• Page 6 of 35
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 35
Filter by: Date Posted Filter by: Title Filter by: Version Associated Products Filter by: File Size
May 19, 2017 ULXD4Q - Quad Channel Digital Wireless Receiver 2.1.16 See release notes Download PACK (5.42 mb)

IMPORTANT

ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

IMPROVEMENTS

  • Compatibility with new products:
    • ULXD6 Wireless Boundary Microphone Transmitter
    • ULXD8 Wireless Gooseneck Base Transmitter
    • SBC450 4-Bay Networked Charging Station 
    • SBC850 8-Bay Networked Charging Station
  • New TPCI commands for charging stations, receivers, and transmitters
  • Bug fixes
    • Custom groups for AB/JB bands now correctly transfer via IR sync
    • Antenna power alert will persist until it is cleared
    • Fixed a sporadic issue of transmitter firmware updates failing

KNOWN ISSUE

  • ULX-D version 2.1.16 is not compatible with SystemOn 2.1

NOTES

  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER
  • Maintain an IR connection when updating transmitter firmware via IR sync. In rare occasions, upgrades from 1.5.6 or earlier to 1.6.6 or later can cause transmitters to become non-responsive temporarily. If the update fails and the unit is non-responsive, resolve the issue by following these steps:
    • Using the Shure Update Utility, downgrade the firmware for the ULXD4/ULXD4D/ULXD4Q Receiver to 1.5.6 AND keep the desired transmitter firmware (1.6.6 or later).
    • Update the transmitter firmware to 1.6.6 or later via IR menu. From the receiver menu: DEVICE UTILITIES > TX FW UPDATE. Align the infrared ports with the transmitter and then press ENTER.
    • Upgrade receiver to 1.6.6 or later.
  • To operate ULX-D devices on version 2.1.16 with other Shure networked systems and software, see the following list of minimum software versions:

 

May 19, 2017 ULXD4Q - Extended Bands Quad Channel Digital Wireless Receiver 2.1.16 See release notes Download PACK (5.42 mb)

IMPORTANT

ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

IMPROVEMENTS

  • Compatibility with new products:
    • ULXD6 Wireless Boundary Microphone Transmitter
    • ULXD8 Wireless Gooseneck Base Transmitter
    • SBC450 4-Bay Networked Charging Station 
    • SBC850 8-Bay Networked Charging Station
  • New TPCI commands for charging stations, receivers, and transmitters
  • Bug fixes
    • Custom groups for AB/JB bands now correctly transfer via IR sync
    • Antenna power alert will persist until it is cleared
    • Fixed a sporadic issue of transmitter firmware updates failing

KNOWN ISSUE

  • ULX-D version 2.1.16 is not compatible with SystemOn 2.1

NOTES

  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER
  • Maintain an IR connection when updating transmitter firmware via IR sync. In rare occasions, upgrades from 1.5.6 or earlier to 1.6.6 or later can cause transmitters to become non-responsive temporarily. If the update fails and the unit is non-responsive, resolve the issue by following these steps:
    • Using the Shure Update Utility, downgrade the firmware for the ULXD4/ULXD4D/ULXD4Q Receiver to 1.5.6 AND keep the desired transmitter firmware (1.6.6 or later).
    • Update the transmitter firmware to 1.6.6 or later via IR menu. From the receiver menu: DEVICE UTILITIES > TX FW UPDATE. Align the infrared ports with the transmitter and then press ENTER.
    • Upgrade receiver to 1.6.6 or later.
  • To operate ULX-D devices on version 2.1.16 with other Shure networked systems and software, see the following list of minimum software versions:

 

May 19, 2017 ULXD4Q - 900 MHz ISM Quad Channel Digital Wireless Receiver 2.1.16 See release notes Download PACK (5.42 mb)

IMPORTANT

ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

IMPROVEMENTS

  • Compatibility with new products:
    • ULXD6 Wireless Boundary Microphone Transmitter
    • ULXD8 Wireless Gooseneck Base Transmitter
    • SBC450 4-Bay Networked Charging Station 
    • SBC850 8-Bay Networked Charging Station
  • New TPCI commands for charging stations, receivers, and transmitters
  • Bug fixes
    • Custom groups for AB/JB bands now correctly transfer via IR sync
    • Antenna power alert will persist until it is cleared
    • Fixed a sporadic issue of transmitter firmware updates failing

KNOWN ISSUE

  • ULX-D version 2.1.16 is not compatible with SystemOn 2.1

NOTES

  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER
  • Maintain an IR connection when updating transmitter firmware via IR sync. In rare occasions, upgrades from 1.5.6 or earlier to 1.6.6 or later can cause transmitters to become non-responsive temporarily. If the update fails and the unit is non-responsive, resolve the issue by following these steps:
    • Using the Shure Update Utility, downgrade the firmware for the ULXD4/ULXD4D/ULXD4Q Receiver to 1.5.6 AND keep the desired transmitter firmware (1.6.6 or later).
    • Update the transmitter firmware to 1.6.6 or later via IR menu. From the receiver menu: DEVICE UTILITIES > TX FW UPDATE. Align the infrared ports with the transmitter and then press ENTER.
    • Upgrade receiver to 1.6.6 or later.
  • To operate ULX-D devices on version 2.1.16 with other Shure networked systems and software, see the following list of minimum software versions:

