What is a recommended external DC power supply for the AXT610 Access Point?
External AC Power Supply Specifications for SHURE AXT610 AXIENT Access Point
Output Voltage: 15 Vdc
Current: 600 mA (minimum)
DC Output Connector: 2.1 x 5.5 mm barrel (coaxial), center pin positive, preferably with locking collar
Note: The AXT610 is equipped with a locking collar to prevent the DC connector from falling out. It is not required to use a locking collar connector, but if a non-locking connector is used the cable should be secured to prevent a DC power failure.
AC Input: 120 Vac for North American applications
AC Input Type: 3-wire grounded cord preferred
Suggested Power Supply Models - available from Mouser Electronics, www.mouser.com, and other electronics suppliers
Triad Magnetics model WDU15-600 - unregulated 15 Vdc, 600 ma linear power supply, 120 Vac input, non-locking barrel connector, wall mount, 2 prong AC connector
Mean Well model GS18A15-P1J - regulated 15 Vdc, 1.2 A switching power supply, three wire line cord (obtain separately), 90 - 264 Vac input, in-line module, non-locking barrel connector, LED power indicator
Phihong model PSA-A18U-150-R - regulated 15 Vdc, 1.2 A switching power supply, three wire line cord (obtain separately), 90 - 264 Vac input, in-line module, non-locking barrel connector
Note: Optional DC barrel connector with locking collar available for retrofit - Switchcraft model S760K