Find an Answer

Browse our vast Answer database for answers to many common technical questions.

Sort by:

Most Popular Most Recent

Results per page:

10 25 50 100

Can I use more than one PSM receiver with just one transmitter?

Yes, you can use as many PSM receivers as you want to pick up the signal that a PSM transmitter is broadcasting. All the receivers will need to operate on the same frequency as the transmitter. All the receivers will pick up the ...

Point to point wireless using a Shure PSM system

Point to Point Wireless Audio Systems   Introduction Often it is desirable (or even mandatory) to send an audio signal from one fixed location to another fixed location without wires. This is termed "point-t...

Antenna tip color for bodypacks

Tip Color Frequency Range UR Frequency Band Axient Digital Frequency Band Model Yellow 470 - 530 MHz G...

PSM 900 vs PSM 1000 - primary differences

Here are the primary differences: PSM1000 - tuning range is 72 MHz (36 MHz - PSM900) PSM1000 - dual transmitter (P10T) in one chassis PSM1000 - receiver (P10R) has antenna diversity (non-diversity - PSM900) ...

P9T Rack Mount Hardware

RPW503 - Single rack mount kit RPW504 - Dual rack mount kit (two P9T units in one rack space) Available from Shure Parts and Service.  The P9T has the same chassis as these other Shure units: BLX4R P3T P...

Using a PSM300 device with a PSM900 device and vice versa

While PSM300 and PSM900 use similar companding and RF transmission schemes, we do not recommend using them in a "mixed" configuration where you are using a PSM300 transmitter with a PSM900 receiver or vice versa. This i...

P9RA versus P9R - what are the differences?

Introduced in October 2011 and replacing the P9R, the P9RA has new features and improvements: Improved separation in Mix Mode: Channel to channel separation in P9RA Mix Mode is approximately 60dB.  In the P9R, it was...

Extra Battery Terminals ULXD1, P9RA, P10R, UR5

The extra contacts only support functionality of the optional SB900A Li-ion rechargeable battery pack. The battery microcontroller communications terminal (on the left) provides the "time remaining" information tha...

P9HW, P3R, P3RA Headphone Output Power

Headphone Output Power (both channels driven): 80mW/channel @ 32 ohms. Headphone Output Power (single channel driven): 120mW @ 32 ohms.   Headphone Output Impedance: <2.5  ohms Designed to dr...

Carrier for two AA Cells / Batteries

This accessory secures two AA cells (batteries) into the battery compartment of the ULXD1, PR9RA, P10R, and UR5.  Some brands of AA cells have slightly smaller dimensions than others. This plastic carrier properly positions ...

  • Page 1 of 4
  1. 1
  2. 2
  3. 3
  4. 4
Ask a Question

Contact Service & Repair

Telephone: (800) 516-2525

Fax: (847) 600-8686

Contact Product Support

Telephone: (312) 736-6006