 

May 19, 2017 ULXD4D - Extended Bands Dual Channel Digital Wireless Receiver 2.1.16 See release notes Download PACK (4.96 mb)

IMPORTANT

ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

IMPROVEMENTS

  • Compatibility with new products:
    • ULXD6 Wireless Boundary Microphone Transmitter
    • ULXD8 Wireless Gooseneck Base Transmitter
    • SBC450 4-Bay Networked Charging Station 
    • SBC850 8-Bay Networked Charging Station
  • New TPCI commands for charging stations, receivers, and transmitters
  • Bug fixes
    • Custom groups for AB/JB bands now correctly transfer via IR sync
    • Antenna power alert will persist until it is cleared
    • Fixed a sporadic issue of transmitter firmware updates failing

KNOWN ISSUE

  • ULX-D version 2.1.16 is not compatible with SystemOn 2.1

NOTES

  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER
  • Maintain an IR connection when updating transmitter firmware via IR sync. In rare occasions, upgrades from 1.5.6 or earlier to 1.6.6 or later can cause transmitters to become non-responsive temporarily. If the update fails and the unit is non-responsive, resolve the issue by following these steps:
    • Using the Shure Update Utility, downgrade the firmware for the ULXD4/ULXD4D/ULXD4Q Receiver to 1.5.6 AND keep the desired transmitter firmware (1.6.6 or later).
    • Update the transmitter firmware to 1.6.6 or later via IR menu. From the receiver menu: DEVICE UTILITIES > TX FW UPDATE. Align the infrared ports with the transmitter and then press ENTER.
    • Upgrade receiver to 1.6.6 or later.
  • To operate ULX-D devices on version 2.1.16 with other Shure networked systems and software, see the following list of minimum software versions:

 

May 19, 2017 ULXD4D - Dual Channel Digital Wireless Receiver 2.1.16 See release notes Download PACK (4.97 mb)

IMPORTANT

ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

IMPROVEMENTS

  • Compatibility with new products:
    • ULXD6 Wireless Boundary Microphone Transmitter
    • ULXD8 Wireless Gooseneck Base Transmitter
    • SBC450 4-Bay Networked Charging Station 
    • SBC850 8-Bay Networked Charging Station
  • New TPCI commands for charging stations, receivers, and transmitters
  • Bug fixes
    • Custom groups for AB/JB bands now correctly transfer via IR sync
    • Antenna power alert will persist until it is cleared
    • Fixed a sporadic issue of transmitter firmware updates failing

KNOWN ISSUE

  • ULX-D version 2.1.16 is not compatible with SystemOn 2.1

NOTES

  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER
  • Maintain an IR connection when updating transmitter firmware via IR sync. In rare occasions, upgrades from 1.5.6 or earlier to 1.6.6 or later can cause transmitters to become non-responsive temporarily. If the update fails and the unit is non-responsive, resolve the issue by following these steps:
    • Using the Shure Update Utility, downgrade the firmware for the ULXD4/ULXD4D/ULXD4Q Receiver to 1.5.6 AND keep the desired transmitter firmware (1.6.6 or later).
    • Update the transmitter firmware to 1.6.6 or later via IR menu. From the receiver menu: DEVICE UTILITIES > TX FW UPDATE. Align the infrared ports with the transmitter and then press ENTER.
    • Upgrade receiver to 1.6.6 or later.
  • To operate ULX-D devices on version 2.1.16 with other Shure networked systems and software, see the following list of minimum software versions:

 

May 19, 2017 ULXD4D - 900 MHz ISM Dual Channel Digital Wireless Receiver 2.1.16 See release notes Download PACK (4.95 mb)

IMPORTANT

ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

IMPROVEMENTS

  • Compatibility with new products:
    • ULXD6 Wireless Boundary Microphone Transmitter
    • ULXD8 Wireless Gooseneck Base Transmitter
    • SBC450 4-Bay Networked Charging Station 
    • SBC850 8-Bay Networked Charging Station
  • New TPCI commands for charging stations, receivers, and transmitters
  • Bug fixes
    • Custom groups for AB/JB bands now correctly transfer via IR sync
    • Antenna power alert will persist until it is cleared
    • Fixed a sporadic issue of transmitter firmware updates failing

KNOWN ISSUE

  • ULX-D version 2.1.16 is not compatible with SystemOn 2.1

NOTES

  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER
  • Maintain an IR connection when updating transmitter firmware via IR sync. In rare occasions, upgrades from 1.5.6 or earlier to 1.6.6 or later can cause transmitters to become non-responsive temporarily. If the update fails and the unit is non-responsive, resolve the issue by following these steps:
    • Using the Shure Update Utility, downgrade the firmware for the ULXD4/ULXD4D/ULXD4Q Receiver to 1.5.6 AND keep the desired transmitter firmware (1.6.6 or later).
    • Update the transmitter firmware to 1.6.6 or later via IR menu. From the receiver menu: DEVICE UTILITIES > TX FW UPDATE. Align the infrared ports with the transmitter and then press ENTER.
    • Upgrade receiver to 1.6.6 or later.
  • To operate ULX-D devices on version 2.1.16 with other Shure networked systems and software, see the following list of minimum software versions:

 

May 19, 2017 QLXD1/2 - 900 MHz ISM Wireless Transmitters 2.1.5 See release notes Download PACK (261 kb)

IMPORTANT

QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

IMPROVEMENTS

  • Support for new frequency bands:
    • Europe: Z17: 1492 – 1525 MHz
    • Europe: Z18: 1785 – 1805 MHz
    • Australia: Z19: 1785 – 1800 MHz
    • Taiwan
      • Z20: 1790 – 1805 MHz
      • G62: 510 – 530 MHz
  • Compatibility with new products:
    • ULXD6 Wireless Boundary Microphone Transmitter
    • ULXD8 Wireless Gooseneck Base Transmitter
    • SBC450 4-Bay Networked Charging Station
    • SBC850 8-Bay Networked Charging Station
  • Bug fixes

NOTE

  • To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
  • To operate QLX-D version 2.1.5 devices with other Shure networked systems and software, see the following list of minimum versions:
May 19, 2017 ULXD6/8 - Transmitters 2.1.16 See release notes Download PACK (277 kb)

NEW FEATURE

  • Initial release

KNOWN ISSUE

  • ULXD6/8 version 2.1.16 transmitters are not compatible with SystemOn 2.1.

NOTES

  • ULXD6/8 User Guide
  • To update firmware for ULXD6/8 transmitters with ULX-D or QLX-D receivers:
    1. Update receivers to the following minimum versions:
      • ULXD4, ULXD4D, ULXD4Q Receivers 2.1.16
      • QLXD4 Receivers 2.1.5 2
    2. Using Shure Update Utility, download ULXD6/8 transmitter firmware to the receivers.
    3. Using the FW Update menu on a receiver, update transmitters.
  • ULXD6/8 transmitters can receive firmware updates while docked in an SBC450 or SBC850 Networked Charging Station.
    1. Place transmitters on charging station and ensure charging station is connected to the network.
    2. Launch Shure Update Utility to find firmware updates.
    3. Download updates and click Send Updates.
  • To operate ULXD6/8 version 2.1.16 devices with other Shure networked systems and software, see the following list of minimum versions:
May 19, 2017 ULXD6/8 -900 MHz ISM Transmitters 2.1.16 See release notes Download PACK (284 kb)

NEW FEATURE

  • Initial release

KNOWN ISSUE

  • ULXD6/8 version 2.1.16 transmitters are not compatible with SystemOn 2.1.

NOTES

  • ULXD6/8 User Guide
  • To update firmware for ULXD6/8 transmitters with ULX-D or QLX-D receivers:
    1. Update receivers to the following minimum versions:
      • ULXD4, ULXD4D, ULXD4Q Receivers 2.1.16
      • QLXD4 Receivers 2.1.5 2
    2. Using Shure Update Utility, download ULXD6/8 transmitter firmware to the receivers.
    3. Using the FW Update menu on a receiver, update transmitters.
  • ULXD6/8 transmitters can receive firmware updates while docked in an SBC450 or SBC850 Networked Charging Station.
    1. Place transmitters on charging station and ensure charging station is connected to the network.
    2. Launch Shure Update Utility to find firmware updates.
    3. Download updates and click Send Updates.
  • To operate ULXD6/8 version 2.1.16 devices with other Shure networked systems and software, see the following list of minimum versions:
May 19, 2017 SBC450/850 - Networked Charging Station 2.1.16 See release notes Download PACK (441 kb)

NEW FEATURE

  • Initial release

KNOWN ISSUE

  • SBC450/850 version 2.1.16 Networked Charging Stations are not compatible with SystemOn 2.1

NOTES

  • SBC450/850 User Guide
  • ULXD6/8 transmitters can receive firmware updates while docked in an SBC450 or SBC850 Networked Charging Station.
    1. Place transmitters on charging station and ensure charging station is connected to the network.
    2. Launch Shure Update Utility to find firmware updates.
    3. Download updates and click Send Updates.
  • To operate SBC450/850 version 2.1.16 devices with other Shure networked systems and software, see the following list of minimum versions: