA215 Splitter Cables
PA200 series splitter cables split the signal from an instrument for connection to a P2R receiver and a wireless transmitter simultaneously. Three splitter cable models are available to allow compatibility with all Shure wireless bodypack transmitters.