• Page 1 of 37
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 37
Filter by: Date Posted Filter by: Title Filter by: Version Associated Products Filter by: File Size
November 23, 2017 DDS 5900 and DCS 6000 8.2.2 See release notes Download ZIP (174 mb)

Important

  • This firmware release can be used to upgrade units in a DDS 5900 or a DCS 6000 systems using CU 5905, CU 6105, CU 6110 or DIS CCU Central Units.
  • The CU 6000, CU 6005, CU 6010 and CU 6011 Central Units are not supported in this release.
  • The DIS FUU Firmware Upgrade Utility, which is part of this firmware release, must be used when upgrading

New Features

  • CU/CUU: Added multi-language support for WEB-UI and Name Sign.
  • CU 5905/CCU(5900 mode) - Support for TPCI mic_attenuation command

Improvements

  • CU/CCU - Ensures channel selectors get language abbreviation on/off setting repeatedly.
  • SW6000, CU – Fixed the clearing request list so that the individual request Off comes before Clear Request List
  • CU/CCU - Fixed CU response with Mic on, when sending microphone on message to an Interpreter that is not connected to the CU
  • CU/CCU - CU is no longer resetting if interpreter settings are reset while the interpreter microphone is active
  • CU/CCU - WEB-UI "View Open Source Licenses" now shows open source licenses instead of a "404 Not Found" html page
  • CS6340F - After CU starts up, channel OLED on CS6340F now correctly shows channel language abbreviation instead of channel number
  • IS6132 – There is no longer an audible difference in sound level on CU audio output, when comparing floor sound and interpreted audio
  • SW6000, Interpreter, CU61xx, - Interpreter status is now correctly marked as "Lost" if unregistered rather than "Not Lost" and leading to wrong status in SW6000
  • DC59xx – Fixed the "All delegate off" LED so that it is not ON when the button is pressed on DC59xx chairman units
  • CU/CCU – In operation mode FIFO, the request list is now restored to speak list when selecting "All del off" on the WEB-UI

Notes

March 31, 2017 DDS 5900 and DCS 6000 8.2 See release notes Download ZIP (174 mb)

IMPORTANT

  • This firmware release can be used to upgrade units in a DDS 5900 or a DCS 6000 systems using CU 5905, CU 6105, CU 6110 or DIS CCU Central Units.
  • The CU 6000, CU 6005, CU 6010 and CU 6011 Central Units are not supported in this release.
  • The DIS FUU Firmware Upgrade Utility, which is part of this firmware release, must be used when upgrading

NEW FEATURES

  • Support of Shure Name Sign
  • Support for individual microphone attenuation control in 5900 mode on the CU/CCU GUI
October 18, 2016 DDS 5900 and DCS 6000 8.0.5 See release notes Download ZIP (155 mb)

NEW FEATURES

  • DC6990P - Support for colours on voting buttons
  • 6000, 5900 - Support for "Speak Button Lock". Settings available from CU5905/CU6110/CCU web interface. The ‘Lock Override Time (Long Push Time)’ and the ‘Lock Duration’ is settable from the web interface.
  • 6000, 5900 - Support for "Allow Mic Off". Settings available from CU5905/CU6110/CCU web interface
  • DC6990, DC6190, DM6680, DC59xx - Support for "Long Push" to overrule Speak Button Lock

IMPROVEMENTS

  • CU5905/CU6110/CCU – Audio In Volume, Level & Muted settings were not stored correctly in CU configuration. Making changes to Audio In 1 caused changes to be used for Audio In 2 after next reboot and vice versa
  • CU61xx, CCU - Electrical clicking noise removed from interpreter microphone LED when microphone is activated
  • CU5905/CU6110/CCU – Setting Audio In2 -> Loudspeaker from front plate does not work
  • CU61xx, CCU - Setting an Interpreter Unit to same A and B outgoing channel will cause audio to become lost if interpreter switch outgoing channel between A and B with Interpreter Unit engaged
  • PCB6000 (Flush mounted units) - Vote LED indication not correctly updated on chip card login during voting session if user has voted previously in the same session
  • DC6990P – Speech time not stopped on delegates during Exclusive On
  • DC6990P – Seat names not updated correctly on unit type change

FIRMWARE UPGRADE UTILITY (FUU) V1489

  • An issue in FUU was fixed where units with old firmware were cleared on a CU6010 when they became locked - hereby preventing an upgrade. (CONFFW-558)
  • Timestamps added to Upgrade Log.
  • FUU will now by default look for a FUU library in a the released folder structure.
October 02, 2015 DDS 5900 and DCS 6000 7.5.10 See release notes Download ZIP (151 mb)

IMPROVEMENT

DC6120P - fixed bug causing missing audio on DC6120 units

October 16, 2017 MXW1/2/6/8 - Transmitters 5.1.26 See release notes Download PACK (312 kb)

Improvements

  • Fixed an issue on the MXWANI control software that prevented channels name changes that were more than 12 characters.
  • .svn files removed from the HTML directories of MXWANI4/8.

