Shure Americas | ULX2 Handheld Transmitter

ULX-S Wireless

Large Product Image prod_img_ulx2_sm58_l

Additional Views Additional Views Additional Views Additional Views

ULX2Handheld Transmitter

Shure

A choice of legendary Shure vocal microphones is available for use with the ULX Standard series of handheld wireless transmitters. Choose from SM and BETA Series microphones to ride the clear channel transmission and flexibility of ULX handheld transmitters.

The transmitter design allows for interchangeable microphone cartridges. Options include the BETA 87A, BETA 58A, SM86, and the legendary SM58.

For use with ULX Standard Wireless systems.

FCC Consumer Alert (U.S.)

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change.

For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.

Available Options

ULX2/58	SM58 Microphone w/ ULX2 Handheld Transmitter (shown)
ULX2/SM86	SM86 Microphone w/ ULX2 Handheld Transmitter
ULX2/87	SM87 Microphone w/ ULX2 Handheld Transmitter
ULX2/BETA58	BETA 58A Microphone w/ ULX2 Handheld Transmitter
ULX2/BETA87A	BETA 87A Microphone w/ ULX2 Handheld Transmitter
ULX2/BETA87C*	BETA 87C Microphone w/ ULX2 Handheld Transmitter

8-9 Hour Battery Life
Power: On/Off Switch, Battery
LED-Green When ON, Red When Battery Low
Three-segment Battery Power Icon
PEAK Icon-Appears When Audio Signal Overloads
Group/Channel Displays
SET Button for Saving Settings
Adjustable Audio Gain Control

Input Attenuation Switch-Select 0dB for Voice/Low Output; 20dB for High Output
4-pin Mini Connector
Battery Cover Unscrews to Expose Battery and Gain Control
9V Battery Included
Interchangeable cartidges: SM58, SM86, SM87A, Beta58, Beta87C.

ULX2 Transmitter Input

Configuration	Unbalanced, active
Actual Impedance	20 kilohms
Maximum Input Level (1 kHz, 1% THD)	12 dBV (10 Vp.p)

RF Carrier Frequency Range

470.000 to 865.000 MHz (Available frequencies depend on the applicable regulations in the country where the system is used). Refer to the frequency supplement supplied with the system.

Effective Range

100 m (300 ft.) under optimal conditions

NOTE: Actual working range depends on RF signal absorption, reflection, and interference

Audio Frequency Response

25 to 15,000 Hz, +/- 2 dB

NOTE: Overall system frequency response depends on the microphone element.

Transmitter Audio Polarity

Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output

Transmitter Gain Adjustment Range

ULX1: 25 dB

ULX2: 25 dB

Receiver Audio Output Level (+/- 38 kHz deviation, 1 kHz tone)

XLR connector (into 600 ohm load): +3.9 dBV (line), -17 dBV (mic)

1/4 inch connector (into 3000 ohm load): -2 dBV

Impedance

ULX1 (input): 1 Megohm ULXS4, ULXP4 (output): 50 ohms at line level; 2000 ohms at mic level

Modulation

+/- 38 kHz deviation compressor-expander system with pre- and de-emphasis.

RF Power Output

ULX1, ULX2: 30 mW maximum

Dynamic Range: >100 dB, A-weighted
RF Sensitivity: 1.26 microVolt for 12 dB SINAD (typical)
Image Rejection: 80 dB typical
Spurious Rejection: 75 dB typical
Ultimate Quieting (reference +/- 38 kHz deviation): >105 dB, A-weighted
System Distortion (reference +/- 38 kHz deviation, 1 kHz modulation): 0.3% total harmonic distortion, typical
Power Requirements: ULX1, ULX2: 9V alkaline battery; 8.4 V Nicad optional; ULXS4, ULXP4: 14 - 18 Vdc (negative ground), 550 mA
Battery Life: 8 to 9 hours (with 9V alkaline battery)
Operating Temperature Range: -20 degrees to 49 degrees C (-4 degrees to 120 degrees F); NOTE: Battery characteristics may limit this range.
Overall Dimensions: ULX1: 96.5 mm H x 67 mm W x 26.7 mm D (3.86 x 2.68 x 1.10 in.); ULX2/SM58: 228.6 L x 51 mm Dia. (9 x 2 in); ULX2/BETA 58: 220.9 mm L x 51 mm Dia. (8.7 x 2 in.); ULX2/SM86: 213 mm L x 49 mm Dia. (8.4 in x 1.9 in); ULX2/87, ULX2/BETA 87: 223.5 mm L x 51 mm Dia. (8.8 x 2 in.) < /dd>; ULX4S: 43 mm H x 214 mm W x 163 mm D (1.72 in. x 8.56 in. x 6.52 in.); ULX4P: 43 mm H x 214 mm W x 172 mm D (1.72 in. x 8.56 in. x 6.88 in.)
Net Weight: ULX1: 79 g (2.8 oz.) without battery; ULX2/58, ULX2/BETA 58: 289 g (10.2 oz.) without battery; ULX2/SM86: 251 g (8.8 oz.) without battery; ULX2/87, ULX2/BETA 87: 258 g (9.1 oz.) without battery; ULXS4: 1049 g (2 lbs, 5 oz.); ULXP4: 1105 g (2 lbs, 7 oz.)

	shName	Availability
	RPW124 / VP68 Omnidirectional Wireless Capsule A convenient solution for ENG and interview field recording, the VP68 provides a forgiving polar pattern.	Where To Buy
	RPW120 Wireless Beta 87A Cartridge, Assembly and Grille Cartridge, Housing Assembly and Matte Grille for Wireless Beta 87A.	Where To Buy
	RPW114 Wireless SM86 Cartridge, Assembly & Grille Cartridge, Housing Assembly and Matte Grille for Wireless SM86.	Where To Buy
	RPW112 Wireless SM58 Cartridge, Assembly and Grille Cartridge, Housing Assembly and Matte Grille for Wireless SM58.	Where To Buy
	RPW116 Wireless SM87A Cartridge, Assembly w/Grille Cartridge, Housing Assembly and Matte Grille for Wireless SM87A.	Where To Buy
	RPW122 Wireless Beta 87C Cartridge, Assembly & Grille Cartridge, Housing Assembly and Matte Grille for Wireless Beta 87C.	Where To Buy
	RPW118 Wireless Beta 58A Cartridge, Assembly & Grille Cartridge, Housing Assembly and Matte Grille for Wireless Beta 58A.	Where To Buy