Do you have any data you can share on the straddle / link bars used for mounting the SCM410? Overall dimensions, hole locations, and hole size?
This metal link bars is shipped with the SCM410.
Length: 132 mm
Width: 19 mm
Thickness: 2 mm
Countersunk Hole diameter: circa 5 mm. There are four holes.
Center of hole is 15 mm down for the narrow end of the bracket. Center of hole is 4 mm in from long side each of bracket.
All measurements taken by eye using an actual bar and a millimeter rule. Any/all measurements above can be off by 1 mm.