Known Issues

  • During Spectrum Scan, modifying MXWAPT configuration settings can put the device in a non-deterministic state. If configuration settings are modified during Spectrum Scan, MXWAPT must be rebooted.
  • Microflex Wireless 5.1.26 is not supported by SystemOn version 3.0.

Notes

  • Microflex Wireless firmware version 5.1.26 does not support AES67.
  • To operate MXW version 5.1.26 with other Shure networked systems, see the following list of minimum software and firmware versions:
October 16, 2017 MXWNCS2/4/8 - Networked Charging Station 5.1.26 See release notes Download PACK (1.42 mb)

Improvements

  • Fixed an issue on the MXWANI control software that prevented channels name changes that were more than 12 characters.
  • .svn files removed from the HTML directories of MXWANI4/8.

Known Issues

  • During Spectrum Scan, modifying MXWAPT configuration settings can put the device in a non-deterministic state. If configuration settings are modified during Spectrum Scan, MXWAPT must be rebooted.
  • Microflex Wireless 5.1.26 is not supported by SystemOn version 3.0.

Notes

  • Microflex Wireless firmware version 5.1.26 does not support AES67.
  • To operate MXW version 5.1.26 with other Shure networked systems, see the following list of minimum software and firmware versions:
October 16, 2017 MXWANI4 - Audio Network Interface 5.1.26 See release notes Download PACK (4.92 mb)

Improvements

  • Fixed an issue on the MXWANI control software that prevented channels name changes that were more than 12 characters.
  • .svn files removed from the HTML directories of MXWANI4/8.

Known Issues

  • During Spectrum Scan, modifying MXWAPT configuration settings can put the device in a non-deterministic state. If configuration settings are modified during Spectrum Scan, MXWAPT must be rebooted.
  • Microflex Wireless 5.1.26 is not supported by SystemOn version 3.0.

Notes

  • Microflex Wireless firmware version 5.1.26 does not support AES67.
  • To operate MXW version 5.1.26 with other Shure networked systems, see the following list of minimum software and firmware versions:
October 16, 2017 MXWANI8 - Audio Network Interface 5.1.26 See release notes Download PACK (4.92 mb)

Improvements

  • Fixed an issue on the MXWANI control software that prevented channels name changes that were more than 12 characters.
  • .svn files removed from the HTML directories of MXWANI4/8.

Known Issues

  • During Spectrum Scan, modifying MXWAPT configuration settings can put the device in a non-deterministic state. If configuration settings are modified during Spectrum Scan, MXWAPT must be rebooted.
  • Microflex Wireless 5.1.26 is not supported by SystemOn version 3.0.

Notes

  • Microflex Wireless firmware version 5.1.26 does not support AES67.
  • To operate MXW version 5.1.26 with other Shure networked systems, see the following list of minimum software and firmware versions:
October 16, 2017 MXWAPT2 - Access Point Transceiver 5.1.26 See release notes Download PACK (7.75 mb)

Improvements

  • Fixed an issue on the MXWANI control software that prevented channels name changes that were more than 12 characters.
  • .svn files removed from the HTML directories of MXWANI4/8.

Known Issues

  • During Spectrum Scan, modifying MXWAPT configuration settings can put the device in a non-deterministic state. If configuration settings are modified during Spectrum Scan, MXWAPT must be rebooted.
  • Microflex Wireless 5.1.26 is not supported by SystemOn version 3.0.

Notes

  • Microflex Wireless firmware version 5.1.26 does not support AES67.
  • To operate MXW version 5.1.26 with other Shure networked systems, see the following list of minimum software and firmware versions:
October 16, 2017 MXWAPT4 - Access Point Transceiver 5.1.26 See release notes Download PACK (7.75 mb)

Improvements

  • Fixed an issue on the MXWANI control software that prevented channels name changes that were more than 12 characters.
  • .svn files removed from the HTML directories of MXWANI4/8.

Known Issues

  • During Spectrum Scan, modifying MXWAPT configuration settings can put the device in a non-deterministic state. If configuration settings are modified during Spectrum Scan, MXWAPT must be rebooted.
  • Microflex Wireless 5.1.26 is not supported by SystemOn version 3.0.

Notes

  • Microflex Wireless firmware version 5.1.26 does not support AES67.
  • To operate MXW version 5.1.26 with other Shure networked systems, see the following list of minimum software and firmware versions: