Find an Answer

Browse our vast Answer database for answers to many common technical questions.

Sort by:

Most Popular Most Recent

Results per page:

10 25 50 100

PA213 Cable Information

PA213: This cable is designed for the guitarist who is completely wireless and uses a P2R for their monitor and a body pack transmitter that takes a 1/4" jack as input. This cable allows a guitarist to control their own leve...


Compatibility - PSM400 and PSM600

No. The PSM400 receivers can not be used to pickup signals from the PSM 600 transmitter. They use two entirely different frequency ranges.


Are my earbuds compatible with your PSM system?

All Shure in-the-ear monitors use 1/8" stereo headphone connections, so your custom ear pieces will work fine with any of our PSM systems. Basically, the PSM700 offers full frequency agility, where as the PSM600 only of...


AP200K cable information

AP200K: This is a cable assembly that allows a user to adjust the level of an ambient mic, such as the Shure WL93 (not supplied), that connects into the P2R 1/4" input jack. The AP200k consist of a TA4M connector, pream...


PSM transmitter antenna orientation

The angle of the transmitting antenna should "match" the angle of the receiving antenna. If you don't know the angle of the receiving antenna, place the transmitting antenna up 45 degrees from horizontal; it is...


Left signal bleeding into right, and vice versa

Stereo separation with a wireless PSM system (PSM400, PSM600, PSM700) is 35 dB.  This applies to MixMode as well. The limitation exists because PSM uses multiplexed stereo to achieve the two channels.  This means that t...


I need 4 separate monitor mixes. Can I do this with 1 transmitter?

No. At a minimum you will need two stereo transmitters. Each transmitter can send one stereo mix or two mono mixes.


Information on in-the-ear personal monitors?

Please download the "Selection and Operation of Personal Monitor Systems". This booklet will help educate you on personal monitors. Also read: The ABC’s of Configuring a Personal Monitor System


How many PSM700 receivers can be used at the same time?

The maximum number of PSM700 transmitters that can be used simultaneously is 16. (Unless there are particular TV transmitters in the immediate vicinity which would lower the maximum number of available frequencies.) Each tra...


PSM Input and Output Impedance

The impedance of the XLR input connector is 20k ohms. The impedance of the 1/4" loop-through female phone jack is 20k ohms. At 04/11/2001 10:21 AM we wrote - The receiver audio output is designed to drive earphones that...


  • Page 6 of 9
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
Ask a Question

Contact Service & Repair

Telephone: (800) 516-2525

Fax: (847) 600-8686

Contact Product Support

Telephone: (312) 736-6006