The Shure ULX® Standard receiver offers an exceptional value in both performance and price, for both working musicians and sound installers.
The feature set of the versatile ULXS4 receiver offers a direct path to full, clear audio signals, unencumbered and unattached.
Rack hardware is not included with ULXS4 receiver.
For use with ULX Standard Wireless systems.
Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.
ULXS4 Wireless Diversity Receiver
- Automatic Frequency Selection with group scan function
- Up to 1440 selectable frequencies
- 5-segment transmitted audio signal strength meter
- RF indicator
- 3-segment transmitter battery fuel gauge
- Advanced multi-function LCD displays group and channel
- Mic/Line switch
- Detachable 1/4-wave antenna
- XLR and 1/4-inch output
- Rugged plastic chassis
- 1/2 rack design
FCC Consumer Alert (U.S.)
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change.
For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.
|Weight||1105 g (2 lbs, 7 oz.)|
Additional specifications are available in the user guide.
PS43USEnergy-efficient external switching mode 15V DC power supply for use with GLXD4, GLXD4R, ULXS4, ULXP4, P9T, PS9, SBC-DC, and AXT610.
UA506 Single Rack Mount KitRack hardware for single ULX receiver, P4M, P4T, DFR11EQ5, DP11EQ, SCM262 or SCM268
UA507 Dual Rack Mount HardwareRack hardware for Dual ULX Receivers, P4M, P4T, DFR11EQ5, DP11EQ, SCM262 or SCM268
UA8 1/2 Wave Omnidirectional Receiver AntennaUA8 is a 1/2 wave omnidirectional receiver antenna for UHF-R®, ULX®, SLX®, QLX-D®, ULX-D®, and BLX4R receivers (frequency range dependent) and PSM transmitters.
UABIAST In-Line Power SupplyIn-line adapter that supplies 12V DC bias power over coaxial BNC cable.
Difference between ULXP4 and ULXS4 Receivers
The following table lists the differences between the two ULX receivers. ...
Mounting SLX4 and ULX4 side-by-side
If the ULXP is purchased with the SLX, both systems come with mounting hardware to mount side ...
UA506 and UA507 Rack Ears
UA506 has a short rack ear #53E8484 (1.1 inch wide) and a long rack ear #53F8484 (9....
Rackmounting my ULXS4
Rack mount it using the UA506 kit. Bring the antennas to the front with the UA600 kit.
ULX4 receiver in a half rack space
The width of a ULXP4 or ULXS4 is 8.56 inches. With two of the 53E8484 short rack mo...
ULXS4 or ULXP4 Receiver - powering from external DC
The ULX receiver works properly only when supplied 14 to 18 volts of DC. The current draw is 5...
Instructional articles, guides, demos and more! Our experts offer industry-proven tips and tricks to help you get the most from your gear.
Service & Repair
Detailed policy information regarding customer service numbers, service modifications, and replacement parts.