ULXP4Professional Diversity Receiver
Shure ULX® Professional wireless receivers offer an exceptional value in both performance and price, for both working musicians and sound installers. For use with ULX Professional Wireless systems.
The expanded feature set of the ULXP4 wireless receiver offers a direct path to full, clear audio signals.
Advanced settings and controls including lockable settings, automatic frequency selection, group scan function, and predictive diversity. More features below.
- RF Carrier Frequency Range
- 470.000 to 865.000 MHz (Available frequencies depend on the applicable regulations in the country where the system is used). Refer to the frequency supplement supplied with the system.
- Effective Range
- 100 m (300 ft.) under optimal conditions
- NOTE: Actual working range depends on RF signal absorption, reflection, and interference
- Audio Frequency Response
- 25 to 15,000 Hz, +/- 2 dB
- NOTE: Overall system frequency response depends on the microphone element.
- Transmitter Audio Polarity
- Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output
- Transmitter Gain Adjustment Range
- ULX1: 25 dB
- ULX2: 25 dB
- Receiver Audio Output Level (+/- 38 kHz deviation, 1 kHz tone)
- XLR connector (into 600 ohm load): +3.9 dBV (line), -17 dBV (mic)
- 1/4 inch connector (into 3000 ohm load): -2 dBV
- Impedance
- ULX1 (input): 1 Megohm ULXS4, ULXP4 (output): 50 ohms at line level; 2000 ohms at mic level
- Modulation
- +/- 38 kHz deviation compressor-expander system with pre- and de-emphasis.
- RF Power Output
- ULX1, ULX2: 30 mW maximum
- Dynamic Range
- >100 dB, A-weighted
- RF Sensitivity
- 1.26 microVolt for 12 dB SINAD (typical)
- Image Rejection
- 80 dB typical
- Spurious Rejection
- 75 dB typical
- Ultimate Quieting (reference +/- 38 kHz deviation)
- >105 dB, A-weighted
- System Distortion (reference +/- 38 kHz deviation, 1 kHz modulation)
- 0.3% total harmonic distortion, typical
- Power Requirements
- ULX1, ULX2: 9V alkaline battery; 8.4 V Nicad optional
- ULXS4, ULXP4: 14 - 18 Vdc (negative ground), 550 mA
- Battery Life
- 8 to 9 hours (with 9V alkaline battery)
- Operating Temperature Range
- -20 degrees to 49 degrees C (-4 degrees to 120 degrees F)
- NOTE: Battery characteristics may limit this range.
- Overall Dimensions
- ULX1: 96.5 mm H x 67 mm W x 26.7 mm D (3.86 x 2.68 x 1.10 in.)
- ULX2/SM58: 228.6 L x 51 mm Dia. (9 x 2 in)
- ULX2/BETA 58: 220.9 mm L x 51 mm Dia. (8.7 x 2 in.)
- ULX2/SM86: 213 mm L x 49 mm Dia. (8.4 in x 1.9 in)
- ULX2/87, ULX2/BETA 87: 223.5 mm L x 51 mm Dia. (8.8 x 2 in.)
- ULX4S: 43 mm H x 214 mm W x 163 mm D (1.72 in. x 8.56 in. x 6.52 in.)
- ULX4P: 43 mm H x 214 mm W x 172 mm D (1.72 in. x 8.56 in. x 6.88 in.)
- Net Weight
- ULX1: 79 g (2.8 oz.) without battery
- ULX2/58, ULX2/BETA 58: 289 g (10.2 oz.) without battery
- ULX2/SM86: 251 g (8.8 oz.) without battery
- ULX2/87, ULX2/BETA 87: 258 g (9.1 oz.) without battery
- ULXS4: 1049 g (2 lbs, 5 oz.)
- ULXP4: 1105 g (2 lbs, 7 oz.)
- ULXP4, ULXS4 Receiver Audio Output
-
Connector Unbalanced (1/4 in.) Balanced (XLR) Actual Impedance 3 kilohm Mic. Level: 1848 Ohms
Line Level: 75 OhmsPin Assignments Tip = Hot
Ring/Sleeve = Ground1 = Ground
2 = Hot
3 = ColdPhantom Power Protection? Yes Yes - ULXP4, ULXS4 Receiver Antenna Input
-
Connector Type BNC Actual Impedance 50 Ohms Nominal Input Level -95 to -30 dBm Maximum Input Level +6 dBm (-20 dBm recommended) Pin Assignments Shell = Ground, Center = Signal Voltage for Remote Power 12 Vdc, 150 mA maximum
| shName | Availability | |
|---|---|---|
|
UA874 Active Directional AntennaActive directional UHF antenna with integrated amplifier for improved wireless signal reception. |
Where To Buy |
|
UA221 Passive Antenna Splitter/Combiner KitAntenna Splitter/Combiner Kit, Passive, for UC4, SLX4, ULXS4, ULXP4, U4S, U4D, UR4S and UR4D. |
Where To Buy |
| User Guides | Language | File Size |
|---|---|---|
| ULX Wireless User Guide (English) | English | 1360 (kb) |
| ULX Wireless User Guide (French) | French | 1375 (kb) |
| ULX Wireless User Guide (German) | German | 1356 (kb) |
| ULX Wireless User Guide (Italian) | Italian | 1673 (kb) |
| ULX Wireless User Guide (Japanese) | Japanese | 5097 (kb) |
| ULX Wireless User Guide (Korean) | Korean | 2189 (kb) |
| ULX Wireless User Guide (Portuguese) | Portuguese | 1352 (kb) |
| ULX Wireless User Guide (Spanish) | Spanish | 1333 (kb) |



