I would like to use your I series or Quietspot with the V710. Do I need an adapter?
If you want to just use our Quietspot headset for speech only then there is no adapter needed. The correct Quietspot for the V710 is the QSHB3 or QSHI3. There is two adapters available for the Motorola V710 that enable the I Series or E series earphones to be used. One that converts 2.5mm to standard 3.5m for headphones only (PPCPADPT15) and one that splits the 2.5mm for headphones and a headset for use with our dual connector version (PPCPADPT16). The single connector I series will only work with the treo as they use a different connector system within the cable. Same connector but the wiring is different inside. If you just want to listen to music and not use the I series as a speech device then buy the E series earphones with PPCPADPT15. If you want to listen to music and talk through the headset use the PPCPADPT16 adapter with the I series dual connector. The Adpaters are from www.pocketpctechs.com and the direct link is below. The reason for the adapters is to be able to listen to STEREO music through our earphones. Hope this clears things up.