I have a client who owns an AKG wireless system. It comprises of a SR-61 receiver and a PT-61 belt pack transmitter. The microphone that comes with it needed to be replaced and my colleague has convinced him on a Shure WL184.
I am hoping you can advise me on the correct pin configuration for the mic to be integrated to the wireless system. I have tried several myself and it didn't work very well. The AKG transmitter comes with a 3-pin "mini-xlr". The only info I have on the beltpack's input: << Pin1: gnd, Pin2: audio in, Pin3: +bias(7volts via internal resistor of about 7.6 kohms) condenser mics requires pins 2 & 3 to be linked>>
Certainly hope you can help in the above. I suspect that I may need an optional item to match the impedances or supply the phantom power. Do point me in the right direction.
Here is our suggestion based on the information you supplied on the AKG unit:
WL184 shield wire to AKG pin 1
WL184 black wire to AKG pin 2
WL184 red wire to AKG pin 3
You should require no additional